Sachiya Steel International is one of the pioneer manufacturer and trader of AISI 4130 Steel Angle, Channel, Beam, Chain, which has excellent quality that the possibility of designing thinner walls can save cost. Often referred to as an excellent grade due to the molybdenum content, AISI 4130 Steel Angle has the ability to withstand high temperatures and maintain strength under volatile conditions. Commonly used as a replacement in critical components of larger constructions where SS 316L or SS 317L has failed by pitting or chloride stress corrosion cracking, AISI 4130 C-Channel withstands the same corrosive environments.
In new construction, AISI 4130 Chain has been found in many cases to be a technically adequate and more cost efficient substitute for other nickel based alloys and titanium, where the allowable design values may be about 50 % higher than those for standard austenitic steels. AISI 4130 I-Beam is often considered a “high end” austenitic stainless, which is further readily fabricated and welded.
AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle | AISI 4130 Steel Angle |AISI 4130 Steel Angle
AISI 4130 H-Beam offers chloride resistance superior to that of other alloys and is especially suited for high chloride environments such as brackish water or seawater. AISI 4130 T-Beam is an austenitic stainless steel, compatible with the common austenitic stainless steels, designed with high levels of chromium, molybdenum, and nitrogen for maximum resistance to pitting and crevice corrosion. Offered to client’s at the most reasonable rate possible, the offered range of AISI 4130 Steel Angle is known to have a high preference in the market.
AISI 4130 Angle, Channel, Beam, Chain Specifications |
||
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| AISI 4130 Angle |
: | 5mm to 9mm |
| AISI 4130 Channel |
: | 40mm*20mm~300mm*300mm |
| AISI 4130 Beam | : | 3″ thru 12.31″ |
| AISI 4130 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
4130 AISI Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Fe | Mo | Ni | Cr |
| AISI 4130 | 0.28-0.33 | 0.40-0.60 | 0.15-0.35 | 0.035 max | 0.025 MAX | 97.3-98.22 | 0.15-0.25 | 0.50 max | 0.80-1.10 |
AISI 4130 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.85 g/cm3 | 1432 ℃ | 560 | 460 | 21.50% |
Equivalent Grades for 4130 AISI Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| AISI 4130 | 1.7218 | G41300 | JIS G4105 | BS 970 | – | – | 25CrMo4 |
Sachiya Steel International is one of the prominent Manufacture & exporter in Incoloy Alloy 20 Tube to Female Pipes, which is commercially pure (99.6 %) wrought nickel.
Alloy 20 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Alloy 20 Compression Fittings can suffer from graphitization which can result in severely compromised properties.
All hot working and cold working practices can be utilized when shaping Alloy 20 Female Connector Fittings.
Hot working temperatures for Alloy 20 Ferrule Fittings should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F.Annealing of Alloy 20 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for Carpenter 20 Compression Tube Fittings can greatly influence the mechanical properties and structure of the material.
When operating temperatures are expected to exceed 600 Degree F, carbon content in Carpenter 20 Female Connector Fittings becomes critical.Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female Pipes | Incoloy Alloy 20 Tube to Female PipesThe lower carbon content of Carpenter 20 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement.
Carpenter 20 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1.
Sachiya Steel International offers a wide range of Hastelloy C276 Threaded Forged Fittings, which is available in variegated specifications which suits diverse requirements of our esteemed customers.
Hastelloy C276 Forged Threaded Elbow Fittings (UNS N10276) has resisted the formation of grain boundary precipitates in the weld heat – affected zone, making it a candidate for most chemical and petrochemical processing applications in the as – welded condition.
Hastelloy C276 Forged Threaded Tee Fittings has exceptional resistance to a wide variety of chemical environments.Hastelloy C276 Forged Threaded Cross Fittings is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition.
Hastelloy C276 Forged Threaded Cap Fittings is weldable by all common methods except that excessive heat input should be avoided.
Meanwhile, these Hastelloy C276 Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings | Hastelloy C276 Threaded Forged Fittings Hastelloy C276 Forged Threaded Coupling Fittings show only slightly better non – corrosive properties than straight carbon – steels, and the reason for their wide use is the high physical properties which will be brought about by heat -treatment.
All of the common methods of welding can be used in Hastelloy C276 Forged Threaded Union Fittings, although the oxyacetylene and submerged arc processes are not recommended when the fabricated item is for use in corrosion service.Hastelloy C276 Threaded Fittings SpecificationsSpecifications:ASTM B564 & ASME B564Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Fittings Hastelloy C276 Forged Threaded Fittings Chemical CompositionGradeCMnSiSCoNiCrFeMoPC2760.01 max1.00 max0.08 max0.03 max2.50 max50.99 min*14.50 – 16.504.00 – 7.0015.0 – 17.00.04 maxHastelloy C276 Threaded Fitting Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.89 g/cm31370 °C (2500 °F)Psi – 1,15,000 , MPa – 790Psi – 52000 , MPa – 35540 %Equivalent Grades for C276 Hastelloy Forged Threaded FittingsSTANDARDWERKSTOFF NR.UNSJISGOSTENORC2762.4819N10276NW 0276ХН65МВУNiMo16Cr15WЭП760Hastelloy C276 Forged Threaded Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
