Sachiya Steel International is one of the well-known Manufacture and Exporter of high quality Stainless Steel 310H Tube to Female Pipes, which have very substantial contents of the high cost ingredients nickel and molybdenum. Many of the applications in which this grade has previously performed well can now be fulfilled at lower cost, so Stainless Steel 310H Tube Fittings is used less commonly than in the past. Although Stainless Steel 310H Compression Fittings is originally developed for its resistance to sulphuric acid it also has a very high resistance to a wide range of environments.
Stainless Steel 310H Female Fittings indicates that the material has good resistance to warm sea water and other high chloride environments. In SS 310H Tube Fittings, high nickel content results in a much better resistance to stress corrosion cracking than the standard austenitic grades. Copper in 310H Stainless Steel Compression Tube Fittings adds resistance to sulphuric and other reducing acids, particularly in the very aggressive “mid concentration” range.
In most environments, SS 310H Ferrule Tube Fittings has a corrosion performance intermediate between the standard austenitic grade and the very highly alloyed molybdenum along with similar “super austenitic” grades. In aggressive nitric acid, SS 310H Double Ferrule Tube Fittings has less resistance than molybdenum – free grades such as 304L and 310L. For maximum stress corrosion cracking resistance in critical environments, SS 310H Compression Fittings should be solution treated after cold work.
|
Stainless Steel 310H Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 310H | min. | 0.04 | – | – | – | – | 24.0 | – | 19.0 | – |
| max. | 0.10 | 2.0 | 1.00 | 0.045 | 0.03 | 26.0 | 21.0 | – | ||
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 310H | 515 | 205 | 40 | 95 | 217 |
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
| 0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
| 310H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 310H | S31009 | – | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter of high quality Stainless Steel 310H Tube to Union Fittings, which is the basic 18 / 8 austenitic steel stabilized with Titanium.
Stainless Steel 310H Tube Fittings is not sensitive to inter – granular corrosion after heating within the carbide precipitation range of 425 Degree C – 850 Degree C. Stainless Steel 310H Compression Fittings is the grade of choice for applications in the temperature range of up to about 900 Degree C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.Stainless Steel 310H Union Fittings is a modification of Type 321 with a controlled higher carbon content, to provide improved high temperature strength.
A limitation with Stainless Steel 310H Ferrule Fittings is that titanium does not transfer well across a welding arc, so is not usable as a welding consumable.
Stainless Steel 310H Double Ferrule Fittings is therefore used – the niobium performs the same carbide stabilization task but can be transferred across a welding arc.Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings | Stainless Steel 310H Tube to Union Fittings310H Stainless Steel Compression Fittings is only occasionally used as parent plate material.
Like other austenitic grades, 321 has excellent forming and welding characteristics, is readily brake or roll formed and has outstanding welding characteristics.
310H Stainless Steel Tube Fittings is therefore the standard consumable for welding Grade 321.
Sachiya Steel International is one of the Leading Manufacture And Exporter of high quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range.
These Stainless Steel 310H Compression Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50 Degree C. This treatment in our Stainless Steel 310H Male Connector Fittings follows normal solution treatment, where heat up to approx.870 Degree C – 890 Degree C for thickness and air cool.
Stabilization of these Stainless Steel 310H Ferrule Tube Fittings is recommended for most severe service conditions (above 425 Degree C) and particularly for material annealed at the upper side of the annealing temperature range.
Our Stainless Steel 310H Ferrule Double Ferrule Tube Fittings combines excellent service properties at high temperatures by means of ease of fabrication.Stainless Steel 310H Tube to Male Fittings | Stainless Steel 310H Tube to Male Fittings | Stainless Steel 310H Tube to Male Fittings | Stainless Steel 310H Tube to Male Fittings | Stainless Steel 310H Tube to Male FittingsThese Alloy 310H Tube Fittings resists oxidation at temperatures up to 1150 Degree C and can provide superior service to Grade 304 in carbon, nitrogen and Sulphur containing atmospheres.
Although not designed for aqueous corrosion resistance, the high chromium and nitrogen content gives our SS 310H Male Connector Fittings a pitting resistance approximating that of 316.Stainless Steel 310H Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 310H Tube To Male Fittings Chemical CompositionGradeCMnSiPSCrMoNiNSS 310H0.04 – 0.102 max1.00 max0.045 max0.030 max24.00 – 26.00–19.00 – 21.0053.885 minStainless Steel 310H Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540% Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 310H–S31009––––– SS 310H Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Tube to Male Fittings, which is considered resistant at ambient temperatures and reducing to about at 60 Degree C. Our Stainless Steel 310H Tube Fittings is equivalent to Grade 310 in the annealed condition and superior if the application involves service in the 425 Degree C – 900 Degree C range.
These Stainless Steel 310H Compression Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 50 Degree C.This treatment in our Stainless Steel 310H Male Connector Fittings follows normal solution treatment, where heat up to approx.
870 Degree C – 890 Degree C for thickness and air cool.
Stabilization of these Stainless Steel 310H Ferrule Tube Fittings is recommended for most severe service conditions (above 425 Degree C) and particularly for material annealed at the upper side of the annealing temperature range.
Our Stainless Steel 310H Ferrule Double Ferrule Tube Fittings combines excellent service properties at high temperatures by means of ease of fabrication.These Alloy 310H Tube Fittings resists oxidation at temperatures up to 1150 Degree C and can provide superior service to Grade 304 in carbon, nitrogen and Sulphur containing atmospheres.
Although not designed for aqueous corrosion resistance, the high chromium and nitrogen content gives our SS 310H Male Connector Fittings a pitting resistance approximating that of 316.Stainless Steel 310H Tube to Male Fittings SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass SS 310H Tube To Male Fittings Chemical Composition GradeCMnSiPSCrMoNiNSS 310H0.04 – 0.102 max1.00 max0.045 max0.030 max24.00 – 26.00–19.00 – 21.0053.885 min Stainless Steel 310H Tube To Male Fittings Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation7.9 g/cm31402 °C (2555 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540% Equivalent Grades for 310H Stainless Steel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENSS 310H–S31009––––– SS 310H Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us:Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 310H Round Bar, which is utilized for ease of fabrication.
Stainless Steel 310H Square Bars (UNS S31009) is a high carbon modification developed for enhanced creep resistance.
In most instances the grain size and carbon content of the plate can meet requirements of Stainless Steel 310H Flat Bars.
We are a leader in Indian markets for many years in the field of manufacturing of Stainless Steel 310H Threaded Bars that are required by the oilfield, petrochemical as well as other process industries.
Stainless Steel 310H Hollow Bars can be easily welded and processed by standard shop fabrication practices.Stainless Steel 310H Hexagonal Bars represents the optimum in machinability among the austenitic alloys.
Stainless Steel 310H Triangular Bars is primarily used when production involves extensive machining in automatic screw machines.
