Sachiya Steel International provides a vast collection of Titanium Grade 5 Socket Weld Fittings, where we provide these products to our valuable clienteles in different specifications at industry – leading prices. Titanium Grade 5 Forged Socket Weld Elbow Fitting has outstanding resistance to corrosion in seawater making it an exceptional select for use in subsea oil & gas and offshore processes where seawater weight and corrosion are concerns. Titanium Grade 5 Forged Socket Weld Tee Fittings is age hardenable by heat action to attain even greater powers.
Titanium Grade 5 Forged Socket Weld Cap Fitting is used in medical, aerospace, and other uses where reasonable strength, good potency to weight, and promising corrosion features are essential. Titanium Grade 5 Forged Socket Weld Cross Fittings also has some best features to offer such as precise dimensions, easy to fit, rust proof and more. Meanwhile, Titanium Grade 5 Forged Socket Weld Coupling Fitting are also being offered in different sizes and shapes to our customers.
Titanium Grade 5 Forged Socket Weld Union Fittings is the common name for a number of different alloys used in corrosive environments. Titanium Grade 5 Forged Socket Weld Plug Fitting is used to keep food surfaces and medical devices safe of microbes as it is self-repairing with its chromium oxide film. Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical issue related to Titanium Grade 5 Forged Socket Weld Lateral Tee Fittings.
|
Titanium Grade 5 Forged Socket weld Fittings Specifications
|
||
| Specifications | : | ASTM B381 & ASME B381 |
| Size | : | 1/8” NB to 4” NB |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Titanium Gr.5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Titanium Gr.5 | 3.7165 | R56400 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 904L Tube to Union Fittings, where it is inserted in to nitric acid but attacked by concentrated sulphuric acid and hydrochloric acid.
Stainless Steel 904L Tube Fittings is a super austenitic stainless steel that is well known for its outstanding resistance to pitting, crevice corrosion, stress cracking, and fatigue corrosion.
Stainless Steel 904L Compression Fittings is a corrosion resistant alpha titanium alloy with similar mechanical properties to the commercially pure grades.This makes Stainless Steel 904L Union Fittings ideal for applications that require lightness of weight and excellent strength such as oil & gas (down-hole), military and sporting goods.
In most aqueous environments, Stainless Steel 904L Union Tube Fittings demonstrate an excellent corrosion resistance due to the protective oxide films spontaneously formed and remain stable on the surface.
When the surface of 904L Stainless Steel Tube Fittings is exposed to oxygen or moisture, a new corrosion resistant layer of titanium oxide is created.Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings | Stainless Steel 904L Tube to Union Fittings904L Stainless Steel Compression Fittings are also unique among metals in the chemical processing industry for handling chlorine (wet) and chlorine compounds in aqueous solutions.
904L Stainless Steel Union Fittings is fully resistant to solutions of chlorides, hypo – chlorites, chlorates, perchlorates and chlorine dioxide.
Sachiya Steel International is one of the leading manufacturer and exporter of Nickel Alloy 200 Threaded Forged Fittings.
Typically, the elemental restrictions of both, Nickel 200 Forged Threaded Elbow (UNS N02200) and Nickel 201 Forged Fittings (UNS N02201) are combined into one and dual – certified chemistry resulting in a single alloy with the desired characteristics of both alloys.
Other useful features of Nickel 200 Forged Threaded Tee are its magnetic and magneto strictive properties, high thermal and electrical conductivities, low gas content and low vapor pressure.Nickel 200 Forged Threaded Cross are often used in Synthetic Fiber Production, Processes where Sodium Hydroxide is used, Food Processing, and more.
Meanwhile, these Nickel 200 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Nickel 200 Forged Threaded Fittings has outstanding resistance to caustic alkalis up to and including the molten state.
