Sachiya Steel International is one of the pioneer dealer and whole seller of quality Nickel 201 Buttweld Fittings, which effectively resists water containing hydrogen sulphide or carbon dioxide. The resistance of Nickel 201 Elbow Butt Weld Pipe Fittings to corrosion by distilled and natural waters is excellent.

In distilled water, the corrosion rate of Nickel 201 Tee Butt Weld Pipe Fittings has been found to be less. Corrosion rates of Nickel 201 Cross Butt Weld Pipe Fittings in domestic hot water up to 200 Degree F (95 Degree C) are normally less and only occasionally high. In distilled water saturated with 50 / 50 carbon dioxide and air at 160 Degree F (71 Degree C), the corrosion rate of Nickel 201 Reducer Butt Weld Pipe Fittings is less.

Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings| Nickel 201 Buttweld Fittings | Nickel 201 Buttweld Fittings|

Nickel 201 Bend Butt Weld Pipe Fittings is used for oil well strainers where corrosion by hydrogen sulphide and brine must be combatted. Nickel 201 Stub End gives excellent service in flowing sea water even at high velocity, but in stagnant or very low – velocity sea water severe local attack may occur under fouling organisms or other deposits. In steam – hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates of Nickel 201 End Pipe Cap will be initially high but will decrease with time if conditions favour the formation of a protective film.

Nickel 201 Pipe Fittings Specifications

Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated