Sachiya Steel International offers a wide quality range of Incoloy 800 Angle , which will stave off erosion in a number of aqueous atmospheres. Incoloy 800 Angle is often used in Heat exchangers, Pressure vessels, super – heater and re – heaters in power plants. The nickel content maintains a ductile and austenitic structure; as a result, our Incoloy 800H Angle is readily formed, machined and welded.
The high percentage of nickel maintains an austenitic structure so that Incoloy 800HT Angle is ductile, which can be welded by common welding techniques by using a matching filler metal. Our Incoloy 800 C-Channel is a nickel – iron – chromium alloy with the supreme resistance to corrosion, which is also used in extruded tubing for ethylene and steam methane reforming furnaces.
Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle | Incoloy 800 Angle
Incoloy 800HT H-Beam remains available, subject to commercial considerations, and certain specifications which restrict the service temperature of Incoloy 800H H-Beam. Our Incoloy 800HT I-Beam is nickel – iron – chromium alloy having the same basic composition as 800 but with significantly higher creep – rupture strength.
This Nickel-Iron-Chromium Alloy 800 H-Beam has good strength and excellent resistance to oxidation and carburization in high temperature atmospheres. Our Alloy 800H I-Beam maintains a stable and austenitic structure during prolonged exposure to high temperatures. Alloy 800 Chain also remains stable in long term high temperature service. The high temperature resistance of our Alloy 800HT T-Beam is comparable to Alloy 800 T-Beam.
Incoloy 800/800H/800HT Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B408 / ASME B408 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Incoloy 800 Angle |
: | 5mm to 9mm |
| Incoloy 800 Channel |
: | 40mm*20mm~300mm*300mm |
| Incoloy 800 Beam | : | 3″ thru 12.31″ |
| Incoloy 800 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
800/800H/800HT Incoloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe |
| Incoloy 800 | 0.10 max | 1.50 max | 1 max | 0.15 – 0.60 | 0.015 max | 19.0-23.0 | 0.75 max | 30.0-35.0 | 39.5 min |
| Incoloy 800H | 0.05 – 0.10 | 1.50 max | 1 max | 0.15 – 0.60 | 0.015 max | 19.0-23.0 | 0.75 max | 30.0-35.0 | 39.5 min |
| Incoloy 800HT | 0.06 – 0.10 | 1.50 max | 1 max | 0.15 – 0.60 | 0.015 max | 19.0-23.0 | 0.75 max | 30.0-35.0 | 39.5 min |
Incoloy 800/800H/800HT Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1385 °C (2525 °F) | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for 800/800H/800HT Incoloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 |
| For More Details Visit Our Website |
| https://steeltube.co.in/ |
| Email Us: [email protected] |
| Contact Us: +919769056007 |
Sachiya Steel International is one of the well-established Manufacture and Exporter of high quality Stainless Steel 317 Wire Mesh, which is used to avoid corrosion problems caused by welding.
SS 317 Hexagonal Wire Mesh exhibits great resistance to chloride pitting and crevice corrosion because of high molybdenum content and nitrogen additions, and the higher nickel content ensures better resistance to stress – corrosion cracking versus the 300 series.
The higher alloy content of super austenitic SS 317 Welding Wire Mesh makes them more expensive.Stainless Steel 317 Netting Wire Mesh is used in pressure vessels but is a low – alloy carbon steel with a chromium content of 0.5 % to 9 %.
Stainless Steel 317 Woven Wire Mesh is preferred where biocompatibility is required (such as body implants and piercings).
Stainless Steel 317 Spring Steel Wire Mesh reduces the sensitization effect (precipitation of chromium carbides at grain boundaries) caused by the high temperatures involved in welding.SS 317 Fencing Wire Mesh generally has better engineering properties than austenitic grades, but has reduced corrosion resistance, because of the lower chromium and nickel content.
317 Stainless Steel Wire Mesh are also usually less expensive, which can offer similar performance at lower cost and are preferred in certain applications.
Sachiya Steel International is a Leading Manufacturer And Exporter Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design.
These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media.
In excess of most other metals of parallel chemistry, our Hastelloy B2 Compression Fittings offers higher protection in opposition to commanding chemical corrosion and comes by means of one of the finest high – temperature potencies of any steel.
These Hastelloy B2 Male Connector Fittings can be machined by using all the customary machining procedures.Our Hastelloy B2 Ferrule Fittings (UNS N10665) must not be used at temperatures in the range of 1000 Degree F and 1600 Degree F as the alloy forms secondary stages that may perhaps lessen the ductility of the product.
Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
Our Alloy B2 Male Connector Tube Fittings is seldom attacked to this degree in other media, where in fact only one – third of the coupon thickness in the heat – affected zone survived the corrosion test.Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male FittingsExperiments in these Alloy B2 Tube Fittings were performed in increments of solution temperature of 5 degree C for a 24 – hour exposure period to determine the critical pitting temperature, i.e.