In acid, alkaline and neutral salt solutions, Nickel 200 Forged Threaded Coupling shows good resistance, but in oxidizing salt solutions severe attack will occur.Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged Fittings | Nickel Alloy 200 Threaded Forged FittingsNickel 200 Forged Threaded Union is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C. Nickel 200 Forged Threaded Bushing is used for a variety of household and industrial applications such as screws, machinery parts, car headers, and food – handling equipment.Nickel 200 Threaded Fittings SpecificationsSpecifications:ASTM B564 & ASME B564Size:1/8” NB to 4” NB (Socket weld & Screwed-Threaded)Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 2000 LBS, 9000 LBSType:Threaded FittingsNickel 200 Forged Threaded Fittings Chemical CompositionGradeCMnSiSCuFeNi2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 minNickel 200 Threaded Fitting Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 %Equivalent Grades for 200 Nickel Forged Threaded FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Nickel 200 Forged Threaded Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International Manufacture and Exporter Incoloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool.
The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion.
Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wires offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service.Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment.
Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments.
Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc.
Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more.
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter of Incoloy Alloy 20 Tube to Male Fittings, where our complete product array ensures flawless finishing and is performance oriented.
Alloy 20 Tube Fittings resists chloride ion and pitting corrosion and its content of copper keeps it away from sulfuric acid.
Alloy 20 Compression Fittings has outstanding resistance to general corrosion, crevice corrosion and pitting in chemicals comprising sulfuric and chlorides, nitric and phosphoric acids.Alloy 20 Male Connector Fittings mainly shines in resisting corrosion to hot sulfuric acids when related to conventional alloys like SS 316.
Alloy 20 Ferrule Tube Fittings (UNS N08020) is alleviated by means of Columbium to minimalize carbide precipitation throughout welding.
Meanwhile, Alloy 20 Double Ferrule Tube Fittings is also being offered in different sizes and shapes to our customers, where we also offer the same at superlative rates.
This specification of Carpenter 20 Male Connector Fittings covers nominal wall and minimum wall seamless ferrite intended for high temperature service.Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male Fittings | Alloy 20 Tube to Male FittingsFor applications requiring maximum ductility, Carpenter 20 Compression Tube Fittings with low sulfur levels can be supplied by producers using ladle – refining techniques.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 446 Tube to Female Pipes, which is the strongest of the alloys, useful for continuous service to 1800 Degree F. Deposits of these Stainless Steel 446 Tube Fittings have outstanding resistance to wear, erosion, creep, thermal fatigue and oxidation.
Because of its long and widespread use, Stainless Steel 446 Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material.
When exposed for prolonged periods at intermediate temperatures, these Stainless Steel 446 Female Connector Fittings exhibits a loss of room temperature ductility in much the same fashion as other super – alloys.Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female Pipes | Stainless Steel 446 Tube to Female PipesStainless Steel 446 Ferrule Tube Fittings is welded using gas tungsten arc, gas metal arc, shielded metal arc, electron beam and resistance welding, where submerged arc welding is not recommended.
These Stainless Steel 446 Double Ferrule Tube Fittings is used good for joint fit-up, minimum restraint, low inter – pass temperature and cool rapidly from welding.
For maximum ductility, fabricated components of 446 Stainless Steel Female Connector Fittings should be annealed 2150 Degree F – 2250 Degree F, and then rapid cool.
The principal application of these 446 Stainless Steel Ferrule Tube Fittings is for hard – facing turbine blade interlock surfaces, which are further available in straight cut lengths or layer wound spools.Stainless Steel 446 Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 446 Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN446min.–––––23.0––0.10max.0.21.50.750.0400.03030.0–0.500.25 Stainless Steel 446 Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201 Stainless Steel 446 Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C44677502009.911.411.624.928.7460570 Equivalent Grades for 446 Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName446S44600––1.4762 / 1.4763––– SS 446 Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
The global air pollution control systems market size is expected to be valued at USD 98.17 billion by 2025, per a new report by Radiant Insights, Inc., registering a 5.0% CAGR during the forecast period.
Adverse effects include damage to human health, flora and fauna, and the environment at large.
The eco system is vulnerable to pollution from natural sources and human activities.
Combustion processes are among the largest originators of air contaminants, and industries that need combustion at the core of their processes are said to be major contributors to air pollution.
Further key findings from the report suggest: • The U.S. air pollution control systems market is predicted to exhibit a CAGR of 3.9% over the forecast period.
Beneficial government regulations, coupled with economic and financial benefits offered for controlling the pollution, are expected to encourage industry growth in the regional market • The U.K. market was valued at USD 3.6 billion in 2017.
