Sachiya Steel International is one of the well-known manufacturers for Hastelloy C22 Wire which is selected over different alloys for the clamshell bellows after extensive testing. Analysis of corrosion resistance of the tested material can also be performed in Hastelloy C22 Wire and the results provided to the customer as a free technical service. Hastelloy C22 Wire is tested for this hydrofluoric acid pre – scrubber after the original material failed. Sleeved electro – galvanizing finishing rolls made of Hastelloy C22 Coil Wire are ready for placement in a steel finishing manufacturing line.
Conditions were so severe in C-stage bleaching operations at one mill that even Hastelloy C22 Electrode welds were suspect. As a preventive maintenance measure, three millimeters was ground off each weld and replaced with a weld deposit of Hastelloy C22 Electrode. These Alloy C22 Coil Wire helps reduce defects on the rolls which is necessary to produce defect free galvanized steel for the automotive industry.
Alloy C22 Wire had four times better corrosion resistance than the original material and 20 percent better than the other alloys at 150 Degree F to 200 Degree F. Solid rocket propellant effluents and salt air in Alloy C22 Wire causes pitting and crevice corrosion attack of stainless steel. Alloy C22 Wire has a more restricted composition for improved performance, where these improvements are of such significance that it has been widely patented throughout the world.
|
Hastelloy C22 Wire Specifications
|
||
| Specifications | : | ASTM B574 ASME SB574 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | P | S | Cr | Mo | Fe | Co | Ni | V | W |
| Hastelloy C22 | 0.010 max | 0.50 max | 0.08 max | 0.02 max | 0.02 max | 20.0-22.5 | 12.5 – 14.5 | 2 – 6 | 2.5 max | bal | 0.35 max | 2.5-3.5 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Hastelloy C22 | 8.69g/cm3 | 1399 °C (2550°F) | Psi – 1,00,000 ,MPa-690 | Psi – 45000 , MPa – 310 | 45% |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Hastelloy C22 | 2.4602 | N06022 | NW 6022 | – | – | – | NiCr21Mo14W |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known Manufacture and Exporter for Hastelloy C22 Wire Mesh , which can be welded by all common methods and are highly versatile.
Displaying excellent resistance to stress corrosion cracking and non – oxidizing acids, Hastelloy C22 Hexagonal Wire Mesh have been used for numerous applications.
Hastelloy C22 Welding Wire Mesh is the most versatile of the Alloys and is widely used for chemical process equipment applications due to their excellent resistance to non – oxidizing environments.Water – base coolant should be premium quality for Hastelloy C22 Netting Wire Mesh, sulfochlorinated water soluble oil or chemical emulsion with extreme pressure additives.
Water – base coolant of Hastelloy C22 Woven Wire Mesh may cause chipping and rapid failure of carbide tools in interrupted cuts.
Hastelloy C22 Spring Steel Wire Mesh is an alloy that is precipitation harden able for high mechanical properties.Alloy C22 Hexagonal Wire Mesh maintains good strength and oxidation resistance at temperatures up to about 1300 Degree F (700 Degree C).
The high strength and excellent fabrication characteristics of Alloy C22 Welding Wire Mesh make it useful for various components of aircraft and industrial gas turbines.
Sachiya Steel International is one of pioneer Manufacture and Exporter for Hastelloy C22 Angle And Other Hastelloy Products, which is considered moderate to the difficult and to the machine one.
Nickel – based alloys such as Hastelloy C22 Angle have a tendency to crater crack, so grinding in starts and stops is recommended.
Prior to any welding in Hastelloy C22 Chain, all foreign matter (grease, cutting fluids, crayon markings, scale) should be removed.
Hastelloy C22 C-Channel can still be machined using conventional production methods used for other alloys at a satisfactory rate.In any process system, Hastelloy C22 H-Beam is much more cost – effective to proactively design for corrosion control than to reactively make repairs because of design deficiencies.
Until now, sanitary process system designers in Hastelloy C22 T-Beam have been limited to 300 series stainless steels.
These options have grown to include the super – austenitic stainless steel, as well as nickel alloys such as Hastelloy C22 I-Beam for sanitary tubing and fittings.Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle | Hastelloy C22 Angle During machining, our Alloy C22 Angle can harden rapidly, generate high heat, weld to the cutting tool surface, and resist metal removal, because of its high shear strength.
Sachiya Steel International offers a broad spectrum of Hastelloy Alloy C22 Forged Threaded Fittings to the esteemed clients, which are designed and engineered utilizing advanced technology and high quality metals.
Hastelloy C22 Forged Threaded Elbow Fittings (UNS N06022) has shown an outstanding resistance to a wide range of chemicals, including chlorides, organic and inorganic solutions.
Hastelloy C22 Forged Threaded Tee Fittings also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions.Hastelloy C22 Forged Threaded Cross Fittings has better overall corrosion resistance than Hastelloy C-4 & C-276 and Inconel 625.
Meanwhile, these Hastelloy C22 Forged Threaded Cap Fittings are as well being offered in customized sizes and shapes to our customers.
We also offer Hastelloy C22 Forged Threaded Bend Fittings at market leading rates.
Annealing of Hastelloy C22 Forged Threaded Coupling Fittings can be performed at a temperature range between the ranges of 2020 Degree F – 2150 Degree F followed by a rapid quench.Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings | Hastelloy Alloy C22 Forged Threaded Fittings Cooling of Hastelloy C22 Forged Threaded Union Fittings at an accelerated rate avoids the formation of detrimental phases which form between the ranges of 1400 Degree F – 1800 Degree F. Hastelloy C22 Forged Threaded Bushing Fittings also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams.
Sachiya Steel International is one of pioneer Manufacture and Exporter for Hastelloy C22 Tube to Female Pipes, which has shown moderate to poor resistance to hydrochloric acid.
In sulphuric acid, Hastelloy C22 Tube Fittings has shown useful resistance to concentrations of up to about 30 % at a temperature of 175 Degree F and about 10 % at boiling temperature.
Laboratory tests of Hastelloy C22 Compression Fittings at 175 Degree F have produced corrosion rates at 10 % concentration.Hastelloy C22 Ferrule Fittings has excellent resistance to phosphoric acid, which also gives rates for phosphoric acid containing 1 % of hydrofluoric acid.
Hastelloy C22 Double Ferrule Fittings has good fabricability, where annealing for cold forming should be done at 1900 Degree F. Forming, machining, and welding are carried out by standard procedures for Hastelloy C22 Female Connector Fittings.
The temperature range of Alloy C22 Compression Tube Fittings for heavy forming or forging is 1850 Degree F to 2200 Degree F, where light working can be done at temperatures down to 1700 Degree F.Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female PipesAlloy C22 Ferrule Tube Fittings is readily cold formed by conventional procedures although its work – hardening rate is high.
For best results, Alloy C22 Double Ferrule Tube Fittings should be cold formed in the fine – grain condition, and frequent intermediate anneals should be used.
