Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Round Bars, which is extremely resistant to corrosion, even in acidic environment. Our Incoloy 825 Square Bars is also used in Chemical process equipment, Tank trucks, Propeller shafts, Electrostatic precipitator electrodes, Calorifiers, Hot vessels for food, water and sea – water. The fabrication of these Incoloy 825 Flat Bars is typical of nickel – base alloys, with material being readily formable and weldable by a variety of techniques. The titanium addition serves, by means of an appropriate heat treatment, to stabilize our Incoloy 825 Threaded Bars against sensitization to inter – granular corrosion.
These Incoloy 825 Hollow Bars is characterized by good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 Degree C (1020 Degree F). Our Incoloy 825 Hexagonal Bars is a nickel – base alloy generally similar to Alloy 20 in aqueous corrosion, which requires no post – weld heat treatment. These Incoloy 825 Triangular Bars has good stress corrosion cracking resistance performance, along with good resistance for pitting and crevice corrosion performance.
Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars
Our Incoloy 825 Bars is a nickel – iron – chromium alloy with molybdenum and copper added to it, which is often used for components in pickling equipment like tanks, baskets, chains and heating coils. These Incoloy 825 Rods is an austenitic nickel – iron – chromium alloy with additions of other alloying elements to enhance resistance to chemical corrosion.
Incoloy 825 Round Bar Specifications |
||
Specifications | : | ASTM B425 / ASTM SB425 |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size |
: | 5 mm To 500 mm |
Diameter | : | 0.1 mm to 100 mm |
Length | : | 100 mm To 3000 mm Long & Above |
Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
825 Incoloy Round Bar Chemical Composition
Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe | Ti |
Incoloy 800 | 0.05 max | 1.00 max | 0.05 max | 0.02 max | 0.03 max | 19.50-23.50 | 1.50-3.00 | 38.0-46.0 | 22.0 min | 0.06 – 1.20 |
Incoloy Alloy 825 Rods Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Round Bar
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Steel Pipe Factory