In order to Reset Lexmark Printer to factory settings, by resetting the printer to the default settings or turn it off while pressing and holding the Check Mark and Go-Right buttons simultaneously. In the Control Panel of a Lexmark shown below hold the buttons 6 and 7 while turning the printer on it appear with yellow progress dots as it goes through its boot-up process. Once the printer has displayed two or three of those dots, or more, let it continue its boot-up procedure. Release the buttons and let the printer continue until its boot-up procedure. Once the printer has finished the boot-up sequence, The printer will display a CONFIG MENU on the Control Panel. Next, follow the menus until you reach the Factory Defaults option. Once you see the Factory Defaults option, click the Check Mark button () to select it. Your printer will now be reset to factory settings.In order to Reset Lexmark printer memory, you will need to follow these steps.
So here are a few steps that you should follow to Reset Lexmark Printer.
- At first From your printer menu's home screen, select Settings and press the OK button.
- Select General Settings and press the OK button.
- Select Factory Defaults and press the OK.
- Select Restore Now and Press OK.
How to Refill Lexmark Cartridges & Reset the Chip
Step 1: Place the cartridge on paper towels.
Step 2: Peal off the cartridge’s top label. There should be only one label on the cartridge, so you shouldn’t have problem locating it.
Step 3: Fill the syringe with about 25 ml of ink, if it’s a black cartridge, or approximately 15 ml of ink, if it’s a color cartridge. The amount of ink also depends on the cartridge capacity. If you’re refilling a single-color cartridge, inject the ink slowly into one of the holes underneath the label you peeled off. You can inject into any hole because they all go to the same sponge. After refilling the ink, you may leave the top label off. Its absence doesn’t affect the printing quality.
Step 4: Put the cartridge back into the printer.
