Boost up the speed of your existing Wi-Fi network with Netgear AC1200 WiFi range extender Setup without WPS at your home. This Wi-Fi Range Extender will improve the performance of your current Wi-Fi network and extend the signals to reach locations with poor connectivity. Netgear AC1200 WiFi range extender can be your ideal choice if you are having trouble playing games for streaming online videos while connected to the internet. To learn how to set up the extender without a WPS button, read on and proceed with the simple instructions.
You can use the web page set up for setting up your extender if it does not support the WPS button. Here are the step by step guidelines to follow:
-
Check whether your computer is connected to the internet.
-
If yes, disconnect your device from the network.
-
After this, place your extender closer to the router.
-
Turn on the extender and let the device complete the booting process. The extender will take about 20 minutes for the boot.
-
Once the extender has successfully completed its boot process, the light on a device will become steady green.
-
Also, the other nearby light will flash in red.
-
After this, you need to connect your device to the extender following the instructions below.
Connect the device to the extender using wireless connectivity:
-
Click on the button present on the taskbar of your system. Proceed next and learn how to set up the extender without WPS.
-
Now, you can see the list of a network showing on your screen.
-
Choose the extender and network you would like to connect with.
-
To complete the connection setup, you are prompted to enter the password for your extender.
-
Find the extender wireless password on the backside of the extender guide.
-
Once your device and Wi-Fi extender are connected to the same Wi-Fi network, you can proceed with the web-based setup.
If you want to connect the extender through a wired connection, follow the steps below:
-
Open any preferred web browsers on your computer.
-
In the search field, type the IP address of your Wi-Fi Range Extender.
-
A login dialogue box will appear on your screen, here you need to provide the extender admin password.
-
Type the password and hit the login button.
-
The setup wizard will appear, hit the Start button.
-
Proceed with the on-screen guidelines and once you are done with the connection setup, hit the finish button.
The extender configuration has been completed successfully, you won't face any network issue, and your browser will not close the connection while surfing. We hope that these simple steps will help you with the Netgear AC1200 WiFi range extender setup without WPS button for your device. All the set of guidelines are easy to follow and let you complete the task without any hassle. But, if you still have a doubt or there is a technical query hampering your experience, contact the experts. The professionals are available around the clock to help, and share the best possible solution to fix your problem.
In case you do not want to spend any money on a brand new GPU, then the only thing you can do is to increase dedicated video RAM in Windows 10.
In this article, you will get different ways to complete this procedure by using the BIOS and Registry Editor.Steps to Increase Dedicated VRAM Using BIOS Go through the steps mentioned below to know how you can increase the Dedicated VRAM through BIOS.
Make sure that your computer is turned on already to complete this procedure:• Start the system again.• Type the BIOS settings tab.• You need to press on the dedicated BIOS key while going through the booting process.• Click on F2, F5, F8, or Delete key.• In case it doesn’t solve this issue, then find online for particular steps on typing the BIOS settings.• After going to the BIOS menu, find the menu which is same as Graphics Settings, Video Settings, or VGA Share Memory Size.• You will get it below the Advanced menu.• Start saving the configuration.• Start the system again.• You need to use the same procedure mentioned above to check if you have successfully increased the VRAM count.Steps to Increase Dedicated VRAM Using Registry EditorDo you want to increase dedicated VRAM?
Then try to use the Registry Editor to complete this procedure on your Windows 10 PC:• Click on the Windows and R keys together.• It will open the Run prompt box.• Enter “regedit” in the given box.• Click on the Enter option.• It will launch the Registry Editor option.• In the Registry Editor, start using the left side panel to go to the below-mentioned command:HKEY_LOCAL_MACHINE/Software/Intel• You need to right-click on the Intel key.• Select the New option.• Click on the Key button.• Give a title to the GMM.• After choosing the GMM key.• Go to the right-hand panel.• Choose the New option.• Choose a Dword Value.• You need to give title as DedicatedSegmentSize.• Click twice on the DedicatedSegmentSize, change the Base to Decimal.• Place value from 0 to 512.• It is the value which is an amount of VRAM showing in the Adapter Properties menu list.• Start saving the changes you have done.• Start the system again to save the changes.• Check if you have successfully increased dedicated video RAM in Windows 10.Steps for Checking the video RAM amountDo you want to check the video RAM amount?
