Sachiya Steel International is a recognized dealer, trader and Stockist of EN8 Carbon Steel Plates, Sheets , Coils, which is a proven material for the production of boiler and pressure vessels of ASME. For applications requiring maximum ductility, these EN8 Carbon Steel Plates with low Sulphur levels can be supplied by producers using ladle – refining techniques. In general, wear resistance can be improved by increasing the hardness of EN8 Carbon Steel plates, by specifying an alloy with greater carbon content (without increasing hardness), or by both.
These EN8 Carbon Steel Slating Coils, which has good mechanical properties both at ambient and elevated temperatures of up to 930 Degree F (500 Degree C), is readily fabricated using the common industrial techniques. The chemical composition of EN8 Carbon Steel Perforated Coils provides great resistance to several corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress – corrosion cracking.
EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates | EN8 Carbon Steel Plates
The majority of these EN8 CS Plates make additions to a nickel – iron – chromium base. These additions allow EN8 CS Coils to adapt to the needs of a variety of industries and enable leading metal companies to offer a range of duplex shapes and designs. EN8 CS Slatting Coils has good mechanical properties from moderately to high temperatures. The hot – working range is 1600 Degree F to 2150 Degree F, where in addition these EN8 CS Perforated Coils has good weldability by all conventional processes.
EN8 Plates Specifications |
||
| Thickness | : | from 3mm up to as thick as 150mm |
| Size |
: | from 2000 x 1000mm up to 4000 x 2000mm |
| Length |
: | 100mm to 6000mm |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), Bright, Polish & Black |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc. |
EN8 Plates Chemical Composition
| Grade | C | Mn | P | S | Si |
| EN8 | 0.35 TO 0.45 | 0.60 TO 1.00 | 0.06 max | 0.06 max | 0.05 – 0.30 |
EN8 Sheets, Plates Heat Treatment
| Grade | HEAT TREATMENT | CORRESPONDING SPECIFICATION | |||||
| Hardening Temperature | Quenching Medium | Tempering Temperature | Brinell Rock well hardness | JAPAN JIS | AISI | POLDI THREAD | |
| EN-8 | 750-900 | OIL | 150-200 | – | – | – | – |
EN8 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a recognized trader and Stockist of ASTM A516 Gr 60 Plates ,Sheets, Coils, which differs from other carbon steel by the amount of chromium present.
60 Carbon Steel Plates rusts readily when exposed to air and moisture.
60 Carbon Steel Slating Coils has good mechanical properties at cryogenic temperatures to moderately high temperatures up to 538 Degree C.ASME SA 516 Gr.
60 Carbon Steel Perforated Coils, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulphuric and phosphoric acids.
60 Carbon Steel Slating Coils is designed to provide exceptional resistance to a lot of corrosive environments.ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 Plates | ASTM A516 Gr 60 PlatesThe levels of molybdenum and copper enable ASME SA 516 Gr.
60 CS Plates gives resistance to oxidizing conditions, such as nitric acid solutions, nitrates and oxidizing salts.
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of Hastelloy B2 Threaded Forged Fittings, which are made in cohesion with the universally defined quality standards and norms.
Due to the presence of high molybdenum content, our Hastelloy B2 Forged Threaded Elbow Fittings (UNS N10665) is expensive.
These Hastelloy B2 Forged Threaded Tee Fittings is one of the most popular nickel steel alloys for a reason.
Our Hastelloy B2 Forged Threaded Cross Fittings provides resistance to pure sulfuric acid and a number of non – oxidizing acids.These Hastelloy B2 Forged Threaded Cap Fittings can be used in the as-welded condition because it resists the formation of grain – boundary carbide precipitates in the weld heat – affected zone.
Our Hastelloy B2 Forged Threaded Bend Fittings with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions.
Meanwhile, our Hastelloy B2 Forged Threaded Coupling Fittings are also being offered in customized sizes and shapes to our customers.Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged Fittings| Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged Fittings | Hastelloy B2 Threaded Forged FittingsThese Hastelloy B2 Forged Threaded Union Fittings prevents carburization and suffixation at the elevated temperatures.
Sachiya Steel International is a Leading Manufacturer And Exporter Of a wide range of Stainless Steel 321 Tube to Male Fittings, which is available at best price.
