Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Nipple, which are used even in aesthetic applications. Our Titanium Grade 2 Hexagon Reducing Nipple demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries.
Corrosion resistance is similar between these Titanium Grade 2 Hexagon Nipple but mechanical properties vary along with varying oxygen and iron contents. This Titanium Grade 2 One End Threaded Nipple is a widely used grade that offers a yield strength of 275MPa (40ksi) minimum. Our Titanium Grade 2 Both End Threaded Nipple has very high tensile strength and toughness (even at extreme temperatures). Titanium Grade 2 Concentric Swaged Nipple is unalloyed titanium and what is considered as “commercially pure” titanium.
Titanium Gr 2 Nipple | Titanium Gr 2 Nipple | Titanium Gr 2 Nipple | Titanium Gr 2 Nipple | Titanium Gr 2 Nipple
Limited impurities are iron, nitrogen and oxygen in our Titanium Grade 2 Eccentric Swaged Nipple, where these elements raise the mechanical properties (hardness, yield and tensile strength) at the expense of elongation. In Commercially Pure Titanium Grade 2 Hex Nipple, the mechanical properties are controlled by the chemistry input; higher amounts of Nitrogen, Oxygen, and Iron will increase strength properties. Our Ti Gr. 2 Nipple has good cold forming characteristics and provides excellent corrosion resistance. Commercially pure, or CP, Ti Gr. 2 Hexagon Reducing Nipple is unalloyed, where at service temperature it consists of 100 % hcp alpha phase.
|
Titanium Gr 2 Nipple
|
||
| Specifications | : | ASTM B366, ASME SB 366 |
| Dimensions | : | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Size | : | ½” NB to 24″NB |
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade2 | 99.2 min | 0.1 max | 0.3 max | 0.015 max | 0.03 max | 0.25 max | – | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 2 | 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Grade2 | 3.7035 | R50400 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter of Titanium Gr 2 Threaded Forged Fittings, which has some best features to offer such as highly efficient, rust proof, longer service life and more.
Continuous service temperatures in these Titanium Grade 2 Forged Threaded Elbow can reach up to 800 Degree F with occasional, intermittent service at 1000 Degree F. It’s high strength, low weight ratio give our Titanium Grade 2 Forged Threaded Tee a diversified range of applications ranging from medical applications to aerospace and automotive fabrication.These Titanium Grade 2 Forged Threaded Cross combines excellent corrosion resistance and weldability with good strength, ductility and formability.
Meanwhile, our Titanium Grade 2 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
We also offer these Titanium Grade 2 Forged Threaded Fittings at market leading prices to our clients.
Our Titanium Grade 2 Forged Threaded Coupling is highly resistant to corrosion and has excellent physical and mechanical properties.Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged Fittings | Titanium Gr 2 Threaded Forged FittingsThese Titanium Grade 2 Forged Threaded Union can be welded by the conventional techniques used with austenitic stainless steels.
Nevertheless, the heat affected zone in our Titanium Grade 2 Forged Threaded Bushing must be protected by either argon, helium or a mixture because of the material’s reactivity.
Sachiya Steel International offers a superior quality of Titanium Gr 2 Plates, Sheets and Coils, which has a number of outstanding features to offer such as dimensionally stable, fine finish, high material power, etc.
Titanium Grade 2 Plates as well has some other excellent features to offer such as hard-wearing, light weight, soaring tensile potency and so on.
Superior quality steel is used by our specialists to make the offered collection of Titanium Grade 2 Coils following market set rules.The offered range of Titanium Grade 2 Slating Coils is made by keeping in deliberation the demands of our respectable clienteles.
Available in the company of us is a higher quality variety of Titanium Grade 2 Perforated Coils.
Meanwhile, Grade 2 Titanium Plates are also being offered in different sizes and shapes to our customers.
Grade 2 Titanium Coils is also used in Automotive, Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Hydro Carbon Processing, Marine, Medical, and Power Generation.Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 Plates | Titanium Gr 2 PlatesGrade 2 Titanium Slating Coils is widely used because it combines excellent formability and moderate strength with superior corrosion resistance.
Sachiya Steel International is a Leading Manufacturer And Exporter of Titanium Gr 2 Tube to Male Fittings, where strong reducing media may cause heavy corrosion.
Titanium Grade 2 Tube Fittings has the highest formability, along with the highest strength and moderate formability.
Titanium Grade 2 Compression Fittings shares many of the same qualities as Grade 1 titanium, but it is slightly stronger, but both are equally corrosion resistant.
Comparable to austenitic stainless steel, the low speed, heavy feed rate and abundant cutting fluid, Employ safety measures of Titanium Grade 2 Ferrule Fittings are excellent because titanium is extremely combustible.This mixture has a solid solubility which varies dramatically with temperature, allowing Titanium Grade 2 Double Ferrule Fittings to undergo precipitation strengthening.
Titanium Grade 2 Male Connector Fittings is alloyed titanium and is considered to be an alpha – beta alloy.
This combination of properties makes Grade 2 Titanium Compression Fittings a candidate for a large variety of chemical and marine as well as aerospace and medical applications.Grade 2 Titanium Male Connector Fittings is the most commonly used grade of titanium, where further it has good weldability and is easily formable.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of a high quality Titanium Gr.2 Tube to Union Fittings, which has some excellent features to offer such as fine finish, dimensionally stable, high material strength, and more.
Available with us is a superior quality assortment of Titanium Grade 2 Tube Fittings.
The offered spectrum of Titanium Grade 2 Compression Fittings is manufactured keeping in consideration the requirements of our respectable customers.
High quality steel is utilized by our experts to manufacture the offered range of Titanium Grade 2 Ferrule Fittings following industry set guidelines.Titanium Grade 2 Double Ferrule Fittings also has some other exceptional features to offer such as durable, light weight, high tensile strength and more.
Grade 2 Titanium Tube Fittings has outstanding corrosion resistance and useful strength (similar to austenitic stainless steels) at low density.Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings | Titanium Gr.2 Tube to Union Fittings Grade 2 Titanium Compression Fittings resist in contact with salt water and marine atmosphere, oxidizing acids, chlorides (in presence of water).
Grade 2 Titanium Ferrule Fittings has good corrosion resistance in a wide variety of acids, alkali, and industrial atmospheres.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment.
Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector.
Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.Titanium Gr 2 Tube to Female Pipes SpecificationsSpecifications:ASTM B381 ASME SB 381Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
