Sachiya Steel International is one of the well-known traders and stockiest of Alloy Steel Grade 12 Plate, Coils, which offers some remarkable features to our clients such as the product is Leak proof, Heat resistance, Light weight and so on. Our Alloy Steel Grade 12 Plates have a number of dedicated buyers across the country and globally mainly due to the high levels of international industrial standards adhered to by us.
Alloy Steel Grade 12 Coils is designed in conformation with industrial standards, which can be availed in different sizes, length and specifications. We are a prestigious company engaged in offering a superior quality Alloy Steel Grade 12 Slating Coils, which are manufactured by our experts using quality approved material with the help of modern technology in accordance with set standards of industry.
Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate | Alloy Steel Grade 12 Plate
Sachiya Steel International is engaged in offering an exclusive range of Alloy Steel Grade 12 Perforated Coils which are manufactured from quality raw material. A good finned Alloy Steel Gr. 12 Plates can be made by the strict conditions such as copper density, grain size and hardness. Pressure vessel grade alloy such as these Alloy Steel Gr. 12 Coils is meant for its usage in elevated temperature service, which is further used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures.
Alloy Steel Gr 12 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM A387 / ASME SA387 |
| Thickness | : | 1mm-300mm |
| Width |
: | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, 4050mm etc |
| Length | : | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, 12000mm, 15000mm etc |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc. |
Alloy Steel Gr 12 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| Alloy Steel Gr 12 | 0.05 – 0.17 | 0.40-0.65 | 0.15 – 0.40 | 0.035 max | 0.035 max | 0.80 – 1.15 | 0.45 – 0.60 | – | – |
Alloy Steel Gr 12 Sheets, Plates & Coils Tensile Requirements
| Tensile (MPa) | Yield (MPa) | Elongation (50mm) | Elongation (200mm) | Reduction of Area |
| 380 – 550 | 230 min | 22% min | 18% min | – |
Alloy Steel Gr 12 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Alloy Steel Gr 12 Sheets, Plate & Coils Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Sachiya Steel International holds expertise in offering wide array of SMO 254 Threaded Forged Fittings that are acclaimed for sturdy construction and are performance oriented.
Coupled with Nickel and Copper this gives SMO 254 Forged Threaded Elbow (UNS S31254) a good resistance to pitting and crevice corrosion, especially in environments containing halide ions, e.g.
These SMO 254 Forged Threaded Tee is a very high end austenitic stainless steel that combines impact toughness resistance to chloride stress corrosion cracking, pitting and crevice corrosion with strength nearly twice that of 300 series stainless steels.SMO 254 Forged Threaded Cross is often used in Process equipment in chemical industry, Bleaching equipment in the pulp and paper industry, and more.
SMO 254 Forged Threaded Coupling stains less easily than other iron – based metals, but it’s not literally stainless.SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged Fittings | SMO 254 Threaded Forged FittingsThese SMO 254 Forged Threaded Fittings is not very electrically or thermally conductive and is non – magnetic.
SMO 254 Forged Threaded Union has a higher corrosion resistance than regular steel and is widely used because of the ease in which it is formed into various shapes.
There are various shapes and surface finishes to suit the environment of these SMO 254 Forged Threaded Plug that must endure.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment.
Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector.
Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.Titanium Gr 2 Tube to Female Pipes SpecificationsSpecifications:ASTM B381 ASME SB 381Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is one of the well-known Manufacture and Exporter of high quality Stainless Steel 310H Angle, which is ferritic, straight chromium, non – harden able grade, combining good corrosion resistance and formability characteristics with useful mechanical properties.
The ability of Stainless Steel 310H Angle to resist nitric acid attack permits its use in specific chemical applications but automotive trim, indoor panelling such as refrigeration cabinets and appliance components are its largest fields of application.
Stainless Steel 310H C-Channel has a quite bright, reflective appearance.Stainless Steel 310H H-Beam is the free – machining version of this grade, produced in bar form for high speed machining in automatic screw machines.
Stainless Steel 310H I-Beam has good resistance to a wide variety of corrosive media including nitric acid and some organic acids.
It attains its maximum corrosion resistance when in the highly polished or buffed condition.
The resistance to pitting and crevice corrosion resistance in Stainless Steel 310H T-Beam is a little lower than that of Grade 304.Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H Angle | Stainless Steel 310H AngleThe lower work hardening rate makes bending and forming somewhat easier for Stainless Steel 310H Chain, but the lower ductility restricts very severe operations.
Sachiya Steel International is a leading manufacturer and exporter of Copper Threaded Forged Fittings, which are available in different sizes for our clients.
We have manufactured Copper Threaded Forged Elbow Fittings using superior quality raw material and ultra – modern technology.
The chemical composition of cooling gas in Copper Threaded Forged Tee Fittings is chloro fluorocarbon which is very harmful to environment as it contributes global warming.
Copper Threaded Forged Cross Fittings are often used for Power Generation & Atomic Energy, Food Processing & Water Coolers, Chemicals & Oil Refineries, and Furniture Process & Cold Storage.Copper Threaded Forged Cap Fittings is the general – purpose product for above ground services, which is ideal for Drinking Water and Central Heating.
Copper Threaded Forged Coupling Fittings are also used for Copper Pipes, Air Conditioner Parts, Copper Fittings, Gas Stove & Electric Rickshaw, Water Cooled Chiller, Air Cooled Chiller, Air Handling Unit, Air Washers, Ventilation Unit, Package Unit, etc.
We manufacture Copper Threaded Forged Bend Fittings in accordance to international industry standards and assure our clients for the superior quality of these fittings.Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged Fittings | Copper Threaded Forged FittingsOur company is the known in the industry for trading and supplying a wide spectrum of Copper Threaded Forged Union Fittings, which include the various features such as cost efficiency, timely execution, high performance, etc.
Sachiya Steel International is a known distributor and supplier of Carbon Steel A350 Socket Weld Fittings, where a common engineering design criterion is that its corrosion rate should not exceed.
ASTM A350 Carbon Steel Forged Socket Weld Elbow Fittings is similar to the parent metal, but contains 2 % to 2.5 % extra nickel to ensure that the weld metal retains a 50 / 50 phase balance.
This is reflected in the design stresses for ASME SA 105 Carbon Steel Forged Socket Weld Tee Fittings that it is the widely used code for piping.
Like all high alloy materials, ASTM A350 Carbon Steel Forged Socket Weld Cap Fitting requires care in welding.It should only be fabricated by qualified welders working to approved procedures.
ASME SA 105 Carbon Steel Forged Socket Weld Coupling Fittings is recommended that qualification should be excellent but should include a corrosion test in addition to the usual mechanical and NDE requirements.
The curves show that ASTM A350 Carbon Steel Forged Socket Weld Cross Fittings offers superior performance in both dilute and concentrated acids.
The global air pollution control systems market size is expected to be valued at USD 98.17 billion by 2025, per a new report by Radiant Insights, Inc., registering a 5.0% CAGR during the forecast period.
Adverse effects include damage to human health, flora and fauna, and the environment at large.
The eco system is vulnerable to pollution from natural sources and human activities.
Combustion processes are among the largest originators of air contaminants, and industries that need combustion at the core of their processes are said to be major contributors to air pollution.
Further key findings from the report suggest: • The U.S. air pollution control systems market is predicted to exhibit a CAGR of 3.9% over the forecast period.
Beneficial government regulations, coupled with economic and financial benefits offered for controlling the pollution, are expected to encourage industry growth in the regional market • The U.K. market was valued at USD 3.6 billion in 2017.
