logo
logo
Sign in

How to Fix Error Code B200 on Canon Pixma MX922?

avatar
Matthew Paul
How to Fix Error Code B200 on Canon Pixma MX922?

Canon is a well-known manufacturer of imaging products such as cameras, photocopiers, projectors, and other electronic devices. Canon is also well-known for their printers. Canon offers dependable and sturdy printing capabilities, as well as fast printing speeds. However, after a period of smooth operation, Canon printers begin to display a variety of problems. From time to time, you may see various error messages. When you need to print an essential document but your system displays an error message, it can be very annoying. Canon Printer error code b200 is the most common error you'll encounter when using Canon printers. The most common reason of this error is when you print and the cartridge becomes completely empty. This error can also occur when you use a third-party cartridge and your printer is unable to cope with it. Cleaning the printhead can sometimes assist with the Canon b200 issue. However, this is hardly a long-term Troubleshoot Canon mx922 to their mistake. If you want to permanently fix this problem, you should look for other options. This error can also happen if you use different ink in the printer or if you refill or replace the cartridge with a low-cost one.

The Best ways to fix Canon mx922 b200 problem

Canon Printer mx922 Error b200 is one of the most common error codes encountered by Canon printer users all over the world, particularly those using the Pixma series. Several solutions exist to alleviate the Canon support code b200, and this article outlines several simple and quick Troubleshoot Canon mx922 error code b200.

Solution 1: Clean your printer's printhead.

  • Turn your printer off.
  • Disconnect the printer from the power supply.
  • Open your printer's back lid.
  • Remove the printer's ink cartridge.
  • Carefully remove the printhead.
  • Clean the contact pads in the printer using contact cleaner.
  • Reinstall the printhead when it has been successfully cleaned.
  • Replace the ink cartridge now.
  • All power wires should be connected.
  • Turn on the printer.

Now run your printer in auto head alignment mode to see how it works.

Solution 2: Close the cover halfway.

  • Turn the printer off.
  • Disconnect the printer from the power supply.
  • Change the ink by opening the cover.
  • Turn on the printer now.
  • Turn on your printer.
  • Allow the print carriage to advance to the left until it reaches the centre.
  • Before it reaches the left side, close the cover.

Now try printing the document; if your Canon mx922 is not printing, look for other options.

Solution 3: Use alcohol to clean the print head.

  • Activate your Canon printer.
  • Take off the ink cartridge.
  • Remove the printhead.
  • Remove the power cord from the printer and turn it off (Do not close the power button)
  • Clean the electric pins with isopropyl alcohol (your printhead)
  • Make sure your printhead is completely clean.
  • Reinstall the printhead after cleaning the electronic pins.
  • Connect the printer now.
  • Set the printer to normal.

Check whether the print head on your Canon Pixma mx922 is working or not.

Solution 4: Clean the cartridge

  • Turn your Canon printer off.
  • Disconnect the printer from the power supply.
  • Remove the ink cartridge from the printer by opening the lid.
  • Remove the sled that contained the cartridges and clean your ink cartridges with water.
  • You can also use isopropanol to avoid clogging the Canon printhead.
  • Make sure the contacts (the golden ones) do not get wet (it may damage the print head)
  • To prevent water from entering the printer, properly dry the cartridges and other equipment.
  • Carefully restore the carriages and ink cartridges.
  • Switch on your printer.

Now try printing something from your Canon printer. If the problem with your printer persists, you should attempt Canon mx922 support code.

Restarting the power may help. Support Code B200 for Canon MX922

If your computer is experiencing runtime issues, forcing a restart may be the solution. Disconnect your printer from your computer and then violently restart it. Connect your printer and restart your computer. Give the print command and see if your Canon MX922 issue B200 has been resolved. If it doesn't work, try restarting your device. Remove the Canon Printer from the computer and power source. Wait 4-5 minutes before reconnecting it. Open the file you wish to print and then press the Print command. Check to see whether the Canon Pixma Mx 922 B200 faults have been resolved.

Examine the ink cartridge.

One of the most common reasons of printer errors is ink cartridges. You won't be able to remove the printouts if your ink cartridges have an error. Your ink may have dried up if you haven't taken prints in a long time. In that situation, the ink level warning message may appear on the screen. Remove the ink cartridge by opening the back cover. Now carefully remove the Canon ink cartridge. Check the drum for ink levels. If the ink becomes too dry, a few drops of water should be added. Only a few drops of water or similar solvent should be added to the lid. Close the cover and shake it vigorously. Wait for the ink to get diluted. Close the back cover after gently inserting the cartridge into the printer. Connect the printer to the computer now and print. If you can print, your B200 Error Canon MX922 is fixed, but if not, you should look for alternative solutions.

Replace the cartridge.

If your ink cartridge is empty, you should replace it as soon as possible. Third-party cartridges may harm your printer or result in fading printouts, so always buy the genuine cartridge. However, if you print hundreds of pages every day, buying a new cartridge every time will be costly, and discarding cartridges in the open is harmful due to the carbon content. You can also refill your cartridges.

Look for a paper jam.

If you have an older Canon printer, you may experience frequent paper jams. Paper jams are most commonly caused by a piece of paper becoming stuck inside the printer or the printer drawing several papers for the paper tray. Remove all debris from the printer by opening it. Check to see if the Canon MX922 B200 fault has been resolved. If you're still having problems with your printer, contact Canon for assistance.

The print quality and speed of Canon printers are well-known. However, you may encounter a few difficulties when utilizing a Canon printer. Canon mx922 error code b200 is a typical printer error that many users have encountered. When your printer's printhead fails, this Canon occurs.

Know More: canon mx922 || mx922 reset button || canon mx922 fax || canon pixma mx922 how to load paper || canon mx922 connect to iphone || canon mx922 double sided copy || canon mx922 cloud print || how to scan using canon mx922


collect
0
avatar
Matthew Paul
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more