Sachiya Steel International is a known trading, supplying, exporting and manufacturing unit of Alloy Steel F22 Pipe Flanges, where there is certainly minimal use with hydrochloric acids. Alloy Steel F22 Slip On Flanges performs much better than other austenitic stainless steel steels because of the much higher alloying of nickel as well as molybdenum. Thus, cheaper raw materials in Alloy Steel F22 Threaded Flanges, such as high – carbon ferrochromium, may be used in the initial melting operation.
Alloy Steel F22 Weld Neck Flanges typically contains 11.5 percent to 18 percent of chromium and up to 1.2 percent carbon with nickel sometimes added. Alloy Steel F22 Socket Weld Flanges are harden able by heat treatment, have modest corrosion resistance, and are employed in cutlery, surgical instruments, wrenches, and turbines. Alloy Steel F22 Blind Flanges is an alloy that displays high resistance to corrosion, particularly against acidic environments.
Additions of copper and carbon give Alloy Steel F22 Lap Joint Flanges distinct characteristics, with the copper serving as a strengthening agent against corrosive acids. The small amount of carbon in its compositions gives Alloy Steel F22 Ring Joint Type Flanges increased weldability and cleanliness against continual wear and tear. The combination of chromium, nickel, molybdenum and copper in its makeup serve to give Alloy Steel F22 Spectacle Blind Flanges exceptional resistance against sulphuric acid. Alloy Steel F22 Spacer Flanges is developed to prevent corrosion where such acids are utilized or applied.
|
Alloy Steel F22 Pipe Flanges Specifications
|
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Grade | C | Mn | Si | P | S | Cr | Mo |
| Alloy Steel F22 | 0.50.15 max | 0.3-0.6 | 0.5 | 0.03 | 0.03 | 4-6 | 0.44-0.65 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 205 | 415 | 20 % |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges, where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges| Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges Stainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
Sachiya Steel International is a known supplying, trading, exporting and manufacturing unit of Alloy Steel F12 Flanges, where its maximum service temperature is at 450 Degree C. This distortion – free (non – warping) characteristic of Alloy Steel F12 Slip On Flanges is a significant advantage over many other high – strength steels.
However, there is restricted use of Alloy Steel F12 Threaded Flange with hydrochloric acids.Alloy Steel F12 Blind Flange also possesses a great resistance to pitting in chloride solutions, a great resistance to crevice and stress corrosion cracking.
There is absolutely no risk of inter – crystalline corrosion on cooling or welding in Alloy Steel F12 Socket Weld Flanges due to the low carbon content.
These continuous – annealing furnaces in Alloy Steel F12 Weld Neck Flanges are usually heated by gas – fired radiation tubes in order to separate combustion gases from the inert atmosphere surrounding the stripScale consists of thin layers of iron oxide crystals in Alloy Steel F12 Lap Joint Flanges, of which the chemical compositions, structures, and densities vary according to the temperature, oxidizing conditions, and steel properties that are present during their formation.
Alloy Steel F12 Ring Joint Type Flanges also provides an excellent protection to pitting in chloride solutions, an excellent resistance to both crevice and then stress corrosion cracking.
Therefore, Alloy Steel F12 Spectacle Blind Flanges is classified as a super alloy / high performance alloy.Alloy Steel F12 Pipe Flange SpecificationsSpecifications:ASTM A182 / ASME SA182Size:1/2″ (15 NB) to 48″ (1200NB)Standards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Sachiya Steel International is a manufacturer and Exporter of first-rate Buttweld 180 Degree Pipe Bend.
A pipe bending machine is a vital component for any project involving pipe bending, especially large scale bending.A pipe bending system enables the task and is able to complete multiple jobs in less time than when operating by hand.
Elbow pipe fitting is also commonly referred to as bends, and is available in a variety of products such as nickel alloys, stainless steel, alloy steel, carbon steel, duplex, maize duplex and cupro-nickel etc.
In most cases this bevel allows full penetration welding.
Stainless Steel 180 Degree Bends and Carbon Steel 180 Degree Bends are top best-sellers on both the national and international sector in the Sachiya Steel International Pipe Bends list.
180 Degree Bends SpecificationsDimensions:ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Size:2″NB TO 18″ NBType:Seamless / ERW / Welded / FabricatedBend Radii:75 / 100 / 150 / 250 / 300 / 500 / 800 / 1,000 / 1,200 / 1,500 mmBending Radius(R):R=1D, 2D, 3D, 5D, 6D, 8D, 10D or CustomBending angle (θ):15°, 30°, 45°, 60°, 90°, 135°, 180°Material & Grades of 180 Degree Pipe Bend :Stainless Steel 180 Degree Pipe Bend:ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404Duplex & Super Duplex Steel 180 Degree Pipe Bend:ASTM A 815, ASME SA 815 UNS NO S31803, S32205.
Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 316 Buttweld Fittings, which is being offered in different sizes and shapes to our clients.
In addition to having an excellent track record for recyclability and end of life recapture rates, our Stainless Steel 316 Elbow also meets another important criterion of a sustainable material.
If the right stainless steel is selected to match the corrosion conditions of the environment, these Stainless Steel 316 Tee Pipe Fittings can typically meet the lifetime needs of a project.While other materials may lose effectiveness over time, our Stainless Steel 316 Cross Pipe Fittings can retain both functionality and appearance over extended lengths of time.
It has been exposed to heavy pollution for most its existence, has had very minimal cleaning, and yet these Stainless Steel 316 Reducer is still considered to be in excellent condition.
Although our Stainless Steel 316 Bend Pipe Fittings has only been in production for many years, and so theoretically stainless steel should be able to last centuries when properly selected.Stainless Steel 316 Buttweld Fittings | Stainless Steel 316 Buttweld Fittings | Stainless Steel 316 Buttweld Fittings | Stainless Steel 316 Buttweld Fittings | Stainless Steel 316 Buttweld Fittings | Stainless Steel 316 Buttweld FittingsThese Stainless Steel 316 Stub End is particularly exciting to consider that some of the same factors that contribute to making stainless steel an excellent environmental choice, can also lead to making it an excellent economical choice, especially when considering the lifetime costs of a project.Stainless Steel SS 316/316L Pipe Fittings SpecificationsSpecifications:ASTM A403 / ASME SA403Size:1/8” NB TO 48” NB.
(Seamless & 100% X-Ray Welded, Fabricated)Standards:ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Thickness:5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75Type:Seamless / Welded / FabricatedSS 316/316L Pipe Fittings Chemical CompositionGradeCMnSiPSCrMoNiN316min.
