Sachiya Steel International is one of the pioneer distributor and dealer of quality Nickel Alloy 201 Forged Socket Weld Fittings, which is a silvery – white metal with a slight golden tinge that takes a high polish. Nickel 201 Forged Socket Weld Elbow is slowly oxidized by air at room temperature and is considered corrosion – resistant. Historically, Nickel 201 Forged Socket Weld Tee has been used for plating iron and brass, coating chemistry equipment, and manufacturing certain alloys that retain a high silvery polish, such as German silver.
About 6 % of world production of Nickel 201 Forged Socket Weld Cap is still used for corrosion – resistant pure – nickel plating, where these nickel – plated objects sometimes provoke nickel allergy. Nickel 201 Forged Socket Weld Coupling has been widely used in coins, though its rising price has led to some replacement with cheaper metals in recent years.
Nickel 201 Forged Socket Weld Cross is one of four elements (iron, cobalt, nickel, and gadolinium) that are ferromagnetic at approximately room temperature. Alnico permanent magnets based partly on Nickel 201 Forged Socket Weld Tee are of intermediate strength between iron-based permanent magnets and rare – earth magnets. Nickel 201 Forged Socket Weld Union is valuable in modern times chiefly in alloys, where about maximum percentage of world production is used in nickel – steels (particularly stainless steel).
Nickel 201 Forged Socket weld Fittings Specifications |
||
| Specifications | : | ASTM B564 & ASME B564 |
| Size | : | 1/8” NB to 4” NB |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Socket weld Fittings |
| Grade | C | Mn | Si | P | S | Cu | Mo | Ni | Fe |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | – | 0.01 max | 0.25 max | – | 99.00 min | 0.40 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Pipe Fittings, which is subject to stress corrosion cracking in hot, a concentrated caustic alkali.
When stainless steel compounds are present as well, or for ammonium hydroxide service, these Stainless Steel 446 Compression Pipe Fittings is suggested.
To avoid stress corrosion cracking, our Stainless Steel 446 Ferrule Pipe Fittings fabrication should be fully stress relieved prior to use.A minimum treatment of 1650 Degree F for 1 hour is suggested in our SS 446 Double Ferrule Pipe Fittings, but 1800 Degree F – 1850 Degree F for 1 hour preferred.
This Stainless Steel 446 Accessories is a high strength nickel base super – alloy used for cryogenic temperatures up to long term service at 1200 Degree F. Our 446 Stainless Steel Compression Pipe Fittings is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe Fittings | Stainless Steel 446 Pipe FittingsThese 446 Stainless Steel Ferrule Pipe Fittings will show a contraction after precipitation hardening, where annealing is done at 1700 Degree F – 1850 Degree F, and then air cool or faster.
Our 446 Stainless Steel Double Ferrule Pipe Fittings is a low carbon, high purity, nitrogen-bearing “super-austenitic” stainless alloy.
These 446 SS Accessories was designed to be a seawater resistant material and has since been demonstrated to be resistant to a broad range of very corrosive environments.Stainless Steel 446 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM A182 ASME SA 182Tube Size:1/16”OD to 2”OD, 2mm OD to 50mm ODThread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 446 Pipe Fittings Chemical CompositionGradeCMnSiPSCrMONiN446min.–––––23.0––0.10max.0.201.50.750.0400.03030.00.500.25Stainless Steel 446 Accessories Mechanical PropertiesGradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max4464852752092201Equivalent Grades for 446 Stainless Steel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600SUS 446––––SS 446 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients’ requirements.
The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix.
Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments.
The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favors the formation of the high hardness phase and also provide a high level of corrosion resistance.The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures.
Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements.
Higher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.Stainless Steel 446 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 446 Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25Balance Stainless Steel 446 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 % Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600––––– SS 446 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 446 Tube to Male Fittings, which is available in different specifications as per clients requirements.
The microstructure of Stainless Steel 446 Tube Fittings consists of about 50 % of the hard intermetallic Laves phase dispersed in a softer cobalt alloy matrix.
