Benefits of Original Windows 10

Microsoft states that the new Windows 10 driver system can cause errors.

The Driver Verification can sometimes be a bit frustrating for the users, no matter even if it is intended to improve the security of the device.The recent change that Microsoft has made in its October 2020 Patch Tuesday updates regarding the Windows driver verification process might cause headaches for the users.There’s a straightforward well-intentioned reason behind this change.

This change has been issued because Microsoft doesn’t want to compromise on the Windows 10 systems and intends to prevent hardware drivers that are prone to malware and can get exploited.No doubt, Microsoft’s all-new driver verification model will help prevent users, but it can cause driver errors in Windows 10 systems.

These errors might occur in case if the company fails in verifying the publisher of the driver.In the current scenario, when the verification process fails, the users can see two driver error messages displayed by Windows 10.

They are:The first error message states: “Windows can’t verify the publisher of this driver software.”The second message states: “No signature was present in the subject.”As mentioned above, the error messages signify that Windows, while validating a driver, discovered a catalog file that was improperly formatted, leading to the failure of the installation process.New Driver SystemIf Windows fails to verify a driver, Microsoft’s support document will signify that the users: “should contact the driver vendor or device manufacturer (OEM) and ask them for an updated driver to correct the issue.”This, however, makes sense, but the users using Windows 10 would likely get frustrated.

This is because the users, after getting signified by the statement by Microsoft, will have to reach out to a company due to an odd request because of the change made by Microsoft into its operating system.Luckily these issues will only be experienced by the users when they will be applying the updates to the old driver.

Nowadays, most of the Windows 10 users are complaining that they can’t locate the button or any option to adjust the level of brightness in the Notification Center or the taskbar.

Users have to search for brightness settings in the Settings application, and it is a very lengthy process.

In order to get the brightness slider on the desktop, follow the instructions given below.Make Changes in the Device ManagerYou should follow the steps provided below:Hit the Windows and R buttons to launch the Run box.After that, insert ‘devmgmt.msc’ and hit the Enter button to launch the Device Manager.You should select the arrow icon beside the Device Manager and select the only device you locate there and right-click on it.Then select the option of Enable device, if applicable.Thereafter, click on the option of Properties and reach the Driver section.

Confirm if the Device Provider is anyone but Microsoft.

If yes, then click on UninstallGo to the Device Manager, then select the Action option and choose the option of ‘Scan for hardware changes,’ and this will look for devices without any driver, then install them again automatically.Now, verify any pop-ups or dialogs that may appear on the screen.Update the Graphic Card DriverYou should follow the steps provided below:Press the Windows and R keys to open the Run box.Thereafter, insert ‘devmgmt.msc’ and hit the Enter key to open the Device Manager.Extend the section of Display adapters and select the graphics card, then right-click on it.Go to the Uninstall Device option.You should verify any dialogs or pop-ups that may appear on the screen.Check the graphics card driver.

Insert the needed detail about the card and OS then select the Submit or Search option.Then you will see each driver on the list, and don’t forget to move down until you see the needed entry, select the name and click on the Download button.Once you see the screen of ‘Installation Options,’ select the option of ‘Custom (Advanced)’ before clicking on Next.Mark the box of ‘Perform a clean installation’ and then press the Next button to install the driver.Check if the problem has been resolved or not.By following the instructions mentioned above, you will be able to get back the missing brightness slider on your Windows 10 device.

Whether you own an integrated webcam or an additional one, there can be several issues with the functionality of the webcam on the Windows 10 PC as its drivers and software keep on updating and changing.

If there is any associated application for the webcam installed on your system, then it can also cause failure in loading webcam.

How to Solve Not Working Webcam On Windows 10Source By : https://gooddirectoery.uk.com/blog/how-to-fix-webcam-not-working-in-windows-10/Method 1: Disconnect and Connect the Webcam If you are using an external webcam, then you need to follow this simple method at first.

So first of all, plug out the webcam USB cable from your computer and laptop.

Press the power button to start the device and see if the webcam is working fine.Method 3: Running Windows Update  Do you know Windows Update can install the necessary drivers and missing system software components into the PC?

To launch Windows Update on Windows 10, see the instructions mentioned below:Open the Start Menu either by pressing the Start key or clicking on the start button on the lower-left corner of the screen.

If your Wi-Fi is working but the wired ethernet connection is not, then you should disable the WiFi.

When Windows 10 can access both the Wi-Fi and the ethernet connection, then it prioritizes the latter.

So, if you turn off the wi-fi, you can find out if the ethernet connection is working or not.