Stainless Steel 321 Tube Fittings has increased resistance to scaling and intergranular corrosion (versus 304 / 316 material) due mainly to its added titanium content.
Titanium addition in Stainless Steel 321H Tube Fittings eliminates the formation of chromium carbides at the grain boundaries by tying up the carbon and nitrogen as titanium carbides or nitrides.
While processing only stainless tools like steel brushes in Stainless Steel 321 Compression Tube Fittings, pneumatic picks and so on are allowed, in order to not endanger the passivation.Stainless Steel 321H Compression Tube Fittings is similar to stainless steel 304, but with higher nickel content and stabilized with titanium.
Welding should be carried out using Stainless Steel 321 Male Connector Fittings or similar electrodes or rods (depending upon application), where no pre heat or post heat is generally required.Stainless Steel 321H Male Connector Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60 °C.
Stainless Steel 321H Ferrule Fittings can be used in up to 10 % diluted solutions at elevated temperatures.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 201 Threaded Forged Fittings, which belongs to the transition metals and is hard and ductile.
An important reason for its success is that the corrosion product of Nickel 201 Forged Threaded Elbow, such as nickel chloride, has a relatively low solubility in this range of concentration.
Because of this reason, Nickel 201 Forged Threaded Tee should be used only with caution when solutions are at high velocity.
Nickel 201 Forged Threaded Cross is a chemical element, where it is a silvery-white lustrous metal with a slight golden tinge.Nickel 201 Forged Threaded Cap, powdered to maximize the reactive surface area, shows a significant chemical activity, but larger pieces are slow to react with air under standard conditions because an oxide layer forms on the surface and prevents further corrosion (passivation).
Nickel 201 Forged Threaded Fittings has excellent resistance to anhydrous hydrofluoric acid even at elevated temperatures.Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged FittingsIn aqueous solutions for Nickel 201 Forged Threaded Coupling, however, service is usually limited to below 180 Degree F (80 Degree C).
Nickel 201 Forged Threaded Union has limited usefulness in commercial phosphoric acid solutions.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Inconel 600 Threaded Forged Fittings, where customers can purchase the same at industry-leading prices.
Our Inconel 600 Forged Threaded Elbow (UNS N06600) is used for furnace components, in chemical and food processing, etc.
These Inconel 600 Forged Threaded Tee display freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
The high nickel content in our Inconel 600 Forged Threaded Cross enables it to retain considerable resistance under reducing conditions.These Inconel 600 Forged Threaded Cap is also often used in high-temperature static applications.
Inconel 600 Elbow Forged Fittings shows high levels of atmospheric corrosion.
Our Inconel 600 Forged Threaded Fittings cannot be hardened by heat treating and also displays good heat resistance and freedom from aging or stress corrosion throughout the annealed to heavily cold worked condition range.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of Stainless Steel 304 Flanges, which are used to nickel to maintain an austenitic composition at lower temperatures.
Stainless Steel 304 Slip On Flanges is austenitic stainless steels with superior corrosion resistance to stainless steel 317.
These Stainless Steel 304 Threaded Flanges is suitable for welding because it has carbon content lower than 301 to 303 series alloys to avoid carbide precipitation in welding applications.Equipment in the chemical, food, paper, mining, and pharmaceutical and petroleum industries often includes Stainless Steel 304 Weld Neck Flanges.
The addition of molybdenum and slightly higher nickel content make Stainless Steel 304 Blind Flanges suitable for architectural applications in severe settings, from polluted marine environments to areas with sub-zero temperatures.
Stainless Steel UNS S30400 Socket Weld Flanges also offer higher creep, stress – to – rupture and tensile strength at elevated temperatures, excellent corrosion resistance and strength properties, and they are well suited for fabricated or formed applications.Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges | Stainless Steel 304 Flanges| Stainless Steel 304 Flanges | Stainless Steel 304 Flanges Stainless Steel 304 Lap Joint Flanges is ideally suited for applications requiring corrosion resistance superior to Type 316 and has good elevated temperature strength.
Stainless Steel 304 Ring Joint Type Flanges is the lower carbon version and is immune from sensitization.
