logo
logo
Sign in

A Complete Guide To Optimal Stacks For A Quality Fire

avatar
Oakford Firewood
A Complete Guide To Optimal Stacks For A Quality Fire

Splitting Perth firewood in Western Australia (WA) is necessary to make your firewood small to handle. However, it is important to know the ideal size to cut your firewood. You also need to know the consequences of long, thick or whole firewood on the efficiency and performance of your fire.

 

You should split your firewood to 16 inches long and 3 to 6 inches wide. This is optimal for stoves and household fires. Thinner firewood burns too quickly while thicker firewood takes too long to season. Outdoor fires have fewer restrictions when it comes to log size since you can burn any log size. There is more to having optimal stacks than just size. You should know what it takes to get the most out of your firewood.

 

Optimising your firewood splits

There are several advantages to splitting your firewood. There are several methods you can split your firewood manually and choosing the right tools and way can save energy and time. It is also essential to know the type of wood you are splitting, how long it takes to dry the wood and how to tell if your firewood is dry. Seasoning your wood fully is vital to your health. Greenwood produces carcinogens when it burns.

 

Splitting your wood to the correct size

You can use wedges or a maul when manually splitting your firewood. We will look at both ways.

 

Using a maul to split firewood

A maul is thicker and heavier than an axe and it is wedge-shaped. A maul is used to split firewood supplies while an axe is used to chop wood. However, you can still use an axe to split firewood if that is all you have. You should saw or chop longer pieces of firewood to around 167 inches long. Make your cuts flat to ensure the logs balance when splitting. You will need a chopping block such as a tree trunk.

Place your log on a block and carefully inspect the grain. If you see some cracks, you should split your log along the cracks. Control the maul with precise swings. Avoid bringing the maul above your head. The weight of the maul should produce the required force. You can also use wedges with a sledgehammer if you do not have a maul.

 

How to split using wedges

If you have difficult logs to split, wedges are the best for such tasks. You should start by tapping your wedge at the center of the grain before you hammer the wedge into the log. You can use two wedges if a single wedge does not split your wood.

 

Is it better to split dry or wet wood?

You might be wondering whether it is better to split dry or wet Perth firewood WA. Even though the main reason for splitting wood is to speed up the drying process, it is easier to cut through dry wood. Moisture in wet wood creates resistance and this makes the process more difficult. Most people in Western Australia split their wood after harvesting to reduce the drying time.

collect
0
avatar
Oakford Firewood
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more