Not only is Stainless Steel traditional, but it also brings a more polished appearance to a kitchen; it conveys an extreme, solid feeling and creates a picture of actual cooking taking place there.
And stainless steel, on the whole, is simple to clean. It's not going to scratch or peel or smear. But for indestructibility, don't mistake the durability; stainless steel will crack and rust, and by far, the most significant concern owners have is that the layer reveals fingerprints.
A wax-based spray designed for the application of stainless steel is the safest way to avoid fingerprints from turning up. There's a variety on the market, but Pash likes the Stainless Steel Cleaner & Polish from 3M. Wear gloves while using the paint, no matter what type you select. Sprinkle a thin mist on the stainless steel surface, but do not overspray; if you rub the metal, it gets too greasy. Wait after spraying for one to two minutes, then wipe away with a clean, lint-free cloth (microfiber cloths fit best). Making sure you rub the grain against the gun. The spray would put back the material's initial luster and leave a thin coating of wax that can survive scratches and keep Smudge Proof Appliances. And they'll be quick to brush away if fingerprints show.
No matter what you do, once you place it on the waxy sheet, please do not use bleach cleaners; it will ruin the surface luster. And neither do use oil-based cleansers; they can draw lint. The surface may be rubbed by abrasive cleaners such as Gentle Scrub or Scotch-Brite pads. The other reason you may choose to use an abrasive pad is when there's an accidental scrape. If this occurs, brush on the grating some of the paint and then softly fill it in with steel wool or a Scotch-Brite surface. Again, still, brush together with the fiber until the marks are no longer noticeable. Spray a little more of the paint on the scratch if needed; the wax will help fill in blemishes.
The very worst thing about stainless steel will happen scratch. Dents are hard to fix unless you can reach under the sheet of stainless steel to kick the dent away. Stainless steel appliances are one of the hallmarks of new kitchens due to their elegant, futuristic appearance. The expected arrival is that of clean, smooth, polished surfaces, but the fingerprints eventually collecting stainless steel will weaken the aesthetic. There's no way to fingerprint your stainless steel appliances. Still, daily washing will avoid the issue from getting out of control, and certain kitchen products can provide a protective layer between your devices and the hands of your relatives. For any point in the phase, you have various choices, so mix and match whatever supply you want to use.