Sachiya Steel International is one of the prominent distributor and supplier of high quality Stainless Steel 317 Buttweld Fittings, which has excellent general corrosion resistance and is superior in most environments. Stainless Steel 317 Elbow Butt Weld Pipe Fittings has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion, where the CPT is generally at least 35 Degree C.
Stainless Steel 317 Reducer is also resistant to chloride stress corrosion cracking (SCC) at temperatures of up to about 150 Degree C. Stainless Steel 317 Tee Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades. Stainless Steel 317 Cross Butt Weld Pipe Fittings has better resistance to sea water than grade 316.
Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings | Stainless Steel 317 Buttweld Fittings
Although stainless steel has good high temperature oxidation resistance, Stainless Steel 317 Bend Butt Weld Pipe Fittings suffer from embrittlement if held for even short times at temperatures above 270 Degree C. If embrittled, Stainless Steel 317 Stub End can only be rectified by a full solution annealing treatment. Because of its high strength, Stainless Steel 317 End Cap performs well in abrasion/corrosion conditions. A PRE guaranteed to be at least 40 indicates that Stainless Steel 317 Dish Cap Butt Weld Pipe Fittings has good pitting and crevice corrosion resistance to warm sea water and other high chloride environments.
Stainless Steel 317 Pipe Fittings Specifications |
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
SS 317 Pipe Fittings Chemical Composition
| Grade | C | Ni | Mn | P | S | Cr | Si | Mo | Fe |
| 317 | 0.08 max | 11.00 – 15.00 | 2 max | 0.045 max | 0.030 max | 18.00 – 20.00 | 1 max | 3.00 – 4.00 | 57.845 min |
Stainless Steel 317 Butt weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 317 Stainless Steel Pipe Fitting
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
SS WERKSTOFF NR.1.4449 Buttweld Pipe Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Shashwat Stainless Inc. is the largest Pipe and Tubes Manufacturers in India.
One of our popular products in the Metal Market is ASTM Pipes and Tubes.
Shashwat Stainless Inc offers a wide range of products in different materials to its customers.
We also deal with Round Bars and Pipes and Tubes, Duplex Steel & Super Duplex Steel, Buttweld Fittings, Forged Fittings, Stainless Steel and Flanges.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304H Buttweld Fittings, which is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures.
Stainless Steel 304H Elbow is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.
Stainless Steel 304H Tee Pipe Fittings is exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.Stainless Steel 304H Cross Pipe Fittings are useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions).
Stainless Steel 304H Reducer is also commonly used with formic acid though it will tend to discolor the solution, which further resist damage from aldehydes and amines.
Stainless Steel 304H Buttweld FittingsStainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings Fats and fatty acids only affect Stainless Steel 304H Stub End Pipe Fittings at temperatures above 150 Degree C (302 Degree F), and above is unaffected at all temperatures.
Stainless Steel 304H Pipe Bend is required for processing of urea, which is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.Stainless Steel 304H Pipe Fittings SpecificationsSpecifications:ASTM A403 / ASME SA403Size:1/8” NB TO 48” NB.
