Screwed Pipe Fittings for Fire Fighting System

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Pipe Fittings, Accessories, which is used in practical immunity to chloride stress corrosion cracking (SCC) and resists polythionic acid SCC.

The chief characteristic of these Incoloy 825 Compression Fittings tubing is its corrosion resistance, where water – base coolants are preferred for high speed operations such as grinding, turning, or milling.

Incoloy 825 Compression Pipe Fittings is often used in sulfuric acid piping and vessels, marine exhaust systems, hot vessels for food, water and sea water.Also, Applications for these Incoloy 825 Accessories are similar to those for alloy 20, where high nickel content made it with effective stress corrosion cracking resistance performance.

If matching alloy is not available, then Alloy 825 Compression Fittings richer in the essential chemistry (Ni, Co, Cr, and Mo) should be used, where in addition all weld beads should be slightly convex.

These Alloy 825 Compression Pipe Fittings can be readily hot or cold worked.

Hot working should be in the range 870 Degree C – 1180 Degree C, finishing at 870 Degree C – 980 Degree C.Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe FittingsThe nickel content of Alloy 825 Accessories makes it resistant to chloride stress – corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 600 Pipe Fittings, which is non – magnetic and has excellent mechanical properties.

Our Inconel 600 Compression Fittings is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content.

These Inconel 600 Compression Pipe Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures.

Controlled chemical composition limits of our Inconel 600 Ferrule Pipe Fittings are applied in the nuclear industry to eliminate the risk of stress corrosion cracking by high purity water containing chloride ions.For these Inconel 600 Double Ferrule Pipe Fittings, the temperature range in between 1600 Degree F to 2250 Degree F (870 Degree C to 1230 Degree C) is the normal hot working temperature range.

Our Alloy 600 Compression Pipe Fittings is a superior choice for vacuum furnace fixtures and heat treat furnace components and fixtures.

Since the rate of cooling has no effect on the softening, these Alloy 600 Compression Fittings may be water quenched or air cooled.Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe FittingsAnnealing of our Alloy 600 Ferrule Pipe Fittings without excessive grain growth can be performed at 1850 Degree F for 15 minutes at temperature.