logo
logo
Sign in

Paw Patrol Car Seat Instructions

avatar
James T
Paw Patrol Car Seat Instructions

Perfect car seat for toddlers, preschoolers, or school-age kids


Once a child has out grown the rear-facing weight and height limit they should switch to the forward-facing seat view as the height limit for most rear-facing car seats suggests that there must be one inch of gap between the top of the car seat and the child’s head.

 

paw patrol car seat are kids ultimate favorite. Which makes ita go-to purchase for parents who are looking for forward-facing car seats for toddlers or older children. It has a weight limit of minimum 22 pounds and maximum 100 pounds and the height limit starts from 29 inches up to 57 inches. Therefore, it’s well suited for toddlers as well as school kids.

 

What makes it amazing is its 2 positions crotch belt and 3 positions adjustable height headrest which is specially made with the eps foam which dissipates crash energy by not allowing it to reach the brain or body giving greater protection and comfort to the child.

 

Image Credit : unmoon production Website


 

Paw Patrol Car Seat Easy Installation and Safety Instructions!

 

If you have a child seat manual, then follow the instructions for installation from there. If not, follow these steps:

 

  • For installing the car seat with a seat belt and Tether

 

  • First put the car seat in the back seat of your vehicle in a forward-facing position

 

  • Carefully thread the seat belt through the forward-facing belt part and be careful of any twists in the seat belt.

 

  • Buckle and lock the seat belt.

 

  • Press down firmly on the car seat and tighten it. The car seat shouldn’t be able to move side to side or front to back more than one inch.

 

  • Connect the tether (upper and lower) found on the car seat to your vehicle’s tether anchor and tighten. It’s important as it limits movement in case of a crash.

 

 

For seating the child correctly:

 

Booster seats generally have a plastic clip or guide to correctly position vehicle lap and shoulder belts. Just make sure about two things when using booster seats:

 

1.    Firstly, the lap belt lies low and snug across your child's upper thighs. The belt should be flat and not twisted from anywhere.

 

2.    Secondly, Place the chest clip at armpit level. It holds harness straps in place. The belt should cross only the middle of your child's chest and his side shoulder and itshould always be away from the child’s neck.

 

 

Note: Parents should always read the car safety instruction manual before installing the car seat for a child. It is vital that the car safety seat is installed properly, and the harness fits the child securely

collect
0
avatar
James T
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more