Sachiya Steel International is one of the prominent stockiest and distributor of quality Nickel 200 Washers, which can be used in pressure vessel construction up to 300 Degree C. Nickel 200 Flat Washers is age – harden able Cu – Ni casting alloys with additions of aluminum, chromium or beryllium must also be mentioned.

Nickel 200 Lock Washer with 2 % Al can be used in the as – cast state or age – hardened, where the largest increase of strength is achieved by adding beryllium – after age hardening. An alloy of this type, such as Nickel 200 Sealing Washers, is already in use for seawater applications.

Nickel 200 Split Washer are high – strength age – harden able Cu – Ni casting alloys containing up to 6 % tin, usually with further additions such as lead and zinc. Like other alloys, Nickel 200 Slot Washer possess excellent mechanical properties at low temperatures, which are shown for an alloy containing 20 % Ni.

Nickel 200 Washers | Nickel 200 Washers | Nickel 200 Washers | Nickel 200 Washers | Nickel 200 Washers | Nickel 200 Washers | Nickel 200 Washers

Tensile strength in Nickel 200 Machine Washers decreases with falling temperature without a marked reduction of elongation and reduction of area. Nickel 200 Star Washers exhibit no embrittlement at low temperatures, which are therefore very suitable for applications in cryogenic engineering.

The hot strength of Nickel 200 Wire Spring Washer increases with only a small addition of nickel. The effect of Nickel 200 Flat Spring Washers on the softening of cold – rolled Cu – Ni alloys at elevated temperatures.