logo
logo
Sign in

Different Types of Circuit Breakers

avatar
McCoy Mart
Different Types of Circuit Breakers

We have a few listed for you:

Havells MCB SP B Curve 32 A

  • It is suitable for protection against overload and short circuits for lighting and other domestic loads
  • The current capacity is 32 A
  • There is no pole
  • -Type B curve
  • To avoid improper cable termination,the safety terminals guides the cable towards the cape terminal for systematic termination.
  • Every device is provided with a duck position DIN rail clip.

So it becomes much easier to charge a device from a device bank connected to a bus bar, without disturbing the existing way.

  • It is suitable for cupper and aluminium cables, these terminals are compatible with cables upto 35 mm 2 cross section areas.
  • Grooves are provided on the outer body, so that when individual are put adjacent to each other in a distribution board forming a very effective channel for better circulation of air, which results in a cooler operation.
  • A hammer directly connected to the plunger strikes on the moving contact with a force proportional to the peak current forcibly separating the many contacts, much before the latch mechanism operates.
  • This reduces the operating time of the circuit breaker.
  • It consumes less power, thus it is cost effective and energy sharing.
  • The arc extinguishing device comprises of 13 plates arc chute. The arc under the influence of magnetic fields and arc guide is moved into the arc chute where it is rapidly split and burnt out.
  • -A circuit breaker, the moving conacts of which return to and move to the open position where the automatic opening operates is initiated after the initiation of the closing operation, even if the closing command is maintained. 

Havells MCB DPC curve 63 A circuit breaker

The current it holds is upto 63A.There are 2 poles and there is a type C curve. To avoid improper cable termination, the safety terminals guide, the safety terminals guide the cable towards the ccq terminal for systematic termination.

Every device is given a dual DIN rail clip, so then it becomes easier to change a device from a device bowl connected to a bus bar without disturbing the existing wiring.

Suitable for copper and aluminium cables, these terminals are compatible with cables upto 35 mm 2 cross.

  • Grooves are provided on the outer body, so that when individual poles are placed adjacent to each other, in a distribution board, it happens to form a very, very effective sort of channel for air circulation, resulting in a cooler operation.
  • A circuit breaker, the moving contacts of which return to and remain in the open position when automatic opening operators is initiated after the initiated offer the initiation of the closing operation, even if the closing command is maintained.

So here was a short story about circuit breakers of different types for you to look at.


Visit: McCoy Mart

collect
0
avatar
McCoy Mart
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more