Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels. The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres. The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F. Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.
In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316. SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures. Ra 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.
Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock. Ra 330 Tube Fittings has oxidation resistance to 2100 Degree F and resistant to carburization and nitriding.
|
Incoloy 330/SS 330/Ra 330 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Incoloy, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Sn | Pb |
| 330 | 0.08 max | 2.00 max | 0.75-1.50 | 0.03 max | 1.00 max | Balance | 34.0-37.0 | 17.0-20.0 | 0.025 | 0.005 max |
| STANDARD | WERKSTOFF NR. | UNS |
| Incoloy 330 | 1.4886 | N08330 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer of Incoloy 330 Tube to Male Fittings to the clients, which is readily welded and is formed much like standard stainless steels.
The ultra – high nickel content of 34 % to 37 % of Inconel 330 Compression Fittings also provides high resistance to chloride stress corrosion cracking and embrittlement from the precipitation of sigma phase in most furnace atmospheres.
The oxidation resistance is also enhanced by the silicon content of Inconel 330 Tube Fittings, where any hot work should commence at 2100 Degree F – 2150 Degree F and finish at 1800 Degree F.Inconel 330 Male Connector Fittings is often used in Condensers, Heat Exchangers, Pulp and Paper Industry etc.
In general, Inconel 330 Compression Tube Fittings outperforms almost all stainless steels along with the higher – carbon variants of 304 and 316.
SS 330 Male Connector Fittings is also used in muffles, retorts, conveyor systems, baskets and boxes and various fixtures.Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male Fittings | Incoloy 330 Tube to Male FittingsRa 330 Male Connector Fittings offers benefits in these conditions including resistance to hydrogen chloride and hydrogen sulfide, and helping to reduce PTA or chloride stress corrosion cracking.
Alloy 330 Male Connector Fittings is an austenitic heat and corrosion resisting alloy offering an exceptional combination of strength and resistance to carburization, oxidation and thermal shock.
Sachiya Steel International is one of the Manufacturer And Exporter of Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes.
Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only.
If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength.
In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking.
Incoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness.
Sachiya Steel International Is a Leading Manufacture And Exporter of Incoloy 330 Threaded Forged Fittings to the clients, where we assure our clients that a quality array is delivered from our end.
Incoloy 330 Forged Threaded Elbow (UNS N08330) is extensively used in high temperature environments where resistance to the combine effects of thermal cycling and carburization is necessary.
The oxidation resistance of Incoloy 330 Forged Threaded Tee is enhanced by the silicon content.
Incoloy 330 Forged Threaded Cross was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry.
Meanwhile, these Incoloy 330 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Forged parts of Incoloy 330 Forged Threaded Fittings should be cooled as quickly as possible, and for best corrosion resistance post – forge annealing is recommended.Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged FittingsThe main reason being we have an excellent warehousing and storage facilities for both finished and semi – finished Incoloy 330 Forged Threaded Coupling in the heart of financial capital of the country, where they are further made ready as per the urgent requirements of the customers.
Sachiya Steel International offers an extensive array of Incoloy 330 Threaded Forged Fittings to the clients, where we assure our clients that a quality array is delivered from our end.
Incoloy 330 Forged Threaded Elbow (UNS N08330) is extensively used in high temperature environments where resistance to the combine effects of thermal cycling and carburization is necessary.
The oxidation resistance of Incoloy 330 Forged Threaded Tee is enhanced by the silicon content.
Incoloy 330 Forged Threaded Cross was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry.
Meanwhile, these Incoloy 330 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Forged parts of Incoloy 330 Forged Threaded Fittings should be cooled as quickly as possible, and for best corrosion resistance post – forge annealing is recommended.Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged FittingsThe main reason being we have an excellent warehousing and storage facilities for both finished and semi – finished Incoloy 330 Forged Threaded Coupling in the heart of financial capital of the country, where they are further made ready as per the urgent requirements of the customers.
