Sachiya Steel International is one of the prominent exporter & wholesaler of Stainless Steel 304L Screw, is the lower carbon version of the alloy. Stainless Steel 304L Hex Head Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). Stainless Steel 304L Socket Head Cap Screws does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid.
Stainless Steel 304L Socket Set Screws should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post – weld anneal. The high temperature oxidation resistance of Stainless Steel 304L Anchor Screws is similar to that of other stainless steels. Stainless Steel 304L Blind Rivet Screws cannot be hardened by heat treatment, only by cold working.
Stainless Steel 304L Concrete Screws can be easily welded and processed by standard shop fabrication practices. Often in many product forms, the grain size and carbon content of Stainless Steel 304L Threaded Screws can meet excellent requirements of clients. The high corrosion resistance of Stainless Steel 304L Steel Shoulder Screws ensures significantly more uptime than carbon steels and conventional stainless steels, while the mechanical strength allows for lighter constructions, more compact system design and less welding. As their names imply, Stainless Steel 304L Panel Screws consist mainly of one phase, austenite or ferrite.
|
SS 304L Screws Specifications
|
||
| Specifications | : | ASTM A 193 ASME SA 193 |
| Standard | : | IS, ASTM, BS and all International Standards |
| Length | : | 3 mm to 200 mm |
| Size | : | M3 – M33 |
| Type | : | Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw. |
Sachiya Steel International is renowned Manufacture And Exporter of high quality Stainless Steel 304L Angle, which is an array of stainless steel structures manufactured by us.
Stainless Steel 304L Angle are manufactured by using state of art welding equipment and also machined to required parameters under strict observations and supervision of technically strong supervisors.
The welding of Stainless Steel 304L C-Channel is calculated and supports are provided at proper positions to minimize the distortions while fabricating these components.Our Stainless Steel 304L H-Beam is then stress relieved to remove all the residual stresses induced during the welding process.
These industrial components of Stainless Steel 304L I-Beam call for very deep and thorough knowledge on all the fronts of the products such as: planning, execution, procurement, fabrication, machining, handling, Inspection and delivery.
All developments and process layouts of our Stainless Steel 304L T-Beam are formulated keeping in mind various parameters and requirements of the components.Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L Angle | Stainless Steel 304L AngleFew of the industries served Stainless Steel 304L Chain are Energy, Machine Building, Power, Glass, traction Motors for Railways, etc.
We present you a vast array of locomotive parts made by these SS 304L Angle that are widely demanded and appreciated in the locomotive industry for their reliable and efficient operations.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Buttweld Fittings, which can get marked up by fingerprints and grease, develop discoloration, and eventually rust.
Stainless Steel 304L Pipe Fittings is austenitic steel possessing a minimum of 18 % chromium and 8 % nickel, combined with a maximum of 0.08 % carbon.
Stainless Steel 304L Elbow is nonmagnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths.As a result, Stainless Steel 304L Tee Pipe Fittings can be used in as – welded condition, even in severe corrosive conditions.
Stainless Steel 304L Reducer often eliminates the necessity of annealing weldments except for applications specifying stress relief.
Stainless Steel 304L Long Stub End Pipe Fittings has slightly lower mechanical properties than Type 304.
Stainless Steel 304L End Cap Pipe Fittings is non – harden able by heat treatment, where annealing of heat is done up to 1900 Degree F – 2050 Degree F (1038 Degree C – 1121 Degree C), then cool rapidly.Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld Fittings | Stainless Steel 304L Buttweld FittingsThin strip sections of Stainless Steel 304L Dish Cap Pipe Fittings may be air cooled, but heavy sections should be water quenched to minimize exposure in the carbide precipitation region.
Sachiya Steel International is the top most Manufacture & Exporter in Stainless Steel 304 Screw , which has slightly improved corrosion resistance over stainless steel 321 screws in strongly oxidizing environments.
Stainless Steel 304 Hex Head Screws is also advantageous for high temperature service because of its good mechanical properties.
Stainless Steel 304 Socket Head Cap Screws offers higher creep and stress rupture properties than Stainless Steel 317 Screws, which might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Stainless Steel 304 Socket Set Screws is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular – corrosion resistance.
Stainless Steel 304 Anchor Screws has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Stainless Steel 304 Blind Rivet Screws is the higher carbon (0.04 – 0.10) version of the alloy, which does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid.
Stainless Steel 304 Concrete Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
In most instances, the carbon content of Stainless Steel 304 Threaded Screws enables dual certification.
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices.
The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures.
Stainless Steel 304L Threaded Forged Tee does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.
Stainless Steel 304L Threaded Forged Cross erforms well in fresh water service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting.Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes.
The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged Fittings | Stainless Steel 304L Threaded Forged FittingsFor maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working.
Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Tube to Union, which is designed to be as the low carbon version and a medium carbon stainless steel.
Stainless Steel 304L Tube Fittings has many of the same characteristics and applications as 316, such as the ability to withstand high temperatures, resistance to oxidation and corrosion, and machinability similar to that of Stainless Steel 304L.Composed of 20 percent nickel and 25 percent chromium, Stainless Steel 304L Compression Fittings is efficient in reducing environments such as those that contain Sulphur.
Combined with its low carbon content, Stainless Steel 304L Union Tube Fittings is also effective at resisting embrittlement.
Stainless Steel 304L Ferrule Fittings is commonly utilized in extreme conditions, such as furnace manufacturing and heat treating equipment.
While both hot and work practices can be applied, cold working is not commonly done on Stainless Steel 304L Double Ferrule Fittings; however, it is the only way to work – harden the metal.Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to Union | Stainless Steel 304L Tube to UnionThis resistance to cold temperatures is useful in cryogenic environments, as SS 304L Tube Fittings is incredibly tough.
However, SS 304L Compression Fittings can be subject to thermal shock and therefore should be treated and hot – worked with care.