To fix ethernet connection issues, follow the solutions mentioned below.Update the Drivers ManuallyYou should pursue these steps provided below:Navigate to the Windows icon, and right-click on it, then choose the Device Manager option.After that, select the list of Network adapters and expand it, then check if any problems are using the devices.Then reach the Ethernet card and identify it.Later right-click on it, and choose the Properties option.Once you reach the screen of Device status, it may say that the device is operating correctly.Now, in case the icon of the Ethernet controller has an exclamation point or a question mark, then install the right driver for it again.Ensure that the Connection is Turned onYou should pursue these steps provided below:Go to the Windows menu, and right-click on it, then choose the Network connections.Now, right-click on it and choose the Enable option.Check the Connection DetailsYou should pursue these steps provided below:Reach the connection of Ethernet and right-click on it, then choose the Properties option.Once you reach the screen of ‘Ethernet Properties’, select the option of ‘Internet Protocol Version 4 (TCP/IPv4)’ then twice click on it.Turn on these options: ‘Obtain DNS server address automatically’ and ‘Obtain an IP address automatically.’Launch the Internet Connection TroubleshooterYou should pursue these steps provided below:Go to  the Search section.Thereafter, type and enter ‘Update and Security’.You have to choose the ‘Troubleshooter’ option.Now, choose and open the ‘Internet connection troubleshooter’ option.Check whether the connection of Ethernet is available.Finally, reboot the system and check once again.Roll Back the Network Adapter DriverYou should pursue these steps provided below:Open the Device Manager.Then select the Network adapters and choose the ‘network adapter’ option.Later, right-click on it then choose the Properties.Once you reach the Properties screen, choose the tab of Driver, and select the ‘Roll Back Driver’ option.Pursue the on-screen instructions to install an earlier version of the driver.In case the option is unavailable, that means there is no driver to roll back to.Disable the FirewallYou should pursue these steps provided below:Launch the Windows Firewall.Disable it.Now, check the Ethernet connection once again.Reset the NetworkYou should pursue these steps provided below:Reach the Settings screen, choose the ‘Network & Internet’ option, and then select the Status option.Then find the option of ‘Network reset.’Now, click on the button of ‘Reset now’ and hit the Yes button.By following the troubleshooting tips mentioned above, you will be able to fix the ethernet connection issues on your Windows 10 device.JEANNE E. WINFIELD arrived on the cyber security scene in the early 2000s when virus and malware were still new and slowly evolving.

Her longtime affair with writing with an interest in the cybersecurity industry, combined with her IT degree, has contributed to experience several aspects of security suite industry such as blogging at mcafee.com/activate.

Source : How to Fix Ethernet Connection Problems in Windows 10

Are you not able to download, installation, activation, and use of Windows 10 Operating System?

Contact Official Microsoft Windows 10 Support Number for instant solution.

Microsoft has finally announced the release date for Windows 11.

It will mark the first major operating system update in the last 6-years of the company.

The existing Windows users can download the new version of the Windows operating system for free.

Microsoft said in a blog post on Tuesday that the new OS won’t roll out to every compatible Windows device at once.

Windows 11 will be released on 5th October 2021.

However, the first general release of Windows 11 will include features like a more streamlined, Mac-like design, an updated Start menu, new multitasking tools, and integrated Microsoft Teams.

Windows 10 is the most convenient operating system as it is configurable as per its users’ needs.

It offers you with a lot of amazing built-in features to use.

It comes with a group editor policy feature that enables the users to make the organization wise changes by going through the settings.

However, this great feature is mainly usable by the IT admin to change the advanced settings, but other individuals can use it too.

If that is the case, then now, there is no need to go anywhere.Here, in the following article, you will get to know the way to disable the security settings from File Explorer on your Windows 10 computer.

We have mentioned the step-by-step process going through which you can use the Group Policy Editor feature to disable the security settings.

Windows 10 operating system makes it easier for every user to accomplish any computing task.

Any Windows 10 user can easily customize the settings on their computer system as per their preferences.

Here, we are going to provide you with multiple techniques that you can follow to create multiple folders at the same time on your Windows 10 computer.

You can use a keyboard shortcut “Ctrl + Shift + N” for creating a set of folders.

Here, we have mentioned two different techniques, and each one includes some simple steps that you will have to follow.

After clicking the Start button, type “cmd” in the search bar and then press the enter key.

“Mixer” is the broadcasting and streaming service provided by “Microsoft Corporations.” With the help of “Mixer,” you can make a video of your gaming skills and then stream or broadcast it as you wish.

