Sachiya Steel International is one of the Leading Manufacturer and Exporter of Stainless Steel 347 Tube to Male Fittings, which are very tough and, therefore, readily machined and formed. These Stainless Steel 347 Tube Fittings should be aged at 900 Degree F to 950 Degree F (480 Degree C to 510 Degree C) for three to six hours, where very large cross sections should be aged for longer periods. Stainless Steel 347 Compression Fittings achieve full properties through martensitic precipitation aging – a relatively simple, low temperature heat treatment.
This Stainless Steel 347 Compression Tube Fittings are processed essentially the same as the titanium – bearing 18 % nickel steels. Detailed procedures for machining, cold working, warm working, hot working, welding, nitriding, plating, forging, rolling, solution annealing, as well as recommendations for die casting applications, can be found in Stainless Steel 347 Male Connector Fittings. An additional benefit of these Stainless Steel 347 Ferrule Tube Fittings is the age hardening reaction of these nickel steels.
In the solution annealed condition, Stainless Steel 347 Double Ferrule Tube Fittings are very tough, relatively soft, and therefore, readily machined and formed. After machining or forming these 347 Stainless Steel Male Connector Fittings, a precipitation hardening (aging) process, which requires no protective atmosphere and relatively low furnace temperatures, raises the hardness to a level sufficient for many tooling applications. 347 Stainless Steel Tube Fittings are furnished in the solution annealed condition.
|
Stainless Steel 347 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM A276 ASME SA 479 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 10xC – 1.10 | 9.00 – 13.00 | 62.74 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347 | 1.4550 | S34700 | SUS 347 | – | 08Ch18N12B | – | X6CrNiNb18-10 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 347 Tube to Male Fittings, which are very tough and, therefore, readily machined and formed.
These Stainless Steel 347 Tube Fittings should be aged at 900 Degree F to 950 Degree F (480 Degree C to 510 Degree C) for three to six hours, where very large cross sections should be aged for longer periods.
Stainless Steel 347 Compression Fittings achieve full properties through martensitic precipitation aging – a relatively simple, low temperature heat treatment.
This Stainless Steel 347 Compression Tube Fittings are processed essentially the same as the titanium – bearing 18 % nickel steels.Detailed procedures for machining, cold working, warm working, hot working, welding, nitriding, plating, forging, rolling, solution annealing, as well as recommendations for die casting applications, can be found in Stainless Steel 347 Male Connector Fittings.
An additional benefit of these Stainless Steel 347 Ferrule Tube Fittings is the age hardening reaction of these nickel steels.
In the solution annealed condition, Stainless Steel 347 Double Ferrule Tube Fittings are very tough, relatively soft, and therefore, readily machined and formed.Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male Fittings | Stainless Steel 347 Tube to Male FittingsAfter machining or forming these 347 Stainless Steel Male Connector Fittings, a precipitation hardening (aging) process, which requires no protective atmosphere and relatively low furnace temperatures, raises the hardness to a level sufficient for many tooling applications.
Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347 Tube to Female Pipes, which is a well – ordered arrangement of atoms that can best be pictured as spheres touching one another.
The major component of these Stainless Steel 347 Tube Fittings is iron, a metal that in its pure state is not much harder than copper.
Omitting very extreme cases, iron in its solid state is, like all other metals, polycrystalline — that is, our Stainless Steel 347 Compression Fittings consists of many crystals that join one another on their boundaries.
In these Stainless Steel 347 Female Connector Fittings, carbon is generally found in two forms, where either it is in solid solution in austenite and ferrite or it is found as carbide.Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female Pipes | Stainless Steel 347 Tube to Female PipesOur Stainless Steel 347 Ferrule Fittings are ordered in planes, called lattices, which penetrate one another in specific ways.
For iron, the lattice arrangement in these Stainless Steel 347 Double Ferrule Fittings can best be visualized by a unit cube with eight iron atoms at its corners.
To change the properties of our SS 347 Tube Fittings is by adding alloying elements other than carbon that produce characteristics not achievable in plain carbon steel.
