INCONEL ROUND BARS MANUFACTURERS IN INDIA

Sachiya Steel International offers an extensive collection of Inconel 601 Plate, which are extensively appropriate for dissimilar purposes in dissimilar industries.

Inconel 601 Plates is useful for chemical progression machinery such as process heaters, condenser tubes and combustor components.

Inconel 601 Coils has been effectively used in the following uses, such as annealing, sintering muffles, retorts and copper brazing.Inconel 601 Slatting Coils has excellent resistance to aqueous corrosion.

Inconel 601 Perforated Coils has excellent hot corrosion resistance under oxidizing environments.

Alloy 601 Coils stands out because of its resistance to soaring temperature oxidation, where we also offer the same at industry leading prices.Inconel 601 Plate | Inconel 601 Plate | Inconel 601 Plate | Inconel 601 Plate | Inconel 601 PlateAlloy 601 Slatting Coils has excellent oxidation resistance and also has good resistance to carburizing but should not be used in atmospheres containing sulfur content.

Alloy 601 Perforated Coils must be cooled as rapidly as possible through the range 1400 Degree F to 1000 Degree F. Nickel-Alloy 601 Sheets is often used for thermal reactors in exhaust system of petrol engines.Nickel-Alloy 601 Plates is also used for combustor components and catalyst grid supports in equipment for nitric acid production.

Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.

The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.

Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.

Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).

In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.

The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.

Sachiya Steel International offers a wide range of Inconel 600 Angle, which has high strength properties, worthy workability and good weldability.

Age – hardening treatments are not required, as Inconel 600 Angle is hardened and strengthened through cold work only.

Inconel 600 C-Channel is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content, where low sulfur plummeting furnace environments should be utilized in forging.

Inconel 600 H-Beam is resistant to a wide range of corrosive media and has developed into a wide spectrum of applications for high temperature strength and corrosion resistance.For heavy hot work in Inconel 600 I-Beam, the range should be in between 1900 Degree F and 2250 Degree F (1040 Degree C and 1230 Degree C); light work can be done to 1600 Degree F (870 Degree C).

Inconel 600 T-Beam is a superior choice for gas turbine components including jet engines, titanium dioxide plants and chlorination equipment to 1000 Degree F.The chromium content of Inconel 600 Chain gives better resistance than Nickel 200 and Nickel 201 under oxidizing conditions, at the same time the high nickel gives good resistance to reducing conditions.

Fine grain Alloy 600 Angle typically has better corrosion resistance as well as fatigue, impact and higher tensile properties.

Sachiya Steel International offers a wide range of Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling.

Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on.

This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on.

Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment.

This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes.

Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys.This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments.

Sachiya Steel International offers a wide range of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.

These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.

Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.

Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.

Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.

These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F.Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.