Sachiya Steel International is one of the Leading Manufacturer And Exporter of Alloy Steel F22 Threaded Forged Fittings, which has reasonably good cold working properties and can be moderately drawn and formed in the annealed condition. Because of the wide range of widths and thicknesses and the variety of tempers produced in our Alloy Steel F22 Forged Threaded Elbow Fitting and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled in these Alloy Steel F22 Forged Threaded Tee Fittings cannot be guaranteed.
This aging treatment in our Alloy Steel F22 Forged Threaded Cross Fittings is so low in temperature that there is no significant distortion. These Alloy Steel F22 Forged Threaded Cap Fitting are therefore well suited to production of long shafts, which require no re – straightening after heat treatment. Parts of our Alloy Steel F22 Forged Threaded Coupling Fitting should be preheated at 350 Degree F / 400 Degree F (180 Degree C / 205 Degree C) to prevent cracking, particularly in heavy sections. Since these Alloy Steel F22 Forged Threaded Bend Fittings is air hardening, parts should be annealed immediately after welding.
Our Alloy Steel F22 Forged Threaded Union Fitting are therefore well suited to production of long shafts, which require no re – straightening after heat treatment. For better machinability, these Alloy Steel F22 Forged Threaded Bushing Fittings reduces annealing temperature to give higher hardness.
|
Alloy Steel F22 Threaded Forged Fitting Specifications
|
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/2″ NB TO 48″ NB. |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Forged Fittings |
| Grade | C | Mn | Si | S | P | Cr | Mo |
| Alloy Steel F22 | 0.05-0.15 | 0.3-0.6 | 0.5 | 0.03 | 0.045 | 0.8-1.25 | 0.44-0.65 |
| Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 205 | 415 | 20 % |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Steel International
Sachiya Steel International is a known Manufacture and Exporter of Alloy Steel F22 Threaded Forged Fittings, which has reasonably good cold working properties and can be moderately drawn and formed in the annealed condition.
Because of the wide range of widths and thicknesses and the variety of tempers produced in our Alloy Steel F22 Forged Threaded Elbow Fittings and cut lengths, no flatness tolerances have been established for cold rolled stainless steel.
Flatness on temper rolled in these Alloy Steel F22 Forged Threaded Tee Fittings cannot be guaranteed.This aging treatment in our Alloy Steel F22 Forged Threaded Cross Fittings is so low in temperature that there is no significant distortion.
These Alloy Steel F22 Forged Threaded Cap Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment.
Parts of our Alloy Steel F22 Forged Threaded Coupling Fittings should be preheated at 350 Degree F / 400 Degree F (180 Degree C / 205 Degree C) to prevent cracking, particularly in heavy sections.Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged FittingsSince these Alloy Steel F22 Forged Threaded Bend Fittings is air hardening, parts should be annealed immediately after welding.
Our Alloy Steel F22 Forged Threaded Union Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment.
Sachiya Steel International is a Leading Manufacture And Exporter of Alloy Steel F22 Threaded Forged Fittings, which has reasonably good cold working properties and can be moderately drawn and formed in the annealed condition.
Because of the wide range of widths and thicknesses and the variety of tempers produced in our Alloy Steel F22 Forged Threaded Elbow Fittings and cut lengths, no flatness tolerances have been established for cold rolled stainless steel.Flatness on temper rolled in these Alloy Steel F22 Forged Threaded Tee Fittings cannot be guaranteed.
This aging treatment in our Alloy Steel F22 Forged Threaded Cross Fittings is so low in temperature that there is no significant distortion.
These Alloy Steel F22 Forged Threaded Cap Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment.
Parts of our Alloy Steel F22 Forged Threaded Coupling Fittings should be preheated at 350 Degree F / 400 Degree F (180 Degree C / 205 Degree C) to prevent cracking, particularly in heavy sections.Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged Fittings | Alloy Steel F22 Threaded Forged FittingsSince these Alloy Steel F22 Forged Threaded Bend Fittings is air hardening, parts should be annealed immediately after welding.
Our Alloy Steel F22 Forged Threaded Union Fittings are therefore well suited to production of long shafts, which require no re – straightening after heat treatment.
Sachiya Steel International is a known Manufacture and Exporter of Alloy Steel F9 Threaded Forged Fittings, which is used where both the properties of steel and corrosion resistance are required.
The exposure to chlorides of these Alloy Steel F9 Forged Threaded Elbow Fittings in everyday activities (e.g., food preparation, sports activities, etc.)
is generally satisfactory when proper cleaning is performed after exposure to use.
This also influences its use in commercial kitchens and food processing plants, as our Alloy Steel F9 Forged Threaded Tee Fittings can be steam – cleaned and sterilized and does not need paint or other surface finishes.These Alloy Steel F9 Forged Threaded Cross Fittings can be utilized in a number of capacities and applications including, pump shafts, valve components, and automatic screw machine parts.
Our Alloy Steel F9 Forged Threaded Cap Fittings is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications.Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged Fittings | Alloy Steel F9 Threaded Forged FittingsThese Alloy Steel F9 Forged Threaded Bend Fittings differs from carbon steel by the amount of chromium present, where unprotected carbon steel rusts readily when exposed to air and moisture.
This iron oxide film (the rust) is active and accelerates corrosion by making our Alloy Steel F9 Forged Threaded Coupling Fittings easier for more iron oxide to form.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Alloy Steel F9 Threaded Forged Fittings, which is used where both the properties of steel and corrosion resistance are required.
The exposure to chlorides of these Alloy Steel F9 Forged Threaded Elbow Fittings in everyday activities (e.g., food preparation, sports activities, etc.)
is generally satisfactory when proper cleaning is performed after exposure to use.
This also influences its use in commercial kitchens and food processing plants, as our Alloy Steel F9 Forged Threaded Tee Fitting can be steam – cleaned and sterilized and does not need paint or other surface finishes.These Alloy Steel F9 Forged Threaded Cross Fitting can be utilized in a number of capacities and applications including, pump shafts, valve components, and automatic screw machine parts.
Our Alloy Steel F9 Forged Threaded Cap Fitting is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications.
These Alloy Steel F9 Forged Threaded Bend Fitting differs from carbon steel by the amount of chromium present, where unprotected carbon steel rusts readily when exposed to air and moisture.This iron oxide film (the rust) is active and accelerates corrosion by making our Alloy Steel F9 Forged Threaded Coupling Fittings easier for more iron oxide to form.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Alloy 20 Threaded Forged Fittings that is acclaimed for high quality and wide applications.
Due to its nickel, chromium, molybdenum, and copper levels, our Alloy 20 Forged Threaded Elbow(UNS N08020) is ideal for use in corrosive environments.
These Alloy 20 Forged Threaded Tee, which also includes copper and molybdenum, is popular in the production of gasoline, solvents, explosives, chemicals, pharmaceuticals, and food and synthetic materials.Restricted carbon plus columbium stabilization in our Alloy 20 Forged Threaded Cross permits welded fabrications to be used in corrosive environments, normally without post-weld heat treatment.
Meanwhile, these Alloy 20 Forged Threaded Cap are also being offered in different sizes and shapes to our customers, where we also offer the same at best prices.
So, depending on who you talk to this alloy may be referred to as our Alloy 20 Forged Threaded Fittings or as a nickel alloy, where either way it is still great for corrosion resistance.Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged Fittings | Alloy 20 Threaded Forged FittingsThese Alloy 20 Forged Threaded Coupling is often chosen to solve stress corrosion cracking problems, which may occur with 316L stainless.
Our Alloy 20 Forged Threaded Union of the same name with the designation “Cb-3” indicates Columbium stabilized.
