Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality SMO 254 Pipe Fittings, which gives better guaranteed corrosion resistance. These SMO 254 Compression Pipe Fittings resists chloride environments and sulphide stress corrosion. SMO 254 Compression Fittings is also roughly double the strength of standard austenitic stainless steels. We recommend a maximum hot forming temperature of these SMO 254 Ferrule Pipe Fittings between the range of 2010 Degree F and 2100 Degree F (1100 Degree to 1150 Degree C).
If the shape of the work piece is not compact, the edges of SMO 254 Double Ferrule Pipe Fittings may be significantly cooler than the bulk, and there is risk of cracking in the cooler regions. These SMO 254 Accessories are somewhat more difficult to machine than the 300 series austenitic stainless steels. Higher cutting forces in Alloy 254 Compression Pipe Fittings are required and more rapid tool wear is typical, where the high strength can pose problems.
SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings | SMO 254 Pipe Fittings
These Alloy 254 Ferrule Pipe Fittings is not generally suitable for use at temperatures above 300 Degree C as it suffers from precipitation neither of brittle micro constituents, nor below -50 Degree C because of its ductile – to – brittle – transition. Alloy 254 Double Ferrule Pipe Fittings has excellent general corrosion resistance; superior to Grade 316 in most environments. These Alloy 254 Accessories has excellent resistance to localized corrosion including inter – granular, pitting and crevice corrosion.
Alloy 254 Pipe Fittings / Accessories Specifications |
||
Specifications | : | ASTM A403 ASME SA 182 |
Tube Size | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Pressure Rating | : | 6000PSI for SMO |
SMO 254 Pipe Fittings Chemical Composition
Grade | C | Mn | Si | Cu | S | P | Mo | Ni | Cr |
SMO 254 | 0.02 | 1 | 0.08 | 0.5-1.0 | 0.01 | 0.03 | 6.0-6.5 | 17.5-18.5 | 19.5-20.5 |
Alloy 254 Accessories Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8 g/cm3 | 1320-1390 ℃ | 650 | 300 | 35 % |
Equivalent Grades for 254 SMO Pipe Fittings
STANDARD | WERKSTOFF NR. | UNS | SIS | BS | GOST | AFNOR | EN |
SMO 254 | 1.4547 | S31254 | 2378 | – | – | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 |
SMO 254 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Pipe Fittings