Stainless Steel 446 Compression Fittings provides the material with exceptional metal to metal wear bearing properties, where follow annealing by stabilization and aging treatments.The high levels of molybdenum and chromium present in Stainless Steel 446 Male Connector Fittings favors the formation of the high hardness phase and also provide a high level of corrosion resistance.
The phase of Stainless Steel 446 Ferrule Fittings itself has a 2840 Degree F melting point, which helps to retain its wear resistance to high temperatures.
Mechanical properties of Stainless Steel 446 Double Ferrule Fittings vary with the solution and aging treatments, where shapes are available per customer requirements.Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male Fittings | Stainless Steel 446 Tube to Male FittingsHigher solution temperatures of 446 Stainless Steel Male Connector Fittings result in better room temperature ductility and elevated temperature creep – rupture strength.
Lower solution temperatures in 446 Stainless Steel Tube Fittings give higher tensile strengths, where short time hot tensile strength is inferior at temperatures up to 1350 Degree F. The creep – rupture strength of 446 Stainless Steel Compression Fittings is superior to that of alloy 718 at temperatures above 1150 Degree F – 1200 Degree F.Stainless Steel 446 Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 446 Tube To Male Fittings Chemical CompositionGradeCMnSiPSCrMoNiNFeSS 4460.2 max1.5 max0.75 max0.04 max0.030 max23 – 30–0.50 max0.10 – 0.25BalanceStainless Steel 446 Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.5 g/cm31510 °C (2750 °F)Psi – 75,000 , MPa – 485Psi – 40,000 , MPa – 27520 %Equivalent Grades for 446 Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 4461.4762S44600––––– SS 446 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 329 Round Bar , which is an age hardening nickel base super – alloy with exceptional strength from room temperature through about 1600 Degree F. Limit currents and the size of the fusion zone, where rapid cooling in Stainless Steel 329 Square Bars from welding is necessary to minimize aging stresses.
After welding, the fabrication of Stainless Steel 329 Flat Bars should be solution treated, using rapid heating and cooling rates through the aging range.
GTAW using DC straight polarity in Stainless Steel 329 Threaded Bars requires good joint fit – up and cooling by means of copper backup bars or water – cooled fixtures.After welding, the assembly of Stainless Steel 329 Hollow Bars should be solution treated using rapid heating and cooling rates through the 1200 Degree F – 1600 Degree F range, followed by aging.
Stainless Steel 329 Hexagonal Bars can even be a substitute of Austenitic grade of marine surrounding, where we offer tailor made these with suitable wedge options.Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round BarStainless Steel 329 Triangular Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand.
High strength condition: Solution treatment of Stainless Steel 329 Bars is up to 60 Degree F – 100 Degree F below the beta (typically 1460 Degree F – 1480 Degree F), not less than 30 minutes, and then water quench.SS 329 Round Bar SpecificationsSpecifications:ASTM A276, ASME SA276 / ASTM A479 ASME SA479Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 329 Round Bars:Outside Diameter in the range of 4mm to 500mmSS 329 Bright Bars:Outside Diameter in the range of 4mm to 100mmSS 329 Hex Bars:18mm – 57mm (11/16″ to 2-3/4″)SS 329 Square Bars:18mm – 47mm (11/16″ to 1-3/4″)SS 329 Flat Bars:1/2” to 10” in thickness range of 2mm to 150mm,Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishLength:1 to 6 Meters, Custom Cut LengthsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.329 Stainless Steel Round Bar Chemical CompositionGradeCMnSiPSCrMoNiNSS 3290.08 max1 max0.75 max0.40 max0.30 min23.0-28.01.0-2.02.5-5.0–Stainless Steel 329 Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.285 lb/in3 –MPA-725MPA-55025 %Equivalent Grades for 329 Stainless Steel Round BarSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 3291.4460-S32900SUS 329329S31 – – –SS 329 Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website : Steel Pipe Factory
Sachiya Steel International is one of the Leading Manufacturer And Exporter high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
