Sachiya Steel International is a well-known firm that manufactures and supplies a wide range of Stainless Steel 321 Nipple, which cannot be hardened by thermal treatment. Stainless Steel 321 Nipple is stabilized against chromium carbide formation by the addition of titanium. However, welded Stainless Steel 321H Nipple must never be used in highly oxidizing environments as it is liable to ‘Knife-line’ attack.
Characterized by high corrosion resistance in general atmospheric corrosive environments, SS 321 Hexagon Reducing Nipple exhibits excellent resistance to most oxidizing agents. This heat resistant grade of SS 321H Hexagon Nipple has a maximum dry air service temperature of 850 º C. Like other austenitic stainless steels, Alloy 321 One End Threaded Nipple works harden quickly and may require annealing after severe forming.
Stainless Steel 321 Nipple | Stainless Steel 321 Nipple | Stainless Steel 321 Nipple | Stainless Steel 321 Nipple | Stainless Steel 321 Nipple | Stainless Steel 321 Nipple
Alloy 321H Both End Threaded Nipple is stabilized against weld heat affected zone (HAZ) inter-granular corrosion. The titanium in this 321 Stainless Steel Nipple forms insoluble and stable carbide, which ties up all the carbon in the alloy and therefore prevents it from precipitating as chromium carbides. Our 321H Stainless Steel Nipple is readily welded by most standard processes and is very ductile and forms easily.
This Grade 321 Concentric Swaged Nipple must be water quenched or fully annealed after working to re-attain maximum corrosion resistance. The following are some of the major applications of our Grade 321H Eccentric Swaged Nipple, such as aircraft exhaust stacks and manifolds.
Stainless Steel 321/321H Nipple |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/4″ to 4″ |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
SS 321/321H Nipple Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 5(C+N) – 0.70 max |
| SS 321H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 4(C+N) – 0.70 max |
Stainless Steel 321/321H Nipple Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 321/321H Stainless Steel Nipple
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
| SS 321H | 1.4878 | S32109 | SUS 321H | X12CrNiTi18-9 |
Stainless Steel 321/321H Nipple Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
| For More Details Visit Our Website |
| https://sachiyasteel.com/ |
| Email Us: [email protected] |
| Contact Us: +919769056007 |
Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy X Threaded Forged Fittings in a wide range, which has some excellent features to offer such as high tensile strength, fine finish standards, abrasion resistant, and more.
Although Hastelloy X Forged Threaded Elbow Fittings (UNS N06002) is primarily noted for heat and oxidation resistance, it also has good resistance to chloride stress – corrosion cracking and has good resistance to carburization, excellent resistance to reducing or carburizing atmospheres.Oxidation resistance of Hastelloy X Forged Threaded Tee Fittings is excellent up to 2200 Degree F. Hastelloy X Forged Threaded Cross Fittings has excellent forming and welding characteristics.
Hastelloy X Forged Threaded Cap Fittings also has performed well in jet engine tailpipes, afterburner components, cabin heaters, and other aircraft parts.
Meanwhile, these Hastelloy X Forged Threaded Bend Fittings are also being offered in customized sizes and shapes to our customers.
Typical operating temperatures of Hastelloy X Forged Threaded Coupling Fittings are 500 Degree F to -20 Degree F.Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged Fittings | Hastelloy X Threaded Forged FittingsHastelloy X Forged Threaded Union Fittings can be bent up to 180 degrees with a maximum allowable thinning of 10 % and flattening of 8 % depending on tube OD and wall thickness and will maintain their physical properties.
Hastelloy X Forged Threaded Plug Fittings can be ultrasonically tested in immersion and / or Mag Particle tested to ensure integrity after drilling.
Sachiya Steel International offers a wide range of Inconel 601 Angle And Inconel Other Products, which resists oxidation and spalling at temperatures as high as 1260 Degree C. Our Inconel 601 Angle is a nickel – chromium alloy that is highly resistant to oxidation in the course of 2200 Degree F. This Inconel 601 C-Channel is used for chemical and process industries in catalyst grid supports in equipment for nitric acid production, Condenser tubes in sour – water, Insulating cans in ammonia reformers, Combustor components, Strippers, Process heaters and so on.Our Inconel 601 H-Beam is widely used in aerospace, thermal processing, power production, chemical treatment and land base gas turbine engines.
