Struggling with the setup of Brother printer? Wondering how to connect the brother printer to the WiFi network? Well! If you are a new user of Brother printer and looking for a step-by-step guide for Connecting WLAN Brother Printer then you are in the right place. Brother is a famous company that offers an incredible range of printers. If you want to connect your Brother printer to a wireless network then make sure that you have completed the setup of your Brother printer. Network SSID and WiFi password is also required to connect the Brother printer to the wireless network.
Steps for connecting WLAN Brother printer
You can check either the base or side of the WLAN access point to find out the SSID name and network password. If still, you are not able to find the SSID name and network key then you can refer to the user manual. Follow the below-mentioned steps to connect the WLAN Brother printer:
Step 1: In the first step, turn on your WiFi router. Make sure that the printer is placed within the range of the WiFi network.
Step 2: Now, plug the power cord of the Brother printer into the power outlet and then turn on your printer.
Step 3: After that, move to the Brother printer and press the menu button on it.
Step 4: Then, use the up and down arrow to select the “network” option and hit on the ok button.
Step 5: Again, use the up and down arrow, select the “WLAN” option and then press the ok button.
Step 6: Thereafter, use the up and down arrow to select the “setup wizard” option and then again hit on the ok button.
Step 7: Now, select the “WiFi enable” option and then click on the yes button.
Step 8: After that, your Brother printer will automatically scan the wireless network and display a list for you.
Step 9: Next, you need to select the WiFi network from the available list and then click on the ok button.
Step 10: Then, it will prompt you to enter the password for your wireless network. You need to type the correct WiFi password and then hit on the ok button.
Step 11: Finally, your Brother printer is successfully connected to the WiFi network.
Steps to connect Brother printer to WiFi network on Mac
Go through the below-mentioned steps to connect the WLAN Brother printer on Mac device:
Step 1: First and foremost, connect your Brother printer and Mac device through a USB cable.
Step 2: Now, press the WiFi button and hold it until the indicator starts flickering.
Step 3: Then, start the printer setting tool on your Mac computer and then click on the “communication settings” button.
Step 4: After that, go to the “General” tab and select the “WLAN” option for “selected interface” and then select the “infrastructure” option for “communication” mode.
Step 5: Next, enter the SSID and password for your wireless network and finally, tap on the apply button.
That’s all! Hopefully, this detailed blog about Connecting WLAN Brother Printer will help you to connect the Brother printer to a wireless LAN network.
Comments
