Sachiya Steel International is a recognized trader, dealer and Stockist of C45 Carbon Steel Plates, which is also used in domestic, professional or industrial areas. The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel.
Manganese and nickel in SC 45 Carbon Steel Coils lower the eutectoid temperature and are known as austenite stabilizing elements. With enough of these elements the austenitic structure of C45 Carbon Steel Slatting Coils may be obtained at room temperature. Sachiya Steel International is one of the well – known for high quality of SC 45 Carbon Steel Perforated Coils, which covers nominal wall and minimum wall seamless ferrite steel pipe intended for high temperature service.
C45 Carbon Steel Plates | C45 Carbon Steel Plates | C45 Carbon Steel Plates | C45 Carbon Steel Plates | C45 Carbon Steel Plates | C45 Carbon Steel Plates | C45 Carbon Steel Plates
Carbide – forming elements in C45 CS Plates raise the eutectoid temperature, where these elements are known as ferrite stabilizing elements. Deposition of complex and heavy organic compounds of SC 45 CS Coils in crude and heavy oil can cause a number of severe problems up to pipeline blocking. C45 CS Slatting Coils are developed for energy – related applications involving oil and gas drilling and therefore are subjected to stresses in machine parts. The easily exchangeable test pipeline in SC 45 CS Perforated Coils is filled with the sample and cooled down to a set temperature.
C45 Plates Specifications |
||
Thickness | : | 2-600mm |
Width |
: | 4200-11000mm |
Length |
: | 3000-18000mm |
Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR) |
Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc. |
C45 Plates Chemical Composition
Grade | C | Mn | P | S | Cr | Si |
C45 | 0.42-0.50 | 0.50-0.80 | 0.025 max | 0.025 max | 0.20-0.40 | 0.15-0.35 |
C45 Sheets, Plates Mechanical Properties
Grade | Condition | Yield Strength R°(Mpa) |
Tensile Strength Rm (Mpa) |
Elon- gation A5(%) |
Hardness HRC |
Quenching Temperature (℃) |
Benda- bility |
Nominal Thickness,t 1.95mm≤t≤10.0mm |
|
Rolled | Annealed | ||||||||
C45 | Rolled Annealed Water-quenched Oil quenched |
460 330 |
750 540 2270 1980 |
18 30 |
58 55 |
820 860 |
Min.reco-mmended Bending radius (≤90°) |
2.0 ×t |
1.0×t |
C45 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry