Sachiya Steel International offers superior quality of Titanium Grade 2 Socket Weld Fittings, where our engineers hire cutting – edge technology in the manufacture procedure to make these products. As a single – stage material, features of Titanium Grade 2 Forged Socket Weld Elbow Fittings are measured by chemistry (interstitial contamination and iron elements) and grain size.
Linked to the other grades of commercially untainted titanium, Titanium Grade 2 Forged Socket Weld Tee Fittings is feebler than Grade 3 to some extent, but sturdier than Grade 1 and similarly resistant to corrosion. Titanium Grade 2 Forged Socket Weld Cap Fittings is generally used in Marine and Chemical applications, Aerospace industry, Medical industry, Electroplating industry, etc. Meanwhile, Titanium Grade 2 Forged Socket Weld Coupling Fitting are also being offered in different sizes and shapes to our customers.
The parts of Titanium Grade 2 Forged Socket Weld Union Fittings have good strength – to – weight ratio, corrosion resistance and ductility. Parts built with Titanium Grade 2 Forged Socket Weld Plug Fitting can be machined, shot – peened and polished in as – built and heat treated states. These Titanium Grade 2 Forged Socket Weld Cross Fittings is widely used in heat exchangers; where despite the low thermal conductivity of titanium the efficiency of heat transfer is high due to good strength, high resistance to erosion corrosion and the fouling resistance of the hard, smooth surface.
Titanium Grade 2 Forged Socket weld Fittings Specifications |
||
| Specifications | : | ASTM B381 & ASME B381 |
| Size | : | 1/8” NB to 4” NB |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Titanium Gr.2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Titanium Gr.2 | 3.7035 | R50400 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of Cupro Nickel 70 Pipe Fittings, where we inspect these products on predefined quality limits to ensure their error free design.
Our Cu-Ni 70 / 30 Compression Pipe Fittings are generally used in Flexible Metal Hose, Welding Backing Rings, Weld Wire, Condensers, Boiler Parts, Propeller Sleeves, Heat Exchanger Parts, and so on.
These Cupro Nickel 70 / 30 Ferrule Pipe Fittings have good toughness and strength, readily fabricated and weldable, resistance to bio – fouling, etc.
Our Cupro Nickel 70 / 30 Double Ferrule Pipe Fittings (UNS C71500) is used in areas where soaring pressures and temperatures, merged by means of high turbulence and velocities are severe problems.Meanwhile, these Cu-Ni 70 / 30 Accessories are as well being offered in different sizes, designs and shapes to our well – regarded customers.
Temperatures between 1700 Deg F and 1900 Deg F are appropriate for our Cu-Ni 70 / 30 Compression Fittings.
Another common use of these Cu-Ni 70 / 30 Ferrule Fittings is in silver – coloured modern – circulated coins.Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe Fittings | Cupro Nickel 70 Pipe FittingsWith the assistance of our gifted specialists, we are skilled to offer a predominant scope of our Cu-Ni 70 / 30 Double Ferrule Fittings which is recognized for extraordinary quality and solid nature.
Sachiya Steel International is a leading manufacturer and exporter of Stainless Steel 321 Tube to Male Fittings, which is available at best price.
Stainless Steel 321 Tube Fittings has increased resistance to scaling and intergranular corrosion (versus 304 / 316 material) due mainly to its added titanium content.
Titanium addition in Stainless Steel 321H Tube Fittings eliminates the formation of chromium carbides at the grain boundaries by tying up the carbon and nitrogen as titanium carbides or nitrides.
While processing only stainless tools like steel brushes in Stainless Steel 321 Compression Tube Fittings, pneumatic picks and so on are allowed, in order to not endanger the passivation.Stainless Steel 321H Compression Tube Fittings is similar to stainless steel 304, but with higher nickel content and stabilized with titanium.
Welding should be carried out using Stainless Steel 321 Male Connector Fittings or similar electrodes or rods (depending upon application), where no pre heat or post heat is generally required.Stainless Steel 321H Male Connector Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60 °C.
Stainless Steel 321H Ferrule Fittings can be used in up to 10 % diluted solutions at elevated temperatures.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Angle And Other Titanium Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications.
Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable.
Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers.Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels.
The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation.
The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum.Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium.
The corrosion resistance of Grade 2 Titanium Chain is based on the presence of a stable, continuous, tightly adherent oxide layer.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 904L Threaded Forged Fittings, which have excellent resistance to warm seawater and chloride attack.
The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications.
The mechanical properties for the different tempers of Stainless Steel 904L Forged Threaded Tee are obtained by cold working and not by heat treating.Stainless Steel 904L Forged Threaded Cross has a minimum tensile strength and is used in the fabrication of parts that require moderate drawing or forming.
Stainless Steel 904L Forged Threaded Cap is a non – stabilized austenitic stainless steel with low carbon content.
This high alloy Stainless Steel 904L Forged Threaded Fittings/ is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged FittingsStainless Steel 904L Forged Threaded Coupling is also resistant to stress corrosion cracking and crevice corrosion.
Stainless Steel 904L Forged Threaded Union is non – magnetic, and offers excellent formability, toughness and weldability.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
