logo
logo
Sign in

Dynamo Walking Cane

avatar
EPower
Dynamo Walking Cane

I'm very careful very careful to go right down the center of that and I'm gonna need me very carefully be right directly level and go through this side going through the same hole all right I'm going to drill a hole right up here and that's where the end of the 550 cord will go so that it won't it won't actually slip and slide it's actually going to terminate right here with a knot so I need to drill a little hole to make that happen actually probably need to measure Dynamo Walking Cane here first 12 right so it needs to be right there it's a good thing that I measured okay because this is where the wrap should start Wood is a little slick hard to get this thing started perfectly all right that would be the hole for the 550 cord and what I'm gonna do is I'm going to countersink one side because I'm I'm just gonna tie a knot in the very end of that 550 cord so I'm gonna put a little bit of a countersink to it the use of this countersink and that way the knot is basically inside the wood and it's not sticking out there we go and that should hide the not real well.

 

Where it terminates alright I'm gonna pre-drill this hole here so that the hook can go straight in once again it's kind of slick wood so it's hard to get it started you can't actually start this with a smaller drill bit drill yourself in the hand so it only has to be thought that far is good enough that's about an inch and a quarter oh yeah that's beautiful what I'm gonna do is put a little wd-40 in here and that will actually prevent any if moisture gets in here it'll prevent it from getting in and doing a number on the wood and just makes the this can went a little bit easier as well if it gets too hard to put in you might need to get a screwdriver and put it inside this to get it to go a little bit further it looks like it's going pretty easily by hand.

 

So I'm not gonna have to use that and I am right at the end that's looking good all right now it's time to mix up some five-minute epoxy and I'm gonna mix it directly into the 3/4 inch cap these are nice because it gives an equal amount of both ingredients so that it is a good of course if you get it Bigfoot Cane on backwards it could glue the tip to it but so I have a donor stick and I'm just going to mix it up inside here no huge rush because you got 5 minutes but you want to make sure that it's good and mixed so their dry is good and hard and you could even slather it up the edges too cuz well this is gonna be the bottom the foot of the stab to help protect it from their terrain rocks or whatever that just goes right on there like that now I'll tip it up the other way so it doesn't start leaking out there we go we'll just let that dry and that should be good to go all right so I got a bunch of band-aids and got some fishing hooks.

collect
0
avatar
EPower
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more