logo
logo
Sign in

Things to Take Care of in iPhone DIY Repair by Mobile Phone LCDs Wholesale

avatar
Bob chao

Nowadays one of the most favorable solutions that people have found out for iPhone repair is buying screens from the third party stores who sell screens at much cheaper price as compared to the Apple Care store.

The screen than can be easily replaced at home. This saves a lot of money. Hence, people have started preferring this option more and more over the others. Not only these screens are cheap but their quality is quite similar to the original ones.

Hence, this makes a very fair deal which is why more and number of people consider this as an option. But one should be careful and take care of a few important things while doing the DIY repair.

This is important because if this is done properly mobile phone LCDs wholesale suppliers suggest that one might end up damaging the iPhone more. So, here are a few important tips for you to follow while you repair your iPhone:

Be Careful with Flex Cable:
As you will open your iPhone screen you will see a flex cable. This cable is very delicate. This fragile flex cable is responsible to attach the IC of the phone with the LCD. Hence, make sure that while carrying out the screen replacement you do not damage the flex cable.

If anything goes wrong with the cable the display on your phone might get disrupted. And, you would never want this. Hence, make sure that the flex cables remain tight and intact while you do the screen replacement.

There are many small pins that keep the cable connected. And, none of these pins should move from their place. Hence, follow the steps guided by wholesale mobile phone LCD screen replacement suppliers properly and make sure that none of these gets damaged.

Do Not Disturb the Logic Board:
Another important thing that you need to look after while making the screen replacement in your iPhone is the logic board. When you put the plug back make sure that the alignment is proper and the logic board do not get disturbed.

If the alignment is not proper then the functioning of the iPhone might get affected. The major effect will be on the touch screen which you would hate to experience. Hence, to avoid such situation try not to disturb the logic board at all.

Give Screen Some time:
You might be in a lot of hurry to see your iPhone screen working normally again like before. Hence, you might get tempted to check it but always wait for a while and give some time to the new LCD to properly adjust with your phone.

Any disturbance in hustle is not a very good idea for the proper functioning of the phone. Hence, it is good if you to wait for a while after doing the replacement and after that check the screen.

So, take care of these little things and keep your iPhone damage free while making the replacement.

collect
0
avatar
Bob chao
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more