Sachiya Steel International is a Leading Manufacture And Exporter of Alloy Steel F91 Threaded Forged Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties. Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance. Heat this Alloy Steel F91 Forged Threaded Tee Fittings uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool.
For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fittings up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool. Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties. If this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media.
Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings| Alloy Steel F91 Threaded Forged Fittings
The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fittings should be avoided. Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fittings should be approximately temperature of 650 Degree C.
Alloy Steel F91 Threaded Forged Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/2″ NB TO 48″ NB. |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Forged Fittings |
Alloy Steel F91 Threaded Forged Fittings Chemical Composition
| Grade | C | Mn | Si | S | P | Cr | Mo |
| Alloy Steel F91 | 0.08-0.12 | 0.3-0.6 | 0.5 | 0.01 | 0.02 | 8.5-9.5 | 0.85-1.05 |
Alloy Steel Grade F91 Threaded Forged Fitting Mechanical Properties
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 415 | 585 | 20 % |
Alloy Steel F91 Threaded Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Tel: +91 9769056007
Email: [email protected]
For More Information Visit Our Website : Steel Pipe Factory
Sachiya Steel International is a known Manufacture and Exporter of Alloy Steel F91 Threaded Forged Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties.
Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance.
Heat this Alloy Steel F91 Forged Threaded Tee Fittings uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool.For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fittings up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool.
Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties.Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged Fittings | Alloy Steel F91 Threaded Forged FittingsIf this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media.
The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fittings should be avoided.
Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fittings should be approximately temperature of 650 Degree C. Alloy Steel F91 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged Fittings Alloy Steel F91 Threaded Forged Fittings Chemical CompositionGradeCMnSiSPCrMoAlloy Steel F910.08-0.120.3-0.60.50.010.028.5-9.50.85-1.05Alloy Steel Grade F91 Threaded Forged Fitting Mechanical PropertiesTensile StrengthYield Strength (0.2%Offset)Elongation41558520 % Alloy Steel F91 Threaded Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Alloy Steel F91 Threaded Forged Fittings, which is not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties.
Our Alloy Steel F91 Forged Threaded Elbow Fittings has highly resistant to stress corrosion cracking if aged at 550 Degree C or higher, where higher aging temperatures give better SCC resistance.
Heat this Alloy Steel F91 Forged Threaded Tee Fitting uniformly up to 1200 Degree F / 1400 Degree F (650 Degree C / 760 Degree C) along with air cool.For maximum softness, heat this Alloy Steel F91 Forged Threaded Cross Fitting up to 1500 Degree F / 1650 Degree F (815 Degree C / 900 Degree C) along with slow furnace cool.
Temper this Alloy Steel F91 Forged Threaded Cap Fittings at temperatures appropriate to produce desired mechanical properties.
If this Alloy Steel F91 Forged Threaded Coupling Fittings is tempered in the range 750 Degree F / 1050 Degree F (400 Degree C / 565 Degree C), there will be a decrease in impact strength and in corrosion resistance – depending upon the media.The tempering range 425 Degree C – 600 Degree C in this Alloy Steel F91 Forged Threaded Bend Fitting should be avoided.
Meanwhile, the scaling temperature of our Alloy Steel F91 Forged Threaded Bushing Fitting should be approximately temperature of 650 Degree C.Alloy Steel F91 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged Fittings Alloy Steel F91 Threaded Forged Fitting Chemical Composition GradeCMnSiSPCrMoAlloy Steel F910.08-0.120.3-0.60.50.010.028.5-9.50.85-1.05 Alloy Steel Grade F91 Threaded Forged Fitting Mechanical Properties Tensile StrengthYield Strength (0.2%Offset)Elongation41558520 % Alloy Steel F91 Threaded Forged Fitting Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is a known Manufacture and Exporter of Alloy Steel F9 Threaded Forged Fittings, which is used where both the properties of steel and corrosion resistance are required.
The exposure to chlorides of these Alloy Steel F9 Forged Threaded Elbow Fittings in everyday activities (e.g., food preparation, sports activities, etc.)
is generally satisfactory when proper cleaning is performed after exposure to use.
This also influences its use in commercial kitchens and food processing plants, as our Alloy Steel F9 Forged Threaded Tee Fittings can be steam – cleaned and sterilized and does not need paint or other surface finishes.These Alloy Steel F9 Forged Threaded Cross Fittings can be utilized in a number of capacities and applications including, pump shafts, valve components, and automatic screw machine parts.
