Sachiya Steel International is a prominent leader in exporting and supplying Carbon Steel AISI 1045 Angle And Other Carbon Steel Products, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated. This AISI 1045 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters. The resistance to a variety of corrosive conditions in our AISI 1045 Carbon Steel C-Channel led to its wide use in marine applications and other non – oxidizing chloride solutions.
As would be expected from its high copper content, this AISI 1045 Carbon Steel Chain is rapidly attacked by nitric acid and ammonia systems. This type of failure in our AISI 1045 Carbon Steel I-Beam is generally associated by means of an environment containing chlorides as well as with stress, water, dissolved oxygen, and other factors. The tendency of austenitic alloys to crack trans – granularly in chloride solutions decreases as the nickel content of our AISI 1045 Carbon Steel H-Beam is increased.
Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle
These AISI 1045 Carbon Steel T-Beam offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts. Our AISI 1045 CS Angle is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | AISI A1045 |
| Dimensions | : | EN, DIN, JIS, AISI, BS, ASME, AISI |
| Carbon Steel AISI 1045 Angle |
: | 5mm to 9mm |
| Carbon Steel AISI 1045 Channel |
: | 40mm*20mm~300mm*300mm |
| Carbon Steel AISI 1045 Beam | : | 3″ thru 12.31″ |
| Carbon Steel AISI 1045 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
AISI 1045 Angle, Channel, Beam, Chain Chemical Composition
| Grade | Mn | S | C | P | Si | Cr | Ni |
| AISI 1045 | 0.5-0.8 | 0.035 | 0.05-0.42 | 0.035 | 0.17-0.37 | 0.25 | 0.3 |
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Mechanical Properties
| Grades | Tensile Strength (ksi) min | Elongation (% in 50mm) min | Yield Strength 0.2% Proof (ksi) min | Hardness |
| AISI1045 | 600 | 40 | 355 | 229 |
Equivalent Grades for AISI 1045 Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| AISI 1045 | 1.1191 | G10450 |
Carbon Steel AISI 1045 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a prominent leader in exporting and supplying Carbon Steel AISI 1045 Angle, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated.
This AISI 1045 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters.The resistance to a variety of corrosive conditions in our AISI 1045 Carbon Steel C-Channel led to its wide use in marine applications and other non – oxidizing chloride solutions.
As would be expected from its high copper content, this AISI 1045 Carbon Steel Chain is rapidly attacked by nitric acid and ammonia systems.
This type of failure in our AISI 1045 Carbon Steel I-Beam is generally associated by means of an environment containing chlorides as well as with stress, water, dissolved oxygen, and other factors.Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 Angle |Carbon Steel AISI 1045 Angle | Carbon Steel AISI 1045 AngleThe tendency of austenitic alloys to crack trans – granularly in chloride solutions decreases as the nickel content of our AISI 1045 Carbon Steel H-Beam is increased.
These AISI 1045 Carbon Steel T-Beam offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.
Our AISI 1045 CS Angle is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.
Sachiya Steel International is a prominent leader in exporting and supplying Carbon Steel AISI 1018 Angle Other Carbon Steel Products, which is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated.
This AISI 1018 Carbon Steel Angle has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters.
The resistance to a variety of corrosive conditions in our AISI 1018 Carbon Steel C-Channel led to its wide use in marine applications and other non – oxidizing chloride solutions.As would be expected from its high copper content, this AISI 1018 Carbon Steel Chain is rapidly attacked by nitric acid and ammonia systems.
This type of failure in our AISI 1018 Carbon Steel I-Beam is generally associated by means of an environment containing chlorides as well as with stress, water, dissolved oxygen, and other factors.
The tendency of austenitic alloys to crack trans – granularly in chloride solutions decreases as the nickel content of our AISI 1018 Carbon Steel H-Beam is increased.Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 Angle | Carbon Steel AISI 1018 AngleThese AISI 1018 Carbon Steel T-Beam offer faster machining speeds, longer tool life, improved part quality, and lower total cost of machined parts.
Our AISI 1018 CS Angle is forged between 2250 Degree F / 1750 Degree F (1230 Degree C / 955 Degree C) following a soak at forging temperature of 30 minutes per inch of billet or ingot section thickness.
The new Galvanized steel Angle Market report offers a comprehensive study of the current scenario of the market including major market dynamics.
Also, it highlights the in-depth marketing research with the newest trends, drivers, and segments with reference to regional and country.
Further, this report profiles top key players and analyze their market share, strategic development, and other development across the world.The research report also covers the comprehensive profiles of the key players in the market and an in-depth view of the competitive landscape worldwide.
The major players in the Galvanized Steel Angle market include ArcelorMittal, Baowu Group, ThyssenKrupp, Steel Dynamics, Posco, Nippon Steel, Hesteel Group, Hyundai Steel, JFE Steel Corporation, Shougang Group, Ansteel Group.
This section consists of a holistic view of the competitive landscape that includes various strategic developments such as key mergers & acquisitions, future capacities, partnerships, financial overviews, collaborations, new product developments, new product launches, and other developments.Get more information on "Global Galvanized steel Angle Market Research Report" by requesting FREE Sample Copy at https://www.valuemarketresearch.com/contact/galvanized-steel-angle-market/download-sampleMarket DynamicsRapid urbanization and industrialization is a major factor influencing demand for Galvanized Steel Angle.
Galvanized Steel Angle is widely preferred as a lower-cost alternative to stainless steel to achieve rust-free protection for an extended period while maintaining comparable strength with a durable hard surface coating.