Then go through the steps mentioned below to do so:• Click on the Windows and R keys together.• It will launch the Run prompt box.• Enter the “mssettings:easeofaccess-display”• Press on the Enter option.• It will launch the Display option.• It is located in the Settings application.• Go down and press on the Advanced display settings tab.• Press on the Display adapter properties option.• Go through the VRAM count given below the Adapter information at Dedicated Video Memory option.Emily Williams is a self-professed security expert; she has been making the people aware of the security threats.
Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media.
Al Manar Construction LLC is proud to be one of the Sultanate of Omanʼs rising contracting companies today, its services and reach have gradually expanded far and wide.
Al Manar Construction LLC has consistently met client expectations and successfully completed several projects within the set timelines and budgets.
Want to know how to connect two monitors to a laptop?
Follow this article to the end, and we bet you will never go back to a single screen again.Things are easy when you already have two video ports on your laptop; however, if you don’t have two video ports, you will need a display port splitter adapter, Thunderbolt port, or a USB external display adapter.
Connect Two Monitors with a USB External Display AdapterA USB External Display Adapter can turn up your USB port into an external display port.
Mainly these adapters fulfill the role of adding a Display Port, DVI port, HDMI, or VGA port to the laptops.You will have to install its driver software before installing the adapter.
Once you have installed the driver software, shut down your PC.
After that, turn on your PC and let it complete the booting process, and then you may move on to the further steps.Make adjustments in your monitor to let your mouse’s cursor flow very smoothly between the additional monitors and your laptop display.
Mahendra Arana offers a comfortable living in Electronic city Phase 2 Bangalore, with everything you would want or desire, Modern designs and stylish finishes dominates the homes here.
Spread over 9.2 acres 744 units offering 2 & 3 BHK in prime Electronics City the apartment’s ranges from 59L onwards.
With 40 Plus amenities available here which includes club houses, sporting facilities and an equal number of children activity spaces.
Mahendra Homes, a name that is synonymous with quality and eloquent homes in Bangalore.
All this with premium Specifications and finishes, Large Living areas, well-designed Dining / Kitchen Areas, Beautiful expansive green Terraces and cozy bedrooms.
Everything has been designed keeping you in mind.Sitting amidst a fully developed Ananth Nagar, you're within a 10 minute radius of all your basic needs and conveniences.
In recent time (maybe from May) new Youtubers could not complete all monetization process.
Everyone gets stuck in process one.
After clicking on the Start button on step 1 and then accept all condition and click on next it seems like nothing happen.
Here is the screenshot which I took from the Youtube forum.
Well Due to Technical issue People having Problem of this.
A Youtube Forum Community manager confirm this message.
Learn the process to find your Mac address on Laptop?Do you need to find your Mac address on Laptop for some purpose but unaware of the right procedure?
Mac address is the unique identifier for the network adapters of your Laptop.
A few times, Laptop users might require accessing the Mac address due to some important work which they can navigate through a simple process.
Therefore if you are looking for the information about how to find a Mac address on my laptop?
Kindly stay on this page and collect the right details from below.First of all, turn on your Laptop and then navigate to the start buttonThen from the start menu you require to open the run programAfter that, you have to enter cmd in the run box and hit enterNext on the command prompt, you have to enter ipconfig /all with a space between g and /Then you will be able to see your Mac address physically as a 6 groups seriesHereafter, get your Mac address starting with 2 digits, then letters and then number by a separation of dashesAt last, ensure to collect the Mac address of the right network adapter as the list contains manyTherefore, complete details related to your query about how to find a Mac address on my laptop is discussed successfully through the information defined above.
Apart from that, if you need further assistance related to any other technical support about the Mac address, you can connect to the customer service center of Apple.