Our Alloy Steel F9 Forged Threaded Cap Fittings is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications.Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged FittingsThese Alloy Steel F9 Forged Threaded Bend Fittings differs from carbon steel by the amount of chromium present, where unprotected carbon steel rusts readily when exposed to air and moisture.
This iron oxide film (the rust) is active and accelerates corrosion by making our Alloy Steel F9 Forged Threaded Coupling Fittings easier for more iron oxide to form.
Sachiya Steel International is a Leading Manufacture And Exporter of Alloy Steel F12 Threaded Forged Fittings, which provides valuable property combinations peculiarly well suited for aerospace applications.
In high – heat treated conditions, these Alloy Steel F12 Forged Threaded Elbow Fittings possesses excellent mechanical properties.
Our Alloy Steel F12 Forged Threaded Tee Fittings also provides benefits for other applications requiring high strength and good corrosion resistance – by means of excellent properties at temperatures up to 600 Degree F. These Alloy Steel F12 Forged Threaded Cross Fittings requires three steps in heat treating including austenite conditioning, cooling to transform the austenite to martensitic, and precipitation hardening.This addition in our Alloy Steel F12 Forged Threaded Cap Fittings is made to reduce or eliminate chromium carbide precipitation – resulting from welding or exposure to high temperatures.
These Alloy Steel F12 Forged Threaded Bend Fittings in its cold rolled, hardened and tempered condition is used in countless applications similar to Cold Rolled High Carbon but with the advantages inherent in being excellent alloy and at moderate cost.Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged Fittings| Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged Fittings | Alloy Steel F12 Threaded Forged FittingsOur Alloy Steel F12 Forged Threaded Coupling Fittings in its pre – hardened condition is stocked by us in coils ready for slitting to exact widths for press feed operations or to exact size blanks.
These Alloy Steel F12 Forged Threaded Bend Fittings are just machinable, and then can be age hardened to achieve quite high strengths.Alloy Steel F12 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged FittingsAlloy Steel F12 Threaded Forged Fittings Chemical CompositionGradeCMnSiSPCrMoAlloy Steel F120.15 max0.3-0.60.50.030.034-60.44-0.65Alloy Steel Grade F12 Threaded Forged Fitting Mechanical PropertiesTensile StrengthYield Strength (0.2%Offset)Elongation27548520 %Alloy Steel F12 Threaded Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Alloy 20 Threaded Forged Fittings that is acclaimed for high quality and wide applications.
Due to its nickel, chromium, molybdenum, and copper levels, our Alloy 20 Forged Threaded Elbow(UNS N08020) is ideal for use in corrosive environments.
These Alloy 20 Forged Threaded Tee, which also includes copper and molybdenum, is popular in the production of gasoline, solvents, explosives, chemicals, pharmaceuticals, and food and synthetic materials.Restricted carbon plus columbium stabilization in our Alloy 20 Forged Threaded Cross permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment.
Meanwhile, these Alloy 20 Forged Threaded Cap are also being offered in different sizes and shapes to our customers, where we also offer the same at best prices.
So, depending on who you talk to this alloy may be referred to as our Alloy 20 Forged Threaded Fittings or as a nickel alloy, where either way it is still great for corrosion resistance.Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged FittingsThese Alloy 20 Forged Threaded Coupling is often chosen to solve stress corrosion cracking problems, which may occur with 316L stainless.
Our Alloy 20 Forged Threaded Union of the same name with the designation “Cb-3” indicates Columbium stabilized.
Sachiya Steel International is Pipe Fitting manufacturer in Surat.
We are known as Forged Fittings, Buttweld Fittings, Flanges, Pipes and Tubes, Fasteners manufacturer supplier in Surat.
We manufacture high-quality Pipe Fitting with International Quality Standards(IQS) guidelines.
We are supplier of Pipe Fitting in Surat.
Sachiya Steel International supplies pipe fittings in Stainless Steel, Carbon Steel, Alloy Steel, Copper, Titanium and other grades with Standards such as ASTM / ASME / ANSI / UNS / DIN and other standards.Phone - +91 9769056007Email - [email protected] -https://sachiyasteel.com/stainless-steel-pipe-fitting-manufacturer-new-delhi.php