However, you can encounter an error stating “Broadcasting isn’t working.” Read through the blog to fix the issue.Uses of Mixer“Mixer” is basically a build-in streaming service developed for gaming purposes.

Playing games not only entertains the players, but it also entertains and makes others excited when they watch fun game plays.Here are the uses and benefits of “Mixer” :The players can make their own professional gaming videos based on their skills and techniques.The player can broadcast his video online and share it with others through its streaming and sharing features.You need not download any other 3rd party software or program for streaming or broadcasting your game.You can watch your broadcasted game that you have streamed earlier.It has various features for streaming and broadcasting.Sometimes, while launching “Mixer” on Windows 10, it flashes an error message regarding broadcasting issues.The error message might be as “Broadcasting isn’t working,” or sometimes it crashes on just launching it in a second.Here is how to troubleshoot the issue of broadcasting in the following ways:1.

Resetting Game BarFollow these steps if you wish to reset the Mixer by resetting the “Game Bar”:First of all, tap on “‘Windows.”After that, go to the start menu and hit the “Settings” icon that appears as a cogwheel.Then, enter “Game Bar” in the provided search bar.After a while, the Game Bar option will open.

Then, you have to hit the “Game Bar” there.Now, select “Advanced.”Next, look for the “Reset” tab by scrolling down the page.Hit the “Reset” tab.2.

Permitting Windows 10 to Run Applications Under BackgroundWhen you play a specific game, some of the applications will become disabled to give you a smoother experience for playing the game.First of all, you have to make sure that the “Game Bar” is not included in the list of deactivated apps running in the background.You have to make sure that the apps running in the background are turned “ON.”First and foremost, tap on “Windows.”After that, hit the “Settings” option there.Now, tap on “Privacy.”Next, navigate to the section tab of Background Applications.Now, check the option “Let applications run in the background” slide bar is switched “On.” If not, turn it on instantly through the slide bar.I’m John Smith.

System restore is very useful to the users who have no time to restore manually.

Restore point able to help you to do your work without any condition, and save your lots of time, you waste in troubleshooting.

If Windows creates Systems Restored Points Frequently, then you have to make your Windows PC arrange for the scheduled time.How to Perform System Restore Points automaticallyWe know that Windows owned inbuilt features and settings, where users quickly set their Windows PC to restore Points, every day, or weekly in one click, however, there is also a manually setting available.

If you make another attempt, then it will be skipped automatically.

Here are the steps to do.Launched Open Registry Editor and cruise the listed keys.Double click on SystemRestorePointCreationFrequency to edit DWORD.Change the entire value 0.Always remember that Windows cant skip Creating restore point.By System Restore point methodCheckpoint-Computer -Description “TWC – Restore Point” -RestorePointtype MODIFY_SETTING (Command will be used to treat Restore point).Here are some examples of the command helps you to create a restore point.How to APPLICATION INSTALLHow To APPLICATION UNINSTALLHow To DEVICE DRIVER INSTALLHow To CANCELED OPERATIONYou can similarly create a restore point using WMIC.EXE.

here we explained how to Generate the Restore point automatically./Namespace:\\root\default Path SystemRestore Call CreateRestorePoint “Startup Restore Point”, 100, 7Create a Task in Task SchedulerIn the above task mentioned scheduler with power shell where you have to create and schedule tasks.To promote type taskschd.

For basic users, Windows Defender provides sufficient safety towards malware and different cyber threats.

In different phrases, Windows 10 has a safety system that’s good enough for many users.

For these users, choosing a third-party answer isn’t required.

Let’s discover out if Windows 10 requires a third-party antivirus.Microsoft continues to enhance Windows Defender to make it more effective.

Right now, in case you are tuned to the evolution of the desktop working systems of Microsoft, you’ll be able to discover that the software big keeps on improving WD.For example, if you consider the April 2018 update, you’ll come to know that the Windows Defender has been upgraded to Windows Defender Security Center.

This upgrade provides all of the security features you want.

You might remember all the partitions & external drive list connected to your windows machine in the selection box and accidentally select the boot drive instead of any other drives.

Although, it is very easy to identify all the drives, at times, the information about partition name or the drive letter is not shown properly due to which user may get confused and select a wrong drive.

Whenever you format your Windows partitions, the entire drive becomes inaccessible and cannot recognize by other windows systems.

And If you reinstalled the operating system to fix these issues, then also you will lose your personal data that are saved on C drive.

If you are troubled with the deletion of Windows partition unintentionally and you might have tried a lot of methods and still looking for a better option to recover files.

Generally, when a file is deleted from a drive, it only removes the file pointer and marks the space free for a new file storage.