The welding method and filler metals used in this Inconel 601 I-Beam will be dependent upon the service conditions to which the final fabricated part will be subjected.
Our Inconel 601 T-Beam is also used for jet – engine igniters and for combustion – can liners, diffuser assembles, and containment rings in gas turbines for aircraft, vehicular and industrial applications.This Inconel 601 Chain has outstanding thermal and electrical properties as well as its ease of use.
Our Alloy 601 Angle as well has outstanding oxidation resistance to 2200 Degree F, and is forged at 1038 Degree C to 1233 Degree C (1900 Degree F to 2250 Degree F).
These Nickel – chromium – iron Alloy 601 C-Channel is a general purpose engineering material for applications that require resistance to heat and corrosion.
Inconel 601 Angle, Channel, Beam, Chain SpecificationsSpecifications:ASTM B166 / ASME B166Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISIInconel 601 Angle:5mm to 9mmInconel 601 Channel:40mm*20mm~300mm*300mmInconel 601 Beam:3″ thru 12.31″Inconel 601 Chain:1/8 inch – 1/2 inch DiameterThickness:3.0mm – 120mmLength:3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut SizesType:Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain 601 Inconel Angle, Channel, Beam, Chain Chemical CompositionGradeCMnSiCrSFeMoNiCuInconel 6010.10 max1 max0.50 max21.0–25.00.15 maxbalance 58.0-63.00.50 maxInconel 601 Angle, Channel, Beam, Chain Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.41 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530%Equivalent Grades for 601 Inconel Angle, Channel, Beam, ChainSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23Fe Inconel 601 Angle, Channel, Beam, Chain Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProceInconelingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryFor more details:E-Mail: [email protected]: https://steeltube.co.in/Phone: +91 9769056007
Sachiya Steel International offers a wide range of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.
These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.
Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.
Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.
Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.
These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F.Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.
Sachiya Steel International offers a wide range of Inconel 600 Wire, which are normally preferred for handling concentrated and high temperature caustic.
Its high nickel content, a minimum of Ni 72 %, combined with its chromium content, provides users of Inconel 600 Wire a number of benefits.
In strong oxidizing solutions like hot, concentrated nitric acid, Inconel 600 Coil Wires has poor resistance.
The high chromium content of Inconel 600 Wire raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.Inconel 600 Wire can both hot formed and cold form using typical processes, and is also often used in vegetable and fatty acid vessels.
Inconel 600 Wires is also used for furnace components, in food and chemical processing, nuclear engineering, and sparking electrodes.
Chromium content in Alloy 600 Coiled Wire confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.The high nickel content in Alloy 600 Coil Wire enables it to retain considerable resistance under reducing conditions.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Stainless Steel 347 Threaded Forged Fittings, which covers a wide range of alloys with different properties.
One property common to Stainless Steel 347 Forged Threaded Elbow is that they contain at least 12 % chromium.
Importance of alloying elements Stainless Steel 347 Forged Threaded Tee contains at least 18 % chromium and 8 % nickel – thus the well-known designation 18 / 8 steel.
In alloys with 12 % – 13 % chromium, the passive layer is strong enough to prevent Stainless Steel 347 Forged Threaded Cross from corroding in normal or mildly aggressive media.The main effect of the alloying element nickel is on the structure of Stainless Steel 347 Forged Threaded Cap and its mechanical properties.
The structure of Stainless Steel 347 Forged Threaded Fittings is austenitic with an adequate content of nickel, where corrosion resistance generally increases with the increasing content of chromium.Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged Fittings | Stainless Steel 347 Threaded Forged FittingsIn contrast to the pure chromium steels (ferritic stainless steel), Stainless Steel 347 Forged Threaded Coupling results in significant changes in the mechanical properties, such as increased workability and ductility, better resistance to thermal stress, and improved weldability.
The austenitic structure of Stainless Steel 347 Forged Threaded Union also results in a change in the physical properties of the steel.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
