Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 201 Wire, which is one of the most widely used metals on the planet. Due to the naturally occurring iron content in lateritic ores of Nickel 201 Wire, the end product of most smelters working with such ores is ferro – nickel, which can be used by steel producers after silicon, carbon and phosphorus impurities are removed. Nickel 201 Coil Wire produces nickel oxide, which is then reduced using electric furnaces at temperatures between the ranges of 2480 Degree F – 2930 Degree F (1360 Degree C – 1610 Degree C) and volatilized to produce nickel metal and nickel sulphide.
Most often, Nickel 201 Wire is found in steels and metal alloys, but it is also used in the production of batteries and permanent magnets. The nickel – containing austenitic range of Nickel 201 is defined by their face – centered cubic (FCC) crystal structure, which has one atom at each corner of the cube and one in the middle of each face.
Nickel 201 Wire is primarily extracted from the nickel sulphide pentlandite, pyrrhotite, and milarite, which contain about 1 % nickel content, and the iron – containing lateritic ores limonite and garnierite, which contain about 4 % nickel content. Alloy 201 Wire is a strong, lustrous, silvery – white metal that is a staple of our daily lives.
|
Nickel 201 Wire Specifications
|
||
| Specifications | : | ASTM B160 ASME SB160 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Nickel 201 | 0.15 max | 0.35 max | 0.35 max | 0.25 max | 0.01 max | – | 0.40 max | 99.0 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-known exporter and manufacturer of quality Nickel Alloy 201 Angle And Other Nickel Alloy Products, which is tailor-made as per the customer’s specification and end application.
Nickel 201 Angle is that is alloyed with a variety of elements in total amounts between 1.0 % and 50 % by weight to improve its mechanical properties.
Nickel 201 Chain is trusted for their various salient features like corrosion resistance, durability and high tensile strength.Nickel 201 I-Beam is a metal alloy consisting mostly of iron, in addition to small amounts of carbon, depending on the grade and quality of the steel.
Nickel 201 H-Beam are made by combining carbon steel with one or several alloying elements, such as manganese, silicon, nickel, titanium, copper, chromium and aluminum.
The process of making Nickel 201 T-Beam is highly specialized and complex.
Ni 201 Angle contain specified amounts of alloying elements — other than carbon and the commonly accepted amounts of manganese, copper, silicon, Sulphur, and phosphorus.Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 Angle | Nickel Alloy 201 AngleNi 201 Chain also contains niobium for stabilization against sensitization and resultants inter – granular corrosion.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 200 Wire, where chlorine additives would be an alternative.
Nickel 200 Coil Wire is a Nickel based alloy containing 47.5 % Nickel, 22 % Chromium and 18.5 % Iron, with small amounts of Cobalt, Molybdenum and Tungsten.
All hot – or cold – worked parts of Nickel 200 Wire should be annealed and rapidly cooled in order to restore the best balance of properties.
Carbide tools in Nickel 200 Wire should have smaller angles than high – speed tools and operating speeds can be higher.After 100 hours in petroleum coke, Nickel 200 is completely penetrated by carburization; whereas its specimens showed no carburization at all.
Useful Properties for Aircraft and Furnace Parts, Nickel 200 Wire is recommended especially for use in furnace applications.
Alloy 200 Wire has unusual resistance to oxidizing, reducing, and neutral atmospheres, where work hardening occurs whenever a tool makes a cut.Its uncommon resistance to oxidation, combined with exceptional heat resistance and fabricability, make Alloy 200 a widely sought – after blend in a number of industries.
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Nickel Alloy 201 Threaded Forged Fittings, which belongs to the transition metals and is hard and ductile.
An important reason for its success is that the corrosion product of Nickel 201 Forged Threaded Elbow, such as nickel chloride, has a relatively low solubility in this range of concentration.
Because of this reason, Nickel 201 Forged Threaded Tee should be used only with caution when solutions are at high velocity.
Nickel 201 Forged Threaded Cross is a chemical element, where it is a silvery-white lustrous metal with a slight golden tinge.Nickel 201 Forged Threaded Cap, powdered to maximize the reactive surface area, shows a significant chemical activity, but larger pieces are slow to react with air under standard conditions because an oxide layer forms on the surface and prevents further corrosion (passivation).
Nickel 201 Forged Threaded Fittings has excellent resistance to anhydrous hydrofluoric acid even at elevated temperatures.Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged Fittings | Nickel Alloy 201 Threaded Forged FittingsIn aqueous solutions for Nickel 201 Forged Threaded Coupling, however, service is usually limited to below 180 Degree F (80 Degree C).
Nickel 201 Forged Threaded Union has limited usefulness in commercial phosphoric acid solutions.
Sachiya Steel International is one of the well-established Manufacture and Exporter of quality Nickel Alloy 201 Tube to Female Pipes, which consists of low carbon version of the alloy.
Nickel 201 Tube Fittings is associate solid solution heat resistant alloy with wonderful resistance to oxidization underneath gently cyclic conditions through 2000 Degree F. Nickel 201 Compression Fittings is quickly fancied by commonplace industrial procedures.
Nickel 201 Female Connector Fittings is compared to steel and unsullied steels that are harder and have a tendency to figure harden speedily.Nickel 201 Ferrule Tube Fittings is a heat resisting steel with high resistance to oxidization scaling and has high strength at elevated temperatures.
Nickel 201 Double Ferrule Tube Fittings may be welded victimization all of the common attachment processes.
Alloy 201 Compression Tube Fittings is combined with higher creep properties at temperature and unsullied which is incredibly powerful and ductile.
The unsullied of Ni 201 Female Connector Fittings has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female PipesWith its high metal content, Nickel 201 Tube Fittings offers smart corrosion resistance to extend warmth properties.
