Powder coating is the newest technique in creating finishes on surfaces without applying solvent to the object. It uses powders that are a mixture of thermoplastic or thermoset polymer or aluminum, medium density fiberboards, fusion-bonded epoxy and acrylics, powder ingredients, and pigmentation.
They are all heated in an extruder and then rolled flat and cooled. After it is cooled down, it is broken down into many pieces and milled to produce the powder. This type of finishing is more popularly used to create a hard finish for metals.
The powders are applied using an electronic gun. You can find multiple types of guns, like the corona charging gun that uses electronic power to charge the powder. The tribo charging gun uses friction to charge the powder. The bell charging gun flings the powder from the bell's perimeter to produce a charge on the powder.
Whichever type of electronic gun you use, the end result is the same. The powder then sticks & bonds to the surface of the object. It is heated to melt the powder, and it sticks to the surface of the object, giving it a relatively hard, tough, and abrasion-resistant skin. The final cured coating is similar to the effect of two-pack wet paint.
After applying the powder coating onto the object's surface, you would have to heat the object to melt the powder. The objects are usually placed on ovens to be heated. There are ovens where you can customize the production rate, the curing cycle and set the layout requirement.
You can also configure the oven to set as single-pass or multi-pass. The ovens have to comply with the National Electrical Codes standards with UL-approved control panels. Ovens that have customizable compartments that would allow you to add production capacity are also available.
Rustylions Powder coating specializes in powder coating & metal finishing for multiple types of businesses, from industrial manufacturing to metal fabrication to auto parts. Rustylions serve machine shops in finishing services. For your powder coating requirements - Contact Rustylions Powder coating at 1~347~613~8103/ 973~459-8515.
Powder coating is the newest technique in creating finishes on surfaces without applying solvent to the object.
It uses powders that are a mixture of thermoplastic or thermoset polymer or aluminum, medium density fiberboards, fusion-bonded epoxy and acrylics, powder ingredients, and pigmentation.They are all heated in an extruder and then rolled flat and cooled.
This type of finishing is more popularly used to create a hard finish for metals.The powders are applied using an electronic gun.
You can find multiple types of guns, like the corona charging gun that uses electronic power to charge the powder.
The tribo charging gun uses friction to charge the powder.
It is heated to melt the powder, and it sticks to the surface of the object, giving it a relatively hard, tough, and abrasion-resistant skin.
