Sachiya Steel International is a Leading Manufacturer And Exporter of Inconel 718 Pipe Fittings, which has excellent welding characteristics and resistant to post – weld age cracking. Inconel 718 Compression Pipe Fittings contains significant amounts of Iron, lowering its price per kilogram while endowing it with precipitation hardening effect. The 1700 Degree F – 1850 Degree F anneal with its corresponding aging treatment as shown earlier is the optimum heat treatment for Inconel 718 Compression Fittings where a combination of rupture life, notch rupture life and rupture ductility is of greatest concern.
Machining in the age hardened condition improves the surface finish and chip action of Inconel 718 Accessories, whereas machinability and tool life are improved when machining material in the solution annealed condition. These Inconel 718 Ferrule Pipe Fittings is available in seamless and welded construction, and has high tensile, yield, and creep – rupture properties at high temperatures and can operate at cryogenic temperatures up to 1200 Degree F (650 Degree C).
Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings
Besides two conventional forging processes of Inconel 718 Double Ferrule Pipe Fittings, including forging driven by hydraulic presses or hammers, and some advanced forging processes, such as hot die forging, insulation die forging and isothermal forging, have been developed to manufacture fine grains forgings. High tolerance to extremely high and low temperatures allows these Alloy 718 Compression Fittings to be welded and annealed into products that will withstand extreme conditions.
Inconel 718 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B166 ASME SB 166 |
| Size | : | 1/16″ – 2″ |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 7180 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Inconel 718 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015max | 0.30 max | – | 50.00 – 55.00 | 17.00 – 21.00 |
Alloy 718 Accessories Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Equivalent Grades for 718 Inconel Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | – | – | – | – | – |
Alloy 718 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Pipe Fittings
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Union Fittings to the clients, which is widely demanded for its durability and sturdiness.
These Inconel 718 Tube Fittings (UNS N07718) has excellent creep – rupture strength at temperatures up to 700 Degree C (1300 Degree F).
Our Inconel 718 Compression Fittings also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures.
These Inconel 718 Ferrule Fittings can be readily worked and age hardened, which further has higher strength than Inconel X – 750 Ferrule Fittings.Our Inconel 718 Double Ferrule Fittings is a precipitation – harden able nickel – chromium alloy containing also significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium.
Meanwhile, these Inconel 718 Union Fittings are also being offered in different sizes and shapes to our customers.
If the material is to be machined, formed, or welded, our Inconel 718 Compression Tube Fittings typically is purchased in the mill annealed or stress relieved condition.Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union FittingsThese Alloy 718 Tube Fittings has resistant to aqueous corrosion and chloride ion stress corrosion cracking.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.
Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).
These Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.
The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.
Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.
Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).
In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.
The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.
Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male FittingsThese Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.
Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
Sachiya Steel International offers a wide range of Inconel 718 Threaded Forged Fittings to the clients, which are tested for its quality before being introduced in the market.
Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength.
Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Nimonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings.
Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.
Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium.
Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers.
