Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Nipple, which is the alloy used in motorsport and in aerospace. Titanium Grade 5 Hexagon Reducing Nipple demand high levels of reliable performance in surgery and medicine as well as in aerospace, automotive, chemical plant, power generation, oil and gas extraction, sports, and other major industries. Typical applications of Titanium Grade 5 Hexagon Nipple include compressor blades, discs, rings for jet engines, aircraft components, pressure vessels, rocket engine cases; the most versatile titanium alloy.
Referred to as the “work horse” grade, Titanium Grade 5 One End Threaded Nipple is most commonly found in the annealed condition and most widely used of all titanium alloys. The wrought Titanium Grade 5 Both End Threaded Nipple is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required.
Titanium Gr 5 Nipple | Titanium Gr 5 Nipple | Titanium Gr 5 Nipple | Titanium Gr 5 Nipple | Titanium Gr 5 Nipple
Titanium Grade 5 Concentric Swaged Nipple has good tensile properties at ambient temperature and a useful creep resistance up to 300 Degree C (570 Degree F). Titanium Grade 5 Eccentric Swaged Nipple is used in the annealed condition and in the solution treated and aged condition. Some applications of Ti Gr. 5 Nipple include: compressor blades, discs, and rings for jet engines; airframe and space capsule components. Grade 5 Titanium Hexagon Reducing Nipple is the aerospace grade and is not cold formable, so it is used more often when no forming is needed.
|
Titanium Gr 5 Nipple
|
||
| Specifications | : | ASTM B366, ASME SB 366 |
| Dimensions | : | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
| Size | : | ½” NB to 24″NB |
| Grade | Ti | C | Fe | H | N | O | Al | V |
| Ti Grade5 | 90 min | – | 0.25 max | – | – | 0.2 max | 6 min | 4 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Titanium Gr. 5 | 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Gr. 5 | 3.7165 | N56400 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International offers an enormous variety of Titanium Gr 5 Plates ,Sheets and Coils, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers.
Our Titanium Grade 5 Coils is castable and is used “as cast” in sporting goods.These Titanium Grade 5 Slating Coils provides an outstanding grouping of high toughness and strength.
Titanium Grade 5 Perforated Coils has excellent tensile properties at ambient temp and a worthwhile creep resistance for up to 570 Deg F. Meanwhile, these Grade 5 Titanium Plates are also being offered in different sizes and shapes to our customers.Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates| Titanium Gr 5 Plates \ Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 PlatesCommercially Pure (CP), Grade 5 Titanium Coils, in its annealed state, is a ductile metal.
Resistance to fatigue and crack propagation is excellent of these Grade 5 Titanium Slatting Coils.
5 Sheets has a density of 4.51 g/cc – less than 60 % that of steel.
5 Plates should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Channel Other Products, which can be machined using slow speeds and high feed rates.
Design of experimental technique in Titanium Grade 5 Angle, that is, response surface methodology (RSM), has been used to accomplish the objective of the experimental study.
Wrought Titanium Grade 5 C-Channel is used in aerospace, medical, and other applications where moderate strength, good strength to weight, and favorable corrosion properties are required.Titanium Grade 5 Chain is the most widely used titanium alloy of the alpha – plus – beta class, and is also the most common of all titanium alloys.
We export a wide assortment of Titanium Grade 5 I-Beam that is suitable for applications like static and rotating gas turbine engine components.
The addition of 0.05 % palladium, 0.1 % ruthenium or 0.05 % palladium and 0.5 % nickel in Titanium Grade 5 H-Beam significantly increases corrosion resistance in reducing acid chloride and sour environments, raising the threshold temperature to well over 200 Degree C.Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 Channel | Titanium Gr 5 ChannelTitanium Grade 5 T-Beam is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium, and also has ELI (Extra Low Interstitial).
Grade 5 Titanium Angle can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Tube to Female Pipes , which has improved ductility and fracture toughness with some reduction in mechanical strength.
Titanium Grade 5 Tube Fittings and its related alloys resist a wide range of acid conditions being highly resistant to oxidizing acids, possessing useful resistance to reducing acids and offering good resistance to most organic acids at lower concentrations and temperatures.
Hot Isotactic Pressure of Titanium Grade 5 Compression Fittings applied in an inert atmosphere (argon) to eliminate micro – porosity and shortage of material inside the casting.Titanium Grade 5 Female Connector Fittings is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium; is a medium strength product.
The usability makes Titanium Grade 5 Ferrule Fittings the best alloy for use in several industries, like the aerospace, medical, marine and chemical processing industries.
Besides alpha – phase stabilizers, Titanium Grade 5 Double Ferrule Fittings are alloyed with 1 % – 2 % of beta phase stabilizers such as molybdenum, silicon or vanadium.Ti Gr.
5 Tube Fittings are the smallest group of titanium alloys and have good hardenability and can be heat treated to high yield strengths.
Sachiya Steel International is a prominent manufacturer, trader and supplier of a vast collection of Titanium Gr 2 Round Bar.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media.Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3.
Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum.
By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar| Titanium Gr 2 Round Bar | Titanium Gr 2 Round BarMeanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers.
Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium.
Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.
Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability.
Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.
For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.Ti Alloy Gr.
2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die.
