PVC (polyvinyl chloride) pipes are known for their long-lasting and lightweight qualities, making them a viable sewage, plumbing, and irrigation alternative. PVC pipes are typically recognizable by their white or cream color and are joined with couplings and solvent cement, which melts the surface layer of the pipes and bonds them together.
To keep the leakage under control, most PVC defects can be repaired to the existing pipe. If the damage is severe enough, the pipe may need to be completely replaced. We've outlined two methods for repairing or replacing your PVC pipes to help you get started.
Some of the most prevalent reasons for PVC pipe repairs and replacements offered by pipe repair service Salt Lake City professionals include:
Improper installation — A leak might occur if a PVC fitting is not properly placed onto the joining pipe. A loose-fitting that allows water to leak through is frequently to blame.
Wrong adhesive glue — To avoid premature deterioration, make sure you select the suitable PVC cement. Before you choose a glue, check the label to be sure it's designed to stick to PVC. Even if you use the right adhesive, it will ultimately deteriorate and need to be replaced.
Freezing temperatures — Although PVC is resistant to freezing, it can nevertheless become brittle and broken in extremely cold weather. If you reside in a region where the weather is cold, insulate your pipes to keep them from freezing.
How to Repair Damaged PVC Pipes
Here are two ways to repair or replace your PVC pipe, ranging from epoxy and rubber tape to hose clamps and fiberglass.
1. Cloth or Fiberglass Resin Tape
Fiberglass resin tape can be used to slow the damage caused by a leaking PVC pipe as a temporary fix. By employing a water-activated glue that hardens around the pipe and inhibits the leakage, the fiberglass tape makes repair straightforward. Before applying the tape, wipe the damaged section of the PVC pipe with a moist rag. Wrap the tape around the injured area while the resin is still wet, then wait 15 minutes for the resin to cure.
2. Epoxy Restoration Epoxy is a putty-like substance that can be used to repair PVC pipe leaks and joints. To use epoxy to repair a pipe or joint, clean and dry the damaged area first, making sure water can't get to it.
If necessary, follow the manufacturer's instructions for mixing the putty or liquid. Afterwards, apply the epoxy and let it cure for ten minutes. Allow water to flow through the pipe after curing to check for leaks.
Apart from this you can learn about the sewer pipe repair cost Salt Lake City from the professionals.
