logo
logo
Sign in

Know Everything about Roofing Terminology

avatar
Roofing Company
Know Everything about Roofing Terminology

To the world of okc roofing if you are a beginner, then it is sure that you're going to hear a lot of terms that you may not have any clue about. With the terminology it’s better to get to grips so that you can save yourself from a lot of confusion further down the road.

Common Terms

Below are listed some of the more common terms you may hear on roofing websites or from roofing contractors. Every house owner should know about all the listed terminology.

Fire Rating

The resistance a certain material will have to fire is determined by a fire rating. It is very much important to understand the fire rating of your house and roofing materials as house fires are a major concern. Materials are classified as having A, B or C class fire rating; with being the most fire resistant.

Shingles

These are a type of Oklahoma City roofing covering that consists of a number of overlapping tiles. You will notice that shingles are rectangular and flat and are laid in lines that go vertically up the roof.

Tiles are managed in a way that each tile is under lapped by a tile below and is overlapped by a tile above. Mostly you will see stone shingles used for housing but there are other materials such as wood or metal can be used as well.

Blistering

When bubbles or abnormalities are created in roofing materials blistering occurs. The cause of blistering is usually identified to be related to moisture that is collected from rain or snow. Blisters can be caused by moisture being trapped inside the material or by moisture being trapped under the material. Mostly this is seen in shingles.

Eave

The eave is the edge of the Oklahoma roofing which overhangs the side of your house wall. Across the bottom of your roof the eave goes horizontally. In roofing Eaves are used to keep water off of the walls. For home owners Eaves can often be a point of decoration.

A Few More Valuable Terms

In roofing there are dozens of other terms that are used and there is no need to understand them all. For those who are looking into upgrading preparing their roof for them there are some more terms that can be useful. The Salazar roofing is also very reliable.

Drip Edge

To stop water dropping into areas that could get damaged such as the deck or the eaves a drip edge is installed along the edge of roofing in Oklahoma City. In many cases with the help of metal a drip edge is constructed by the roofing contractors in Oklahoma.

Flashing

Flashing is a term that refers to installation of thin sheets of material onto your roof in order to prevent water from passing into unwanted areas. You'll often find shingles or other materials pointed outwards on or around chimneys. This is a perfect instance of flashing - the water will hit off of these materials, and prevent any moisture from arriving at the joints of a house.

collect
0
avatar
Roofing Company
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more