Electromagnetic signal jammer is gradually used in daily lifeIn some cases, if the conditions required for high frequency and low frequency electromagnetic fields have a good protective effect, often composed of multilayer metal shielding using different materials.It is to protect the space between two regions of a barrier metal, to control the electric and magnetic fields and the electromagnetic waves and radiation induced by one region to another region.
Specifically, the shield is surrounded by a set of component circuits, the wifi jammer source, the cable, or the entire system at the same time, to prevent the outward diffusion of electromagnetic fields; shielding with the receiving circuit, a device or system surrounded, to protect them from the outside effects of electromagnetic fields.
Because shielding against electromagnetic interference from electromagnetic waves from outside and wires inside, cables, components, circuits, or systems are the energy absorption set (eddy current loss), the reflected energy (an electromagnetic wave reflected at the interface on the screen) and the offset energy (magnetic induction power generated in the electromagnetic reverse direction of the shielding layer, may be partially offset by interference electromagnetic), and thus have a shielding function against interference.Many people do not understand the principle of electromagnetic shielding, both a metal box, the box is grounded, it can act as an electromagnetic shield.
Under the guidance of this concept is the result of a failure.
Only two factors that affect the actual effectiveness of the protective shielding: one shielding surface must be electrically conductive continuous and the other conductor not directly penetrate the shield.
There are many points on a discontinuous conductive shield, the most important is a non-conductive space formed of different parts of the connecting shield.