Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304H Buttweld Fittings, which is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Stainless Steel 304H Elbow is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel. Stainless Steel 304H Tee Pipe Fittings is exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.
Stainless Steel 304H Cross Pipe Fittings are useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions). Stainless Steel 304H Reducer is also commonly used with formic acid though it will tend to discolor the solution, which further resist damage from aldehydes and amines.
Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings
Fats and fatty acids only affect Stainless Steel 304H Stub End Pipe Fittings at temperatures above 150 Degree C (302 Degree F), and above is unaffected at all temperatures. Stainless Steel 304H Pipe Bend is required for processing of urea, which is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.
|
Stainless Steel 304H Pipe Fittings Specifications
|
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 304H | min. | 0.04 | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.010 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | – | ||
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 304H | 515 | 205 | 40 | 92 | 201 |
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 304H | S30409 | – | – | 1.4301 | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the pioneer trader and dealer of Stainless Steel 304H Buttweld Fittings , which is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures.
Stainless Steel 304H Elbow is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.Stainless Steel 304H Tee Pipe Fittings is exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld FittingsStainless Steel 304H Cross Pipe Fittings are useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions).
Stainless Steel 304H Reducer is also commonly used with formic acid though it will tend to discolour the solution, which further resist damage from aldehydes and amines.Fats and fatty acids only affect Stainless Steel 304H Stub End Pipe Fittings at temperatures above 150 Degree C (302 Degree F), and above is unaffected at all temperatures.
Stainless Steel 304H Pipe Bend is required for processing of urea, which is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.
Stainless Steel 304H Pipe Fittings SpecificationsSpecifications:ASTM A403 / ASME SA403Size:1/8” NB TO 48” NB.
(Seamless & 100% X-Ray Welded, Fabricated)Standards:ASME/ANSI B16.9, ASME B16.28, MSS-SP-43Thickness:5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75Type:Seamless / Welded / Fabricated SS 304H Pipe Fittings Chemical CompositionGradeCMnSiPSCrMoNiN304Hmin.0.04––––18.0–8.0–max.0.0102.00.750.0450.03020.010.5–
Sachiya Steel International is one of the leading Manufacturer And Exporter Stainless Steel 304H Pipe Fittings, which has a good mechanical properties and resistance to a range of corrosive media.
Stainless Steel 304H Compression Pipe Fittings has a lower carbon content to prevent embrittlement by inter – granular carbon at temperatures over 600 Degree F (315 Degree C).
Lower carbon content also reduces hardness, making Stainless Steel 304H Compression Fittings particularly suitable for cold – formed items.
Stainless Steel 304H Accessories are often required in complex applications, where corrosion and thermal resistance are demanded.
SS 304H Compression Pipe Fittings comprise of various types of pure nickel, binary alloys, ternary alloys, and super – alloys.SS 304H Compression Fittings is used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalies.
These SS 304H Ferrule Pipe Fittings are nickel – chromium – iron alloys as well as nickel and molybdenum alloys are alloys with high – temperature resistant properties.
Shashwat Stainless Inc. is the largest Pipe and Tubes Manufacturers in India.
One of our popular products in the Metal Market is ASTM Pipes and Tubes.
Shashwat Stainless Inc offers a wide range of products in different materials to its customers.
We also deal with Round Bars and Pipes and Tubes, Duplex Steel & Super Duplex Steel, Buttweld Fittings, Forged Fittings, Stainless Steel and Flanges.
