Sachiya Steel International is one of the prominent Manufacture and Exporter of quality Nickel Alloy 200 Tube to Female Pipes, which is used in the section of Alkylation units in direct contact with concentrated hydrofluoric acid. Nickel 200 Tube Fittings can easily be welded by gas – tungsten arc, gas metal arc or shielded metal arc processes using appropriate filler metals. The nickel and copper contents of Nickel 200 Compression Tube Fittings were in the approximate ratio which is now formally specified for the alloy.
Nickel 200 Female Connector Fittings is a precipitation – harden able nickel – copper alloy that combines high strength, corrosion resistance and non – magnetic properties. There is no need for post weld heat treatment in Nickel 200 Compression Fittings, however, thorough cleaning after welding is critical for optimum corrosion resistance, otherwise there is the risk of contamination and embrittlement. Like most other nickel alloys, Nickel 200 Ferrule Tube Fittings is typically tough to machine and will work harden.
Nickel 200 Double Ferrule Tube Fittings has excellent results which can be obtained if you make the correct choices for tooling and machining. Alloy 200 Female Connector Fittings is a solid – solution binary alloy, which can be readily joined and fabricated. As nickel and copper are mutually soluble in all proportions, Alloy 200 Compression Tube Fittings is a single – phase alloy. Alloy 200 Ferrule Tube Fittings is perhaps the most resistant of all commonly used engineering alloys.
Nickel 200 Tube to Female Pipes Specifications
|
||
Specifications | : | ASTM B366 ASME SB 366 |
Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Pressure Rating |
: | 3000 – 4000 PSI |
Applicable Temperature |
: | 150-400 C |
Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
Nickel 200 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
99.0 min | 0.15 max | – | 0.35 max | 0.1 max | 0.4 max | – | 0.01 max | 0.25 max | – |
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 200 | N02200 | 2.4066 | N-100M | Ni 99.2 | NW 2200 | NA 11 | НП-2 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry