Sachiya Steel International is pioneer Manufacture and Exporter of quality SMO 254 Tube to Female Pipes, which is commercially pure (99.6 %) wrought nickel. SMO 254 Tube Fittings is normally limited to service at temperatures below 600 Degree F. At higher temperatures, SMO 254 Compression Fittings can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices for SMO 254 Female Connector Fittings can be utilized when shaping this alloy.
SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes | SMO 254 Tube to Female Pipes
Hot working temperatures should be between 1200 Degree F and 2250 Degree F in SMO 254 Ferrule Fittings, with heavy forming to be performed at temperatures above 1600 Degree F. Annealing of SMO 254 Double Ferrule Fittings should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature for this can greatly influence the mechanical properties and structure of Alloy 254 Female Connector Fittings.
When operating temperatures in Alloy 254 Compression Tube Fittings are expected to exceed 600 Degree F, carbon content becomes critical. The lower carbon content of Alloy 254 Tube Fittings makes the material resistant to graphitization and therefore less subject to embrittlement. Alloy 254 Compression Fittings is approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Alloy 254 Ferrule Fittings has good mechanical properties and excellent resistance to many corrosive environments.
|
SMO 254 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM A403 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| SMO 254 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
| 17.5 – 18.5 |
0.02 max | 6 – 6.5 |
1 max | 0.8 max | – | 0.5 – 1 | 0.01 max | 0.03 max | 19.5 – 20.5 |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.0 g/cm3 | 1320-1390 ℃ | 300 | 650 | 35 % |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | SIS | GOST |
| SMO 254 | S31254 | 1.4547 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | – | 2378 | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International Is One Of The Leading Manufacturer And Exporter of SMO 254 Tube to Union Fittings , where we offer them in varied standard sizes and thickness and ensure long functional life.
These SMO 254 Tube Fittings (UNS S31254) offers chloride resistance superior to that of Alloy 904L, Alloy 20, Alloy 825 and Alloy G. Our SMO 254 Compression Fittings is a high alloyed austenitic stainless steel with exceptional corrosion resistance.
These SMO 254 Ferrule Fittings is substantially stronger than the common austenitic grades, with strength nearly twice that of 300 series stainless steel.Our SMO 254 Double Ferrule Fittings may offer a cost effective solution to Nickel and Titanium alloys in several environments.
Meanwhile, these SMO 254 Union Tube Fittings are also being offered in different sizes and shapes to our customers.
Because of the similarities among the 6Mo grades, our Alloy 254 Union Fittings may be used interchangeably, may be used together and the selection of a specific grade should be based on availability, price, and service.SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union Fittings | SMO 254 Tube to Union FittingsThese Alloy 254 Tube Fittings has a good weldability and the methods used for welding conventional austenitic steels are used.
Our Alloy 254 Compression Fittings is more sensitive to some extent in relation to hot cracking and shall be welded with low heat input.
Sachiya Steel International is one of the leading manufacturer and exporter of SMO 254 Tube to Male Fittings, which is used in wide – ranging commercial and industrial sectors and is quality guaranteed.
Our 254 SMO Tube Fittings is industrialized for use in halide – encompassing atmosphere such as hydrochloric acid, contaminated sulphuric acid and seawater.
These 254 SMO Compression Fittings is well – matched by means of the usual austenitic stainless steels, which can be further both cold and hot formed.
In a number of applications, our 254 SMO Ferrule Tube Fittings has been found to be an additional reasonable substitute for soaring titanium and nickel alloys.These 254 SMO Double Ferrule Tube Fittings (UNS S31254) is generally used in Parts used in petroleum manufacture, Flue gas desulfurization scrubbers, Food processing machinery, etc.
Meanwhile, these SMO 254 Male Connector Fittings are as well being offered in different sizes and shapes to our customers, where we as well offer the same in leading industry rates.
Due to a higher strength and alloy materials, these Alloy 254 Male Connector Fittings is difficult to machine.SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male Fittings | SMO 254 Tube to Male FittingsApplications for Our Alloy 254 Compression Tube Fittings include petroleum production, saltwater handling, food processing and chemical processing equipment, pulp mill bleach systems, flue gas desulfurization scrubbers and tall oil distillation columns.
Sachiya Steel International is one of the leading manufacturer and exporter of SMO 254 Tube to Male Fittings, which is used in wide – ranging commercial and industrial sectors and is quality guaranteed.
Our 254 SMO Tube Fittings is industrialized for use in halide – encompassing atmosphere such as hydrochloric acid, contaminated sulphuric acid and seawater.
These 254 SMO Compression Fittings is well – matched by means of the usual austenitic stainless steels, which can be further both cold and hot formed.
In a number of applications, our 254 SMO Ferrule Tube Fittings has been found to be an additional reasonable substitute for soaring titanium and nickel alloys.These 254 SMO Double Ferrule Tube Fittings (UNS S31254) is generally used in Parts used in petroleum manufacture, Flue gas desulfurization scrubbers, Food processing machinery, etc.
Meanwhile, these SMO 254 Male Connector Fittings are as well being offered in different sizes and shapes to our customers, where we as well offer the same in leading industry rates.
Due to a higher strength and alloy materials, these Alloy 254 Male Connector Fittings is difficult to machine.Applications for Our Alloy 254 Compression Tube Fittings include petroleum production, saltwater handling, food processing and chemical processing equipment, pulp mill bleach systems, flue gas desulfurization scrubbers and tall oil distillation columns.
