Sachiya Steel International offers a wide quality range of Incoloy 800 Wire which belongs to the category of super austenitic stainless steels where the general corrosion resistance is excellent. This Incoloy 800 Wire exhibits an austenite structure similar to austenitic stainless steels, and appropriate heat treatment procedures and requirements are similar. Our Incoloy 800H Wire is often used in Nitric acid catalyst supports, Reformer outlet pigtails and manifolds. Applications of this Incoloy 800HT Electrode include furnace components and equipment, pigtails and headers, sheathing for electrical heating elements and petrochemical furnace cracker tubes.

In the solution annealed condition, our Incoloy 800 Coil Wire has superior creep and stress rupture properties. The chemical balance allows this Incoloy 800H Wire to exhibit excellent resistance to oxidation, carburization and nitriding atmospheres. Incoloy 800HT Welding Filler is best joined / welded using products for high temperature situations and resistance to aqueous corrosion at moderate temperatures. Our Incoloy 800 Filler Wire is extremely functional as it maintains a stable structure, even when exposed to high temperature.

In addition to the chemistry restrictions, this Incoloy 800H Coil Wire receives a high temperature annealing treatment that produces an average grain size or coarser. Our Incoloy 800HT Welding Electrode is an iron – nickel – chromium alloy having sufficient resistance to carburization and oxidation at high temperatures as well as moderate strength.

Incoloy 800/800H/800HT Wire Specifications
Specifications : AMS 5766
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire

800 / 800H / 800HT Incoloy Alloy Wire Chemical Composition
Grade C Mn Si S Cu Fe Ni Cr Al Ti
800 0.10 max 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800H 0.05 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60 0.15 – 0.60
800HT 0.06 – 0.10 1.50 max 1.00 max 0.015 max 0.75 max 39.50 min 30.00 – 35.00 19.00 – 23.00 0.15 – 0.60ᴬ 0.15 – 0.60ᴬ

Incoloy 800 / 800H / 800HT Wire Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
800 / 800H / 800HT 7.94 g/cm3 1385 °C (2525 °F) Psi – 75,000 , MPa – 520 Psi – 30,000 , MPa – 205 30 %

Equivalent Grades for 800 / 800H / 800HT Incoloy Wire

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 800 1.4876 N08800 NCF 800 NA 15 ЭИ670 Z8NC32-21 X10NiCrAlTi32-20 XH32T
Incoloy 800H 1.4958 / 1.4876 N08810 NCF 800H NA 15(H) ЭИ670 Z8NC33-21 X5NiCrAlTi31-20 XH32T
Incoloy 800HT 1.4859 / 1.4876 N08811 NCF 800HT NA 15(HT) ЭИ670 X8NiCrAlTi32-21 XH32T

Incoloy 800/800H/800HT Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry