Your air compressor is very sophisticated equipment and one of your most precious assets. It's vital to know how to diagnose your air compressor if it breaks down. It's a significant investment for any business and crucial to operations. It's critical to know what to do if it goes down.
Troubleshooting Your Air Compressor: 10 Essential Tips
Excessive Noise in Operation - If the nitrogen air compressor is making more noise than usual, it might be due to a loose pulley, flywheel, belt, cooler, or accessories, among other things. Tightening these should help. You should also inspect for any damage to the bearings and apply oil to the crankcase.
It's also possible that the floor mounting is loose and needs to be tightened. At this stage, you may also wish to replace the vibration pads.
There may be a leak somewhere in the compressor line if there isn't enough pressure in use. It's critical to check for leaks or obstructions and the hose or piping at this stage. If you discover something, it is simple to fix. It's also possible that the air filter needs to be replaced.
Air is Blowing Out of the Inlet Valve - A damaged first stage inlet valve might cause this. The valve assembly would need to be changed in this case.
Excessive Belt Wear - There are various reasons for excessive belt wear. If the pulley is out of alignment, it must be adjusted with the compressor flywheel. You must correct the tension on the belt if it is too loose or too tight. Check for a worn crankshaft, keyway, or pulley bore if there is a wobbling. Running with loose pulleys might cause these issues.
Excessive Fusing — If this is a frequent issue for you, it might be as easy as double-checking that the fuses have the correct ampere and rating for the job. There might also be a problem with the system's power or a faulty unloader or check valve. It may be time to replace or repair something. You should also inspect the belt to determine if it needs to be adjusted.
Excessive Oil Consumption - Various factors might contribute to excessive oil consumption. There may be a restriction in airflow that may be remedied by cleaning or changing the air filter. If the problem is an oil leak, tightening bolts or changing the gasket may be the solution.
If you've tried everything to troubleshoot your air compressor and it's still not working, it's time to call air compressor dryer rental Services. It's also important to note that preventative maintenance might help you avoid difficulties in the first place.
