AMETEK Fluoropolymer product is the leading solution provider for shell and tube heat exchangers. We are the only company in the market that manufactures the shell and tube with FEP and PFA tubing. Unlike other shell and tube heat exchangers in the market, AMETEK products avoid scaling and fouling by using tubing made from essentially chemically inert fluoropolymers.
The FEP and PFA tubing material have an advantage over heat exchangers made with metal, graphite, or glass. The shell and tube heat constructed with metal corrodes causes maintenance and reliability problems when it interacts or mixes with harsh materials. It can lead to failure because the tube is under pressure. The shell and tube heat made by graphite and glass can cause catastrophic failure and costly downtime because of cracks in tubes from thermal and mechanical shock. That’s why AMETEK products construct shell and tube heat exchangers with FEP and PFA tubing material to give you durability and reliability.
The shell and tube heat exchangers of AMETEK products feature braided tubing bundles and unique fused ends that provide significantly better heat transfer from a smaller footprint than similar heat exchangers provide which allows any kind of installation in virtually any type of tank configuration.
AMETEK’s products ensure a long service life with no leaks or thermo-mechanical failures commonly found on other heat exchangers because of its proprietary honeycomb process. To know more about the manufacturing of shells and tube heat exchangers you can contact a sales manager or request a quote.
AMETEK’s Fluoropolymer product provides 4 types of shell and tube heat exchangers which are durable with no leaks. These are as follows:
- i) PV-4 Series 3” Shell
- ii) 30-Series Mid-Size 4” Shell
iii) 30-Series Model 218, 525 and 1000
- iv) 900-Series Large Capacity
These are explained in detail with their features.
- PV-4 Series 3” Shell
These PV-4 Series 3” Shell are small and affordable heat exchangers. These shell heat exchangers are 6 feet in length and are suitable for low flow applications like marine applications, pulp, and paper applications. They are designed in a way that maximizes the heat transfer performance of FEP or PFA, as well as the performance of “Q” Series fluoropolymer tubing.
Its features are as follows:
- It provides high thermal efficiency
- They have corrosion-resistant fluoropolymer construction
- It comes in a unique bundle & baffle system
- It has FEP, PFA, or "Q" Series tubing
- CPVC shell material is used.
- b) 30-Series Mid-Size 4” Shell
This series uses a single-pass, typically counter-current flow design and is 11 feet in length. Tube bundles are joined together to create honeycomb tube sheets.The flexible tube bundle is easily removable for maintenance as heads are fluoropolymer-lined. It is constructed with carbon steel shells and if you want any other material it is also constructed on request.
The features are as follows:
- High thermal efficiency
- Corrosion-resistant construction
- Unique seal system
- FEP or Q-Series tubing
- Carbon steel shells standard (others available upon request)
- c) 30-Series Model 218, 525 and 1000
It is a single pass and typically countercurrent-flow unit designed for heating, cooling, and condensing. Flexible fluoropolymer tube bundles are joined together to form unique honeycomb tube sheets that provide physical robustness. The difference between models 218, 525, and 1000 is the number of tubes per bundle, which increases the heat transfer area. Its features are as follows:
- High thermal efficiency
- Corrosion-resistant construction
- Unique seal system
- FEP or Q-Series tubing
- Carbon steel shells standard (others available upon request)
- d) 900-Series Large Capacity
AMETEK’s largest heat exchangers have 14-inch diameter shells and many fluoropolymer tubes, which provide high flow capacity and low-pressure drop. Shells are available in a variety of materials, including carbon steel, fluoropolymer-lined carbon steel, and stainless steel. Tube lengths available up to 24 feet.
Its features are as follows:
- High flow capacity
- Low-pressure drop
- Unmatched corrosion resistance
- FEP and PFA series tubing
- Variety of shell materials
The research report includes specific segments by region (country), by company, by Type and by Application.
This study provides information about the sales and revenue during the historic and forecasted period of 2015 to 2026.
Understanding the segments helps in identifying the importance of different factors that aid the market growth.
Download FREE Sample of this Report @ https://www.24chemicalresearch.com/download-sample/65368/global-heat-resistant-coatings-2020-990Segment by Type, the Heat Resistant Coatings market is segmented into:SiliconeEpoxyAcrylicPolyesterModified ResinsSegment by Application:Automotive & TransportationIndustrialConsumer GoodsBuilding & ConstructionGlobal Heat Resistant Coatings Market: Regional AnalysisThe Heat Resistant Coatings market is analysed and market size information is provided by regions (countries).
The report includes country-wise and region-wise market size for the period 2015-2026.
It also includes market size and forecast by Type and by Application segment in terms of sales and revenue for the period 2015-2026.The key regions covered in the Heat Resistant Coatings market report are:North AmericaU.S.CanadaEuropeGermanyFranceU.K.ItalyRussiaAsia-PacificChinaJapanSouth KoreaIndiaAustraliaTaiwanIndonesiaThailandMalaysiaPhilippinesVietnamLatin AmericaMexicoBrazilArgentinaMiddle East & AfricaTurkeySaudi ArabiaU.A.EGlobal Heat Resistant Coatings Market: Competitive AnalysisThis section of the report identifies various key manufacturers of the market